4 layers100 × 66 mm
2 layers147.8 × 100 mm
Bpi r1-can ser
ci-rt/testbox-shield2- Size
- 147.8 × 100 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 59
- Nets
- 61
- Pads
- 281
- Tracks, vias
- 754, 16
- Pours
- 10
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 11 Mar 2018
- Updated
- 18 Oct 2018
Overview
Bpi r1-can ser is an open-source printed circuit board by ci-rt, from the ci-rt/testbox-shield repository on GitHub. It is a 2-layer board of 147.8 × 100 mm with 59 parts on 61 nets, routed with 754 tracks and 16 vias.
It is built around the MAX3232ID, 24LC08B/P and HCPL0637, with the HE721C0500 among its other parts. Its parts include 29 connectors, 10 resistors, 8 capacitors, 6 ICs and 2 switches.
Main components
4
MAX3232ID
SOIC-16-40℃~+85℃ 2 2 250Kbps 300uA 3V~5.5V Short-Circuit Protection Transceiver Yes ±15kV SOIC-16 RS232 ICs ROHSTexas InstrumentsRS232 ICs
24LC08B/P
PDIP-8-40℃~+125℃ 1,000,000 cycles 2.5V~5.5V 200 Years 400kHz 5ms 8Kbit Hardware write protection function、Noise suppression function I2C PDIP-8 EEPROM ROHSMicrochip TechnologyEEPROM
HCPL0637
SOIC-8-40℃~+85℃ 10Mbps 2 3.75kV 4.5V~5.5V 5kV/us DC SOIC-8 Logic Output Optoisolators ROHSonsemiLogic Output Optoisolators
HE721C0500
DIP,7.2x19.1mm-40℃~+85℃ 175V@DC 19.05mm 250mA 3ms 3ms 5.5mm 5V 5W 7.22mm 8 Non-Polarized - Single Coil One set of changeover: 1C (SPDT-changeover) DIP,7.2x19.1mm Reed Relays ROHSLittelfuseReed Relays
Parts
59| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 10µ | Capacitor_SMD:C_0603_1608Metric | C201, C202, C203, C204, C302 |
| 4 | GS3 | Connectors:GS3 | J203, J204, J205, J206 |
| 4 | MOUNT | MountingHole:MountingHole_2.7mm_M2.5_Pad | J104, J105, J106, J107 |
| 2 | 0 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R601, R602 |
| 2 | 100 | Resistor_SMD:R_0603_1608Metric | R301, R402 |
| 2 | 100n | Capacitor_SMD:C_0603_1608Metric | C303, C601 |
| 2 | 60.4 | Resistor_SMD:R_1210_3225Metric | R302, R303 |
| 2 | GPIO CON3 | Connector_PinSocket_2.54mm:PinSocket_2x13_P2.54mm_Vertical | J103, J801 |
| 2 | GPIO J12 | Connector_PinSocket_2.54mm:PinSocket_2x04_P2.54mm_Vertical | J101, J802 |
| 2 | GPIO J13 | Connector_PinSocket_2.54mm:PinSocket_2x01_P2.54mm_Vertical | J102, J803 |
| 2 | R | Resistor_SMD:R_0603_1608Metric | R501, R502 |
| 1 | 1k | Resistor_SMD:R_0603_1608Metric | R603 |
| 1 | 200 | Resistor_SMD:R_0603_1608Metric | R401 |
| 1 | 24LC08 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U501 |
| 1 | 4n7 | Capacitor_SMD:C_0603_1608Metric | C301 |
| 1 | 5V PWR | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J607 |
| 1 | AC IN | Connector_Phoenix_MSTB:PhoenixContact_MSTB_2,5_3-GF_1x03_P5.00mm_Horizontal_ThreadedFlange | J601 |
| 1 | AC OUT | Connector_Phoenix_misc:PhoenixContact_IC_2,5_3-G-5,08_03_P5.08mm_Horizontal | J610 |
| 1 | ASR05-DA | ASR-PCB:ASRxx-xx-PCB | K602 |
| 1 | ATECC608A | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U502 |
| 1 | CAN | Connector_Dsub:DSUB-9_Male_Horizontal_P2.77x2.84mm_EdgePinOffset4.94mm_Housed_MountingHolesOffset7.48mm | J303 |
| 1 | CAN | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MPT-0,5-3-2.54_1x03_P2.54mm_Horizontal | J302 |
| 1 | CAN-GND | Connector_PinHeader_2.54mm:PinHeader_2x02_P2.54mm_Vertical | J304 |
| 1 | EXT SW | Connector_Phoenix_misc:PhoenixContact_MKKDSN_1,5_3-GF-5,08_2x03_P5.08mm_Horizontal | J609 |
| 1 | Fuse | littelfuse_370:fuse_littelfuse_370 | F801 |
| 1 | Fuse | Fuse:Fuseholder_TR5_Littlefuse_No560_No460 | F601 |
| 1 | GPO | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MPT-0,5-4-2.54_1x04_P2.54mm_Horizontal | J401 |
| 1 | HCPL063 | Package_DIP:DIP-8_W7.62mm | U401 |
| 1 | HE721C0500 | he700:HE700 | K601 |
| 1 | IRLHS2242 | PQFN:PQFN-6-2EP_2x2mm_Pitch0.65mm | Q601 |
| 1 | IRM-20 | Meanwell:IRM-20 | U601 |
| 1 | I²C | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J501 |
| 1 | LTC2875-S8 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U301 |
| 1 | MAX3232 | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U201 |
| 1 | PE | Wire_Pads:SolderWirePad_single_2-5mmDrill | J611 |
| 1 | PWR SWITCH | AC-wire:ACWirePad_2x_1-5mmDrill | J602 |
| 1 | Relais | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP601 |
| 1 | SPI | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J502 |
| 1 | TERM | Connector_PinHeader_2.54mm:PinHeader_2x02_P2.54mm_Vertical | J301 |
| 1 | console | Connector_Dsub:DSUB-9_Female_Vertical_P2.77x2.84mm_MountingHoles | J201 |
| 1 | serial | Connector_RJ:RJ45_Amphenol_54602-x08_Horizontal | J202 |
Questions
How big is the Bpi r1-can ser PCB?
It measures 147.8 × 100 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Bpi r1-can ser use?
59 parts, built around the MAX3232ID, 24LC08B/P, HCPL0637 and HE721C0500. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Bpi r1-can ser KiCad files?
From the ci-rt/testbox-shield repository on GitHub, at the commit this page was made from: the board is bpi-r1-can-ser.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Bpi r1-can ser design in my own project?
Its repository states no licence, so its author keeps all rights: ask ci-rt before reusing the design.
Similar boards
- 4 layers87.3 × 56.7 mm
CM4ClusterHat
will127534/Miniature-CM4-Cluster
A dense cluster for four Raspberry Pi Compute Module 4
240 parts96MIT - 4 layers254.9 × 150.1 mm
- 2 layers114.3 × 40.6 mm
KSGER Controller REV 2.0
omega9380/KSGER-Coverplates
T12 Soldering Iron control board. A design based on schematics created by Mindstorm88 on the EEVBlog forums.
54 parts5 - 4 layers101.6 × 147.3 mm
- 4 layers70 × 69.8 mm
- 4 layers59 × 31 mm
- 4 layers175.3 × 96.5 mm
