4 layers164 × 118 mm
OpenEFI rev4 bkp
Churrosoft/OpenEFI-PCB
Coleccion de PCB y planos recomendados para montar una OpenEFI
345 parts8CERN-OHL-S-2.0
4 layers148.6 × 149.9 mm
Rev1 KiCad
Churrosoft/OpenEFI-PCB8Coleccion de PCB y planos recomendados para montar una OpenEFI
- Size
- 148.6 × 149.9 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 149
- Nets
- 210
- Pads
- 507
- Tracks, vias
- 572, 13
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 16 Apr 2019
- Updated
- 7 Apr 2024
Overview
Rev1 KiCad is an open-source printed circuit board by Churrosoft, from the Churrosoft/OpenEFI-PCB repository on GitHub, published under the CERN-OHL-S-2.0 licence. It is a 4-layer board of 148.6 × 149.9 mm with 149 parts on 210 nets, routed with 572 tracks and 13 vias.
It is built around the LM358D, BC548 and BC558, with the BD139 and IRLZ44N among its other parts. Its parts include 51 resistors, 30 diodes, 21 capacitors, 19 transistors and 6 ICs. It belongs with the STM32 boards of this library.
Main components
5
LM358D
SOIC-8-16V~16V 0℃~+70℃ 2 3V~32V 40mA 45nA 5nA 700uA 70dB 7mV 7uV/℃ Built-in compensation、ESD protection SOIC-8 Operational Amplifier ROHSonsemiOperational Amplifier
BC548
TO-92TO-92 Bipolar (BJT) ROHSDDFBipolar (BJT)BC558
TO-921 PNP 100mA 100nA 150MHz 30V 500mW 5V 800 90mV、250mV PNP TO-92 Bipolar (BJT) ROHSDDFBipolar (BJT)
BD139
TO-126-65℃~+150℃ 1 NPN 1.5A 10uA 12.5W 500mV 5V 63 80V NPN TO-126 Bipolar (BJT) ROHSSTMicroelectronicsBipolar (BJT)
IRLZ44N
TO-22055V 47A N-Channel HEXFET® Power MOSFETInfineon TechnologiesUncategorised
README
README.mdOpenEFI-PCB
Coleccion de PCB y planos recomendados para montar una OpenEFI
Sobre el proyecto
OpenEFI es un ECU/EFI programable basada en arduino, totalmente OpenSource, fue creada originalmente para reemplazar una ecu existente en un motor naftero, pero tambien se puede usar para agregar inyeccion y/o encendido electronico a un motor antiguo, cuenta tambien con soporte para DTC's y autodiagnostico
- OpenEFI [Repo principal con todo el codigo]
- OpenEFI-Tuner [Utilidad para revisar el estado de la ecu y modificarla]
Placas soportadas
- STM32F407xxxx: uEFI (v2/v3)
- STM32F103c8t6: OpenEFI (v0.5/v1/v2)
coautores externos:
Dibujos: Lucacik / ig: https://www.instagram.com/luca.cik/
si quieres usar otra placa basada en Arduino (Uno, Mega,DUE,etc), puedes hacerlo, pero los pcb no te serviran y capaz tengas que modificar ligeramente el codigo y el mapeo de los pines, proximamente agregare mas pcb ademas de mejorar los existentes
This source is distributed WITHOUT ANY EXPRESS OR IMPLIED WARRANTY, INCLUDING OF MERCHANTABILITY, SATISFACTORY QUALITY AND FITNESS FOR A PARTICULAR PURPOSE.
Please see LICENSE file for applicable conditions.
Parts
149| Qty | Value | Footprint | References |
|---|---|---|---|
| 16 | 1k | v2:0204_5 | R1, R4, R5, R6, R7, R8, R9, R22, R23, R24, R25, R26, R27, R29, R48, R49 |
| 16 | R-US_0204_5 | v2:0204_5 | R30, R31, R32, R33, R34, R35, R36, R37, R38, R39, R40, R41, R42, R43, R44, R45 |
| 12 | R_Small | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R10, R11, R12, R13, R14, R15, R16, R17, R18, R19, R20, R21 |
| 10 | 5.1v | v2:ZDIO-5 | D4, D5, D18, D19, D20, D21, D22, D23, D24, D25 |
| 8 | 0.001uF | v2:C025-025X050 | C2, C3, C4, C8, C9, C10, C14, C15 |
| 8 | C-EU025-025X050 | v2:C025-025X050 | C5, C6, C7, C11, C12, C13, C16, C17 |
| 7 | BC548 | v2:TO92-EBC | Q1, Q2, Q4, Q6, Q8, Q10, Q12 |
| 6 | 1N4446 | v2:DO35-10 | D12, D13, D14, D15, D16, D17 |
| 6 | BC558 | v2:TO92-EBC | Q3, Q5, Q7, Q9, Q11, Q13 |
| 6 | BD139 | v2:TO126AV | Q14, Q15, Q16, Q17, Q18, Q19 |
| 6 | BZY97 | v2:F126Z12 | D6, D7, D8, D9, D10, D11 |
| 6 | IRLZ44N | Package_TO_SOT_THT:TO-220-3_Horizontal_TabUp | QP1, QP2, QP3, QP4, QP5, QP6 |
| 5 | LED3MM | v2:LED3MM | LED1, LED2, LED3, LED4, LED5 |
| 3 | 1N4148DO35-7 | v2:DO35-7 | D1, D2, D3 |
| 3 | 2k | v2:0204_5 | R28, R46, R47 |
| 2 | 0.001uf | v2:C025-025X050 | C18, C19 |
| 2 | 0.22uf | v2:C025-025X050 | C20, C21 |
| 2 | 1.5k | v2:0204_5 | R50, R51 |
| 2 | 1053141206 | v2:MOLEX_1053141206 | J1, J2 |
| 2 | 74595D | v2:SO16 | IC3, IC4 |
| 2 | F15HP | v2:F15HP | X2, X3 |
| 2 | LM358D | v2:SO08 | IC5, IC6 |
| 2 | MA03-1 | v2:MA03-1 | SV3, SV4 |
| 2 | MA04-1 | v2:MA04-1 | DISPLAY1, PROG1 |
| 1 | 0.1uf | v2:C025-025X050 | C1 |
| 1 | 15k | v2:0204_5 | R2 |
| 1 | 24SN | v2:SO-08 | IC1 |
| 1 | 39-30-?04? | v2:39-30-?04? | P1 |
| 1 | 39-30-?06? | v2:39-30-?06? | P2 |
| 1 | 4067D | v2:SO24W | IC2 |
| 1 | 5k | v2:0204_5 | R3 |
| 1 | FE08-1 | v2:FE08 | SV2 |
| 1 | MA07-1 | v2:MA07-1 | SV1 |
| 1 | MINI-USB_4P-85-32004-10X | v2:85-32004-10X | X1 |
| 1 | SJW | v2:SJW | SJ1 |
| 1 | STM32F103C8T6-MODULE | v2:STM32F103C8T6-MODULE | U$1 |
| 1 | TE5 | v2:TE5 | F1 |
Questions
How big is the Rev1 KiCad PCB?
It measures 148.6 × 149.9 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Rev1 KiCad use?
149 parts, built around the LM358D, BC548, BC558 and BD139. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Rev1 KiCad KiCad files?
From the Churrosoft/OpenEFI-PCB repository on GitHub, at the commit this page was made from: the board is __old/rev1 KiCad/v2.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Rev1 KiCad design in my own project?
Its repository publishes it under the CERN-OHL-S-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
More from Churrosoft/OpenEFI-PCB
6- 4 layers159.6 × 99.6 mm
STM32F rev3
Churrosoft/OpenEFI-PCB
Coleccion de PCB y planos recomendados para montar una OpenEFI
344 parts8CERN-OHL-S-2.0 - 4 layers99 × 113 mm
UEFI rev3
Churrosoft/OpenEFI-PCB
Coleccion de PCB y planos recomendados para montar una OpenEFI
267 parts8CERN-OHL-S-2.0 - 4 layers99.9 × 99.3 mm
ΜEFI rev2
Churrosoft/OpenEFI-PCB
Coleccion de PCB y planos recomendados para montar una OpenEFI
169 parts8CERN-OHL-S-2.0 - 2 layers17.1 × 14.9 mm
Sensors V1
Churrosoft/OpenEFI-PCB
Coleccion de PCB y planos recomendados para montar una OpenEFI
13 parts8CERN-OHL-S-2.0 - 2 layers15 × 11 mm
Sensors V2
Churrosoft/OpenEFI-PCB
Coleccion de PCB y planos recomendados para montar una OpenEFI
12 parts8CERN-OHL-S-2.0
Similar boards
- 2 layers84.8 × 76.3 mm
LabPS
loowiz/EDA_LabPS
This is a power supply project based on the chinese DIY kit "0-30V 2mA-3A Adjustable DC Regulated Power Supply".
57 parts1GPL-3.0 - 2 layers50 × 100 mm
- 2 layers150 × 100 mm
- 4 layers99.6 × 99.8 mm
- 2 layers239.6 × 239.9 mm
- 2 layers98 × 135 mm
- 2 layers242.5 × 102.5 mm
- 2 layers100 × 100 mm
