Skip to the content
2 layers123.2 × 58 mmZVS circut project, the printed circuit board in 3D

ZVS circut project

ChromiumOS-Guy/ZVS-Driver

A ZVS Driver (1-Layer) PCB I Designed so I can use a PCB instead of making a mess of wires

Full screenGitHub.kicad_pcb
Size
123.2 × 58 mm
Copper layers
2
Thickness
1.83 mm
Parts
17
Nets
7
Pads
36
Tracks, vias
77, 0
Routed
Yes
KiCad
KiCad 7 (file 20221018)
Created
22 Mar 2024
Updated
22 Mar 2024

Overview

ZVS circut project is an open-source printed circuit board by ChromiumOS-Guy, from the ChromiumOS-Guy/ZVS-Driver repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 123.2 × 58 mm with 17 parts on 7 nets, routed with 77 tracks and 0 vias.

It is built around the IRFP260NPBF, 1N5246B and CF14JT10K0, with the HCTI-100-7.0, PR02000204700JR500 and B32654A6105K000 among its other parts. Its parts include 5 resistors, 2 ICs, 2 diodes, 2 connectors and 2 inductors.

Main components

7

README

README.md

ZVS-Driver

A ZVS Driver (1-Layer) PCB I Designed so I can use a PCB instead of making a mess of wires

Part List:

Part .NoBuy Link
691137710002https://www.digikey.co.il/en/products/detail/w%C3%BCrth-elektronik/691137710002/6644051
B32654A6105K000https://www.digikey.co.il/en/products/detail/epcos-tdk-electronics/B32654A6105K000/2269405
PR02000204700JR500https://www.digikey.co.il/en/products/detail/vishay-beyschlag-draloric-bc-components/PR02000204700JR500/596196
CF14JT10K0https://www.digikey.co.il/en/products/detail/stackpole-electronics-inc/CF14JT10K0/1741265
CF14JT1K00https://www.digikey.co.il/en/products/detail/stackpole-electronics-inc/CF14JT1K00/1741314
HLMP-3601https://www.digikey.co.il/en/products/detail/broadcom-limited/HLMP-3601/637604
1N5246Bhttps://www.digikey.co.il/en/products/detail/onsemi/1N5246B/977606
HCTI-100-7.0https://www.digikey.co.il/en/products/detail/signal-transformer/HCTI-100-7-0/7362979
IRFP260NPBFhttps://www.digikey.co.il/he/products/detail/infineon-technologies/IRFP260NPBF/811623?s=N4IgTCBcDaIJICUBiAFMA2ADAORAXQF8g

Parts

17
QtyValueFootprintReferences
21N4148Diode_THT:D_DO-35_SOD27_P7.62mm_HorizontalD3, D4
21N5246B1N5246B:AFL-W2C8.9DCR1, CR2
2691137710002691137710002:CONN2_710002_WREJ1, J2
2CF14JT10K0CF14JT1K00:STA_CF14_STPR1, R2
2HCTI-100-7.0HCTI-100-7.0:IND_HCTI-68-7.7L1, L2
2IRFP260NPBFIRFP260NPBF-foorprint:PG-TO247-3-46_INFU1, U2
2PR02000204700JR500PR02000204700JR500:PR02_VISR3, R5
1B32654A6105K000B32654A6105K000:CAP_B32654A-27.5-13.5x23x31.5_TDKC1
1CF14JT1K00CF14JT1K00:STA_CF14_STPR6
1HLMP-3601HLMP-3601:HMLP_1&slash_3_AVACR3

Similar boards

  • 2 layers189 × 114.5 mmInduction Heater PCB, the printed circuit board in 3D

    Induction Heater PCB

    FarhanKashif/ZVS-Induction-Heater

    400W DIY Inductor Heater

    34 parts1
  • 2 layers70 × 66 mmParvus amp, the printed circuit board in 3D

    Parvus amp

    nradulovic/hw_parvus

    TDA7293 based audio power amplifier

    50 parts3GPL-3.0
  • 2 layers90 × 90 mmPlasmaTransformer, the printed circuit board in 3D

    PlasmaTransformer

    inceptionev/PlasmaTransformer

    This project mainly focuses on creating a driver and 3D-printed support structure that allows for safe continuous operation of a plasma toroid.

    86 parts14
  • 2 layers115 × 85.1 mmELV1 revision, the printed circuit board in 3D

    ELV1 revision

    omerikinci/ELV1

    Elektronik kör yük (electronic dummy load) cihazının ilk stabil versiyonu. 150 W ile sınırlandırılmış, 30 V / 10 A aralığını destekler.

    228 parts
  • 2 layersBoost converter1, the printed circuit board in 3D

    Boost converter1

    ihsan-sa/High-Power-DC-DC-Converter

    A DC-DC converter for high-power (>750W) adjustable output.

    7 parts
  • 2 layers76.2 × 83.8 mmNeotron Expansion Template, the printed circuit board in 3D

    Neotron Expansion Template

    Neotron-Compute/Neotron-Expansion-Template

    Example Neotron Expansion card

    28 parts1
  • 2 layers281.6 × 255.2 mmSynthia, the printed circuit board in 3D

    Synthia

    Engineering-House/Project-Synthia

    The programs used are as follows: - STMCube32MX - Visual Studio Code - STM32CubeIDE for Visual Studio Code (Extension Pack)

    236 parts
  • 2 layers127 × 69.9 mmEzcgi, the printed circuit board in 3D

    Ezcgi

    baldengineer/bit-preserve

    Project for capturing vintage, classic, aka old computer schematics in KiCad.

    34 parts446

Questions

How big is the ZVS circut project PCB?

It measures 123.2 × 58 mm and has 2 copper layers, 1.83 mm thick.

What parts does the ZVS circut project use?

17 parts, built around the IRFP260NPBF, 1N5246B, CF14JT10K0 and HCTI-100-7.0. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the ZVS circut project KiCad files?

From the ChromiumOS-Guy/ZVS-Driver repository on GitHub, at the commit this page was made from: the board is ZVS-circut-project.kicad_pcb and its schematic ZVS-circut-project.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the ZVS circut project design in my own project?

Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).