Skip to the content
2 layersCameraTriggerSensorNodeOnly, the printed circuit board in 3D

CameraTriggerSensorNodeOnly

chrocket/RocketTrig3

A camera controller for photographing high poweed model rockets

Copper layers
2
Thickness
1.6 mm
Parts
60
Nets
83
Pads
235
Tracks, vias
863, 74
Pours
1
Routed
Yes
KiCad
KiCad 7 (file 20221018)
Created
31 Jul 2022
Updated
13 Jan 2025

Overview

CameraTriggerSensorNodeOnly is an open-source printed circuit board by chrocket, from the chrocket/RocketTrig repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board with 60 parts on 83 nets, routed with 863 tracks and 74 vias.

It is built around the AMS1117CD-5.0, TLP291-4 and ULN2803A, with the 2SC1815, MMBT3904 and B330A-13-F-MS among its other parts. Its parts include 15 resistors, 13 connectors, 6 diodes, 5 ICs and 4 capacitors.

Main components

6

README

README.md

RocketTrig

A camera controller for photographing high poweed model rockets IMG_1968

This is a camera controller. Each "node" contains outputs to control one or two cameras. Camera nodes can communicate to each others over an RF link. Two nodes make up a system, say one at the flight line and one up close to the rocket. Liftoffs can be triggered by a variety of sensors to detect lift-off, or manually via a foot switch.

Schematic, BOM, JLBPCB files and firmware are all included. Note: Even those some files are labelled "CameraTriggerSensorNodeOnly" they are really Camera nodes.

This is based on the Adafruit Feather M0 LoRa board (Adafruit 3178). It also works with RFM65 radio version of that board, cheaper but less range (Adafruit 3176). There is a #define to select between the two, and the frequency of operation will have to be in the range of the chip.

To build firmware, you will need Arduino IDE. I'm using ver 1.8.19. You will need to set up the Adafruit boards in the boards manager (Add https://adafruit.github.io/arduino-board-index/package_adafruit_index.json to Additional boards URL under Preferences). Set "Adafruit Feather M0 (SAMD21)" Under Tools/Board.

I'm using dependencies (under library manager): CRC32 by Christopher Baker https://github.com/bakercp/CRC32/blob/master/examples/CRC32/CRC32.ino Requires RadioHead libs // https://www.airspayce.com/mikem/arduino/RadioHead/index.html // Download from Adafruit https://cdn-learn.adafruit.com/assets/assets/000/035/106/original/RadioHead-1.62.zip?1472068723 CCW MorseTX https://github.com/ridencww/cww_MorseTx

You will likely want to change the default 915.35 MHz operating frequency. This is done by a #define. This will deconfict different users who might want to simultaneously use the sytem.


In June 2023, I had Eureka moment. I realized that with virtuallly no changes, the RocketTrig board could be used as a wireless Launch controller and still trigger cameras. I modified the program to work with this and later worked up a separate board "Rev 4_1" that could better meet both remote launch and remote camera trigger functions.

(Remote launch can still trigger cameras both local and remote)

Here is the Rev 4_1 board New_Rev4_1_based_desgin/0b8079aaf5414c29a16c643ac7a76c68.png

Parts

60
QtyValueFootprintReferences
71KResistor_SMD:R_0603_1608MetricR2, R3, R4, R5, R7, R14, R15
4 MountingHole:MountingHole_3.7mm_PadH1, H2, H3, H4
20Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolderR9, R10
20.01 μFCapacitor_SMD:C_0402_1005MetricC3, C4
210KResistor_SMD:R_0603_1608MetricR11, R12
22SC1815Package_TO_SOT_SMD:SOT-23Q1, Q4
251Resistor_SMD:R_0603_1608MetricR6, R8
2750Resistor_SMD:R_0603_1608MetricR1, R13
2MMBT3904Package_TO_SOT_SMD:SOT-23Q2, Q3
2Screw_Terminal_01x02TerminalBlock_TE-Connectivity:TerminalBlock_TE_282834-2_1x02_P2.54mm_HorizontalJ12, J13
1 Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mmJP1
1+12TestPoint:TestPoint_Keystone_5000-5004_MiniatureTP4_12
1+3.3VTestPoint:TestPoint_Keystone_5000-5004_MiniatureTP3_3_3
1+5VTestPoint:TestPoint_Keystone_5010-5014_MultipurposeTP1+1
1+5VTestPoint:TestPoint_Keystone_5000-5004_MiniatureTP2_5
11ufCapacitor_SMD:CP_Elec_4x5.4C1
125ufCapacitor_SMD:C_Elec_4x5.4C2
131783178IC1
1AMS1117CD-5.0Package_TO_SOT_SMD:SOT-223U1
1B330A-13-FDiode_SMD:D_SMAD3
1BuzzerBuzzer_Beeper:Buzzer_TDK_PS1240P02BT_D12.2mm_H6.5mmBZ1
1Camera 1 3.5mmConnector_Audio:Jack_3.5mm_CUI_SJ1-3533NG_Horizontal_CircularHolesJ2
1Camera 1 TermTerminalBlock_TE-Connectivity:TerminalBlock_TE_282834-3_1x03_P2.54mm_HorizontalJ4
1Camera 2 TermTerminalBlock_TE-Connectivity:TerminalBlock_TE_282834-3_1x03_P2.54mm_HorizontalJ5
1Camera 2 3.5 mmConnector_Audio:Jack_3.5mm_CUI_SJ1-3533NG_Horizontal_CircularHolesJ3
1FireTestPoint:TestPoint_Keystone_5010-5014_MultipurposeTP4Fire1
1GNDTestPoint:TestPoint_Keystone_5000-5004_MiniatureTP1_GND1
1GndTestPoint:TestPoint_Keystone_5000-5004_MiniatureTP5
1InCameraTriggerPCB:TB00750812BEJ7
1LEDLED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolderD6
1LED FocusLED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolderD5
1LED TrigLED_SMD:LED_0805_2012Metric_CastellatedD4
1LED TrigLED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolderD1
1MCP23017T-E/SOPackage_SO:SOIC-28W_7.5x17.9mm_P1.27mmU4
1MiscConnector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_VerticalJ9
1OutCameraTriggerPCB:TB00750812BEJ8
1PWRLED_SMD:LED_0603_1608MetricD2
1Pwr switchCameraTriggerPCB:CUI_TB007-508-02BEJ1
1SWConnector_AMASS:AMASS_XT30U-F_1x02_P5.0mm_VerticalJ10
1TLP291-4Package_SO:SOIC-16_4.55x10.3mm_P1.27mmU2
1ULN2803ACameraTriggerPCB:SOIC127P1030X265-18NU5
1pwrCameraTriggerPCB:CUI_TB007-508-02BEJ11
1qwiicConnector_JST:JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_HorizontalJ6

More from chrocket/RocketTrig

4
  • 2 layers98.8 × 69.9 mmCameraTriggerSensorNodeOnly, the printed circuit board in 3D

    CameraTriggerSensorNodeOnly

    chrocket/RocketTrig

    A camera controller for photographing high poweed model rockets

    65 parts3GPL-3.0
  • 2 layersCameraTriggerSensorNodeOnly, the printed circuit board in 3D

    CameraTriggerSensorNodeOnly

    chrocket/RocketTrig

    A camera controller for photographing high poweed model rockets

    61 parts3GPL-3.0
  • 2 layers89 × 63 mmCameraTriggerSensorNodeOnly, the printed circuit board in 3D

    CameraTriggerSensorNodeOnly

    chrocket/RocketTrig

    A camera controller for photographing high poweed model rockets

    50 parts3GPL-3.0
  • 2 layers75.2 × 99.7 mm4ChWirelessLaunchController, the printed circuit board in 3D

    4ChWirelessLaunchController

    chrocket/RocketTrig

    A camera controller for photographing high poweed model rockets

    25 parts3GPL-3.0

Similar boards

  • 2 layers92 × 94.5 mmPicoCNC, the printed circuit board in 3D

    PicoCNC

    phil-barrett/PicoCNC

    Raspberry Pi Pico based grblHAL Controller

    152 parts173
  • 4 layers99.8 × 94.6 mmOresat batteries, the printed circuit board in 3D

    Oresat batteries

    oresat/oresat-batteries

    Battery board for OreSat

    354 parts29
  • 4 layers165.4 × 105.7 mmEcdl laser bboard, the printed circuit board in 3D

    Ecdl laser bboard

    mahdi-kh1265/780nm-ecdl-electronics

    Control, interface, piezo-actuation, and power electronics for POSM's 780 nm Littrow external-cavity diode laser.

    204 partsMIT
  • 2 layers40 × 60 mmSTM8003f3p development board, the printed circuit board in 3D

    STM8003f3p development board

    niksrajendra/stm8-bootloader-extended

    STM8 bootloader designed to work with any available communication interface and configure for different feature like secure, unsecure bootloader.

    131 parts
  • 2 layers71.8 × 24.9 mmPowerBoard, the printed circuit board in 3D

    PowerBoard

    quezadaminter/CR101kc

    The electrical schematics and PCB layout for the CR101 boards.

    23 partsMIT
  • 2 layers285 × 174.6 mmMegaController, the printed circuit board in 3D

    MegaController

    prasad73/foodkiosk

    food kiosk for restaurants/food retail chains

    120 parts
  • 4 layers116 × 86.4 mmHighpower controller, the printed circuit board in 3D

    Highpower controller

    pypilot/pypilot_schematics

    kicad schematics for pypilot components

    168 parts3

Questions

What parts does the CameraTriggerSensorNodeOnly use?

60 parts, built around the AMS1117CD-5.0, TLP291-4, ULN2803A and 2SC1815. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the CameraTriggerSensorNodeOnly KiCad files?

From the chrocket/RocketTrig repository on GitHub, at the commit this page was made from: the board is RemoteLaunch_Controller/CameraTriggerRev 4_2 w Launch Controller 2023/CameraTriggerSensorNodeOnly.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the CameraTriggerSensorNodeOnly design in my own project?

Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).