

Lora node esp32
ESP32 Lorawan beehive connected
- Size
- 48.3 × 88.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 25
- Nets
- 48
- Pads
- 117
- Tracks, vias
- 319, 13
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 17 Jan 2020
- Updated
- 22 Mar 2021
Overview
Lora node esp32 is an open-source printed circuit board by Christophe45, from the Christophe45/ESP32-Lorawan repository on GitHub. It is a 2-layer board of 48.3 × 88.9 mm with 25 parts on 48 nets, routed with 319 tracks and 13 vias.
It is built around the ESP32-WROOM-32, RFM95W and TP4056, with the BC337 among its other parts. Its parts include 6 connectors, 5 resistors, 4 capacitors, 4 ICs and 2 switches. It belongs with the radio and wireless boards and the ESP32 boards of this library.
Main components
4ESP32-WROOM-32
SMD,18x25.5mm-40℃~+85℃ -98dBm 2.4GHz 2.7V~3.6V 20dBm Bluetooth4.2 ESP32-DOWDQ6 UART、SDIO、SPI、I2C、GPIO、PWM、ADC、DAC SMD,25.5x18mm WiFi Modules ROHSEspressif SystemsWiFi ModulesRFM95W
SMD-16PUncategorisedHopeRF Micro-electronicsTP4056
ESOP-8-40℃~+85℃ 1 1A 35uA 4.2V 4V~6.5V Charging IC Lithium Battery Support Support 恒流充电、恒压充电、涓流充电、自动再充电、充电终止、可编程充电电流、软启动、欠压锁定 ESOP-8 Battery Management ROHSUMWBattery ManagementBC337
TO-92-31 NPN 100 100MHz 100nA 45V 5V 625mW 700mV 800mA NPN TO-92-3 Bipolar (BJT) ROHSFoshan Blue Rocket ElecBipolar (BJT)
README
README.mdESP32-Lorawan
ESP32 Lorawan beehive connected
This project is to make a connected hive that can control the weight, the internal and external temperature of the hive as well as the humidity. Data recovery is done with a Lora RFM95 module and reception of this data through a gateway connected to TTN. The data received on TTN is then sent to Node-red and sent back to Blynk's servers.
The schematic of the Lorawan is:
PCB 3D :

New version on test with a GPS module NOE6NV2 and an accelerometer MPU6050 used for alarm detection when the hive is moved.
schematic:
PCB 3D :


Parts
25| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | MountingHole | MountingHole:MountingHole_2.2mm_M2 | H1, H2, H3 |
| 2 | 10K | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P15.24mm_Horizontal | R1, R3 |
| 2 | 10µF | Capacitor_THT:CP_Axial_L10.0mm_D4.5mm_P15.00mm_Horizontal | C1, C2 |
| 1 | 100nF | Capacitor_SMD:C_1206_3216Metric_Pad1.42x1.75mm_HandSolder | C3 |
| 1 | 10uF | Capacitor_SMD:C_1206_3216Metric_Pad1.42x1.75mm_HandSolder | C4 |
| 1 | 1M | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P15.24mm_Horizontal | R4 |
| 1 | 2,2K | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P15.24mm_Horizontal | R2 |
| 1 | 3M | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P15.24mm_Horizontal | R5 |
| 1 | BC337 | Package_TO_SOT_THT:TO-92_Inline | Q1 |
| 1 | BME280 sensor | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J3 |
| 1 | Battery | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | J5 |
| 1 | Conn_Coaxial_Power | Connector_Coaxial:SMA_Samtec_SMA-J-P-H-ST-EM1_EdgeMount | J1 |
| 1 | ESP32-WROOM-32 | RF_Module:ESP32-WROOM-32 | U1 |
| 1 | Load sensor 200kg | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J6 |
| 1 | MCP1700-3302E_TO92 | Package_TO_SOT_THT:TO-92_Inline | U3 |
| 1 | PROG | Button_Switch_THT:SW_Tactile_Straight_KSA0Axx1LFTR | SW2 |
| 1 | Prog | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J2 |
| 1 | RESET | Button_Switch_THT:SW_Tactile_Straight_KSA0Axx1LFTR | SW1 |
| 1 | RFM95W | RF_Module:HOPERF_RFM9XW_SMD | U2 |
| 1 | TP4056 | TP4056:4056E_LiIon_loader_SMT | U4 |
| 1 | solar connector | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | J4 |
More from Christophe45/ESP32-Lorawan
3- 2 layers71.1 × 109.2 mm

- 2 layers54.6 × 94 mm

- 2 layers53.3 × 101.6 mm

Similar boards
- 2 layers159 × 140.1 mm

Phazor
skrmsh/skirmish-hardware
Skirmish Hardware © 2022-2023 by Ole Lange is licensed under CC BY-NC-SA 4.0. To view a copy of this license, visit http://creativecommons.org/licenses/by-nc-sa/4.0/
123 parts10 - 2 layers251.5 × 142.8 mm

Prueba 1 E.A.S
impatrq/aeroalert
Aeroalert es un prototipo de sistema de emergencia para aeronaves basado en el monitoreo constante de parámetros de salud de los pilotos para prevenir accidentes aeronauticos.
45 parts3 - 2 layers86 × 65 mm

- 2 layers111 × 91.4 mm

- 4 layers241.5 × 203 mm

- 2 layers118.4 × 111.3 mm

Home Automation
vishalsaravanan-k/home-automation-using-esp32-and-relay
This project is a basic home automation system built using an ESP32, capable of turning appliances ON/OFF through both mobile app (via Wi-Fi) and an IR remote.
92 parts - 2 layers50 × 50 mm

PcbAlarma
brengi/CESE-PCB
Curso de Diseño de Circuitos Impresos de la Carrera de Especialización en Sistemas Embebidos
25 parts7 - 2 layers

Questions
How big is the Lora node esp32 PCB?
It measures 48.3 × 88.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Lora node esp32 use?
25 parts, built around the ESP32-WROOM-32, RFM95W, TP4056 and BC337. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Lora node esp32 KiCad files?
From the Christophe45/ESP32-Lorawan repository on GitHub, at the commit this page was made from: the board is kicad lora node/lora node esp32.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Lora node esp32 design in my own project?
Its repository states no licence, so its author keeps all rights: ask Christophe45 before reusing the design.