

Lora node esp32 smd GPS
ESP32 Lorawan beehive connected
- Size
- 71.1 × 109.2 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 38
- Nets
- 39
- Pads
- 176
- Tracks, vias
- 482, 22
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 17 Jan 2020
- Updated
- 22 Mar 2021
Overview
Lora node esp32 smd GPS is an open-source printed circuit board by Christophe45, from the Christophe45/ESP32-Lorawan repository on GitHub. It is a 2-layer board of 71.1 × 109.2 mm with 38 parts on 39 nets, routed with 482 tracks and 22 vias.
It is built around the ESP32-WROOM-32, HX711 and DS18B20, with the MPU-6050, RFM95W-868S2 and TP4056 among its other parts. Its parts include 11 connectors, 7 resistors, 7 ICs, 4 capacitors and 2 switches. It belongs with the radio and wireless boards and the ESP32 boards of this library.
Main components
7ESP32-WROOM-32
SMD,18x25.5mm-40℃~+85℃ -98dBm 2.4GHz 2.7V~3.6V 20dBm Bluetooth4.2 ESP32-DOWDQ6 UART、SDIO、SPI、I2C、GPIO、PWM、ADC、DAC SMD,25.5x18mm WiFi Modules ROHSEspressif SystemsWiFi ModulesHX711
SOP-16-40℃~+85℃ 1.4mA 10Hz、80Hz 1MHz~20MHz、11.0592MHz 2 2.6V~5.5V 20mV、40mV、80mV 24 Built-in External、Built-in SPI Support Yes SOP-16 Analog to Digital Converters (ADC) ROHSAvia SemiconAnalog To Digital Converters (ADC)DS18B20
TO-92-55℃~+125℃ 12bit 3V~5.5V 750ms Single-bus ±0.4℃ TO-92 Temperature Sensors ROHSUMWTemperature SensorsMPU-6050
QFN-24-EP(4x4)-40℃~+85℃ 16bit 1KB 2.375V~3.46V 5uA Accelerometer Gyroscope I2C X,Y,Z X,Y,Z ±16g ±2000dps QFN-24-EP(4x4) Accelerometers ROHSTDK InvenSenseAccelerometersRFM95W-868S2
16-SMD16-SMD New Arrivals ROHSHopeRF Micro-electronicsUncategorisedTP4056
ESOP-8-40℃~+85℃ 1 1A 35uA 4.2V 4V~6.5V Charging IC Lithium Battery Support Support 恒流充电、恒压充电、涓流充电、自动再充电、充电终止、可编程充电电流、软启动、欠压锁定 ESOP-8 Battery Management ROHSUMWBattery ManagementBC337
TO-92-31 NPN 100 100MHz 100nA 45V 5V 625mW 700mV 800mA NPN TO-92-3 Bipolar (BJT) ROHSFoshan Blue Rocket ElecBipolar (BJT)
README
README.mdESP32-Lorawan
ESP32 Lorawan beehive connected
This project is to make a connected hive that can control the weight, the internal and external temperature of the hive as well as the humidity. Data recovery is done with a Lora RFM95 module and reception of this data through a gateway connected to TTN. The data received on TTN is then sent to Node-red and sent back to Blynk's servers.
The schematic of the Lorawan is:
PCB 3D :

New version on test with a GPS module NOE6NV2 and an accelerometer MPU6050 used for alarm detection when the hive is moved.
schematic:
PCB 3D :


Parts
38| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | MountingHole | MountingHole:MountingHole_2.2mm_M2 | H1, H2, H3, H4, H5, H6 |
| 3 | 10K | Resistor_SMD:R_1206_3216Metric_Pad1.42x1.75mm_HandSolder | R1, R3, R7 |
| 2 | 10µF | Capacitor_SMD:C_Elec_5x5.4 | C1, C2 |
| 1 | 100nF | Capacitor_SMD:C_1206_3216Metric_Pad1.42x1.75mm_HandSolder | C3 |
| 1 | 10uF | Capacitor_SMD:C_1206_3216Metric_Pad1.42x1.75mm_HandSolder | C4 |
| 1 | 1M | Resistor_SMD:R_1206_3216Metric_Pad1.42x1.75mm_HandSolder | R4 |
| 1 | 2,7K | Resistor_SMD:R_1206_3216Metric_Pad1.42x1.75mm_HandSolder | R2 |
| 1 | 3M | Resistor_SMD:R_1206_3216Metric_Pad1.42x1.75mm_HandSolder | R5 |
| 1 | 4.7K | Resistor_SMD:R_1206_3216Metric_Pad1.42x1.75mm_HandSolder | R6 |
| 1 | BC337 | Package_TO_SOT_THT:TO-92 | Q1 |
| 1 | BME280 sensor | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J3 |
| 1 | Battery | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | J5 |
| 1 | Conn_Coaxial_Power | Connector_Coaxial:SMA_Samtec_SMA-J-P-H-ST-EM1_EdgeMount | J1 |
| 1 | DS18B20 | TerminalBlock:TerminalBlock_bornier-4_P5.08mm | J7 |
| 1 | ESP32-WROOM-32 | esp32-wroom:ESP32-WROOM-32 | U1 |
| 1 | GPS NEO6MV2 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J8 |
| 1 | GY-NEO6MV2 | hx711:GY-NEO6 | U7 |
| 1 | HX711 | hx711:HX711 module | U5 |
| 1 | Load weight 200Kg | TerminalBlock:TerminalBlock_bornier-6_P5.08mm | J6 |
| 1 | MCP1700 | Package_TO_SOT_THT:TO-92 | U3 |
| 1 | MPU-6050 | hx711:MPU6050 | U6 |
| 1 | MPU-6050 | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | J9 |
| 1 | PROG | Button_Switch_THT:SW_PUSH_6mm_H5mm | SW2 |
| 1 | Prog | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J2 |
| 1 | RESET | Button_Switch_THT:SW_PUSH_6mm_H5mm | SW1 |
| 1 | RFM95W-868S2 | RF_Module:HOPERF_RFM9XW_SMD | U2 |
| 1 | TP4056 | TP4056:4056E_LiIon_loader_SMT | U4 |
| 1 | alarm button | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | J10 |
| 1 | load weight 2 | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | J11 |
| 1 | solar connector | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | J4 |
More from Christophe45/ESP32-Lorawan
3- 2 layers54.6 × 94 mm

- 2 layers53.3 × 101.6 mm

- 2 layers48.3 × 88.9 mm

Similar boards
- 4 layers82 × 100 mm

Falcon Edge
rmingon/Falcon-Edge
A 3D-printable flying-wing airframe with a custom ESP32 flight computer—open hardware you can solder, screw together, and fly.
48 parts11 - 2 layers40 × 60 mm

- 2 layers159 × 140.1 mm

Phazor
skrmsh/skirmish-hardware
Skirmish Hardware © 2022-2023 by Ole Lange is licensed under CC BY-NC-SA 4.0. To view a copy of this license, visit http://creativecommons.org/licenses/by-nc-sa/4.0/
123 parts10 - 2 layers110 × 90 mm

- 2 layers150 × 40 mm

- 2 layers100.4 × 99.2 mm

Espdroneea
sushrutchhatkuli/Custom-ESP32-drone-PCB
Designed a custom ESP32-WROOM-32–based drone flight controller PCB featuring USB-C charging, regulated 3.3 V power delivery, and onboard IMU sensing using the MPU-6050.
121 parts1 - 2 layers100 × 100 mm

ESP drone
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
130 parts915 - 4 layers90.6 × 58.1 mm

EcoApi pcb
EcoApi/EcoApi_BeeHiveMonitoring
describ options with 0R resistors. etc ...
179 parts4GPL-3.0
Questions
How big is the Lora node esp32 smd GPS PCB?
It measures 71.1 × 109.2 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Lora node esp32 smd GPS use?
38 parts, built around the ESP32-WROOM-32, HX711, DS18B20 and MPU-6050. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Lora node esp32 smd GPS KiCad files?
From the Christophe45/ESP32-Lorawan repository on GitHub, at the commit this page was made from: the board is kicad lora node/lora node esp32 smd GPS.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Lora node esp32 smd GPS design in my own project?
Its repository states no licence, so its author keeps all rights: ask Christophe45 before reusing the design.