Skip to the content
2 layers251.5 × 142.8 mmPrueba 1 E.A.S, the printed circuit board in 3D

Prueba 1 E.A.S

impatrq/aeroalert3

Aeroalert es un prototipo de sistema de emergencia para aeronaves basado en el monitoreo constante de parámetros de salud de los pilotos para prevenir accidentes aeronauticos.

Size
251.5 × 142.8 mm
Copper layers
2
Thickness
1.6 mm
Parts
45
Nets
54
Pads
156
Tracks, vias
271, 8
Pours
2
Routed
Yes
KiCad
KiCad 7 (file 20221018)
Created
28 Apr 2023
Updated
29 Nov 2023

Overview

Prueba 1 E.A.S is an open-source printed circuit board by impatrq, from the impatrq/aeroalert repository on GitHub. It is a 2-layer board of 251.5 × 142.8 mm with 45 parts on 54 nets, routed with 271 tracks and 8 vias.

It is built around the ESP32-WROOM-32 and BC337. Its parts include 21 resistors, 7 switches, 3 diodes, 3 transistors and 2 ICs. It belongs with the ESP32 boards of this library.

Main components

2

README

README.md

AeroAlert

Logo proyecto

¿Qué es AeroAlert?

Aeroalert es un prototipo de sistema de emergencia para aeronaves basado en el monitoreo constante de parámetros de salud de los pilotos para prevenir accidentes aeronauticos. El sistema cuenta con una pulsera dotada de los sensores necesarios. Si se detecta un estado de salud urgente que implique que el piloto este incapaz de controlar la aeronave, se le otorga el control al piloto automático nativo, el cual, a través de dos equipos de procesamiento diseñados por nosotros, entabla una comunicación con la CTRT correspondiente para llevar la aeronave a una situación que permita evitar el riesgo de accidente.

¿Quiénes lo desarrollan?

AeroAlert es un proyecto realizado por alumnos de 7mo Año de la Escuela de Educación Secundaria Técnica N°7 "Taller Regional Quilmes", especialidad Aviónica.

Imagen Grupal

Integrantes

Contactos

Parts

45
QtyValueFootprintReferences
21RResistor_THT:R_Axial_DIN0411_L9.9mm_D3.6mm_P12.70mm_HorizontalR1, R2, R3, R4, R10, R11, R12, R13, R14, R15, R16, R17, R18, R19, R20, R21 +5
3ADW11Relay_THT:Relay_SPDT_SANYOU_SRD_Series_Form_CK1, K2, K3
3BC337Package_TO_SOT_THT:TO-92_InlineQ1, Q2, Q3
3DDiode_THT:D_DO-15_P15.24mm_HorizontalD1, D2, D3
2LOGOMAX30102:logo alt AeroAlertG***, G***
1AlertConnector_Phoenix_MC_HighVoltage:PhoenixContact_MCV_1,5_2-G-5.08_1x02_P5.08mm_VerticalLA1
1ESP32-WROOM-32Library:ESP32 NODEMCUU1
1Entrada 12VMT3608:MT 3608U5
1HDSP-4830_25631bs1:Led Bar DisplayBAR1
1Keylock (On/Off)Connector_Phoenix_MC_HighVoltage:PhoenixContact_MCV_1,5_2-G-5.08_1x02_P5.08mm_VerticalSW3
1ManualConnector_Phoenix_MC_HighVoltage:PhoenixContact_MCV_1,5_2-G-5.08_1x02_P5.08mm_VerticalSW4
1ReactionConnector_Phoenix_MC_HighVoltage:PhoenixContact_MCV_1,5_2-G-5.08_1x02_P5.08mm_VerticalSW1
1TestConnector_Phoenix_MC_HighVoltage:PhoenixContact_MCV_1,5_2-G-5.08_1x02_P5.08mm_VerticalSW2
1Test FailConnector_Phoenix_MC_HighVoltage:PhoenixContact_MCV_1,5_2-G-5.08_1x02_P5.08mm_VerticalLA3
1WarningConnector_Phoenix_MC_HighVoltage:PhoenixContact_MCV_1,5_2-G-5.08_1x02_P5.08mm_VerticalLA2

The 42 most common of 45 parts.

More from impatrq/aeroalert

2
  • 2 layers102.7 × 76.4 mmPrueba 1 R.T.D.C, the printed circuit board in 3D

    Prueba 1 R.T.D.C

    impatrq/aeroalert

    Aeroalert es un prototipo de sistema de emergencia para aeronaves basado en el monitoreo constante de parámetros de salud de los pilotos para prevenir accidentes aeronauticos.

    14 parts3
  • 2 layers51.3 × 41.6 mmPrueba 1 Pulsera, the printed circuit board in 3D

    Prueba 1 Pulsera

    impatrq/aeroalert

    Aeroalert es un prototipo de sistema de emergencia para aeronaves basado en el monitoreo constante de parámetros de salud de los pilotos para prevenir accidentes aeronauticos.

    10 parts3

Similar boards

  • 2 layers71.1 × 109.2 mmLora node esp32 smd GPS, the printed circuit board in 3D

    Lora node esp32 smd GPS

    Christophe45/ESP32-Lorawan

    ESP32 Lorawan beehive connected

    38 parts14
  • 2 layers159 × 140.1 mmPhazor, the printed circuit board in 3D

    Phazor

    skrmsh/skirmish-hardware

    Skirmish Hardware © 2022-2023 by Ole Lange is licensed under CC BY-NC-SA 4.0. To view a copy of this license, visit http://creativecommons.org/licenses/by-nc-sa/4.0/

    123 parts10
  • 2 layers86 × 65 mmESP32, the printed circuit board in 3D

    ESP32

    Freyenn/ESP32-Master-Tesis

    ESP32 PCB- Master Tesis

    51 parts
  • 4 layers241.5 × 203 mmBoard spinning whell, the printed circuit board in 3D

    Board spinning whell

    rubenjpcarvalho92/fortune_spinning_wheel_pcb

    PCB da máquina

    59 parts
  • 2 layers118.4 × 111.3 mmHome Automation, the printed circuit board in 3D

    Home Automation

    vishalsaravanan-k/home-automation-using-esp32-and-relay

    This project is a basic home automation system built using an ESP32, capable of turning appliances ON/OFF through both mobile app (via Wi-Fi) and an IR remote.

    92 parts
  • 2 layers50 × 50 mmPcbAlarma, the printed circuit board in 3D

    PcbAlarma

    brengi/CESE-PCB

    Curso de Diseño de Circuitos Impresos de la Carrera de Especialización en Sistemas Embebidos

    25 parts7

Questions

How big is the Prueba 1 E.A.S PCB?

It measures 251.5 × 142.8 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Prueba 1 E.A.S use?

45 parts, built around the ESP32-WROOM-32 and BC337. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Prueba 1 E.A.S KiCad files?

From the impatrq/aeroalert repository on GitHub, at the commit this page was made from: the board is CAD/AES/Electrical/PCB/Prueba 1 E.A.S.kicad_pcb and its schematic CAD/AES/Electrical/PCB/Prueba 1 E.A.S.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Prueba 1 E.A.S design in my own project?

Its repository states no licence, so its author keeps all rights: ask impatrq before reusing the design.