4 layers70 × 43 mm
USMU v10
joeltroughton/uSMU
Credit card-sized, USB-powered 4 quadrant source-measure unit hardware and firmware
137 parts187
4 layers53 × 41.5 mm
Oven tempsensor esp32c6
chof747/oven-tempsensor-esp32c6- Size
- 53 × 41.5 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 23
- Nets
- 34
- Pads
- 100
- Tracks, vias
- 169, 26
- Pours
- 5
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 13 Sep 2026
- Updated
- 19 Sep 2026
Overview
Oven tempsensor esp32c6 is an open-source printed circuit board by chof747, from the chof747/oven-tempsensor-esp32c6 repository on GitHub, published under the CC0-1.0 licence. It is a 4-layer board of 53 × 41.5 mm with 23 parts on 34 nets, routed with 169 tracks and 26 vias.
It is built around the ADS1115IDGS. Its parts include 9 resistors, 4 connectors, 3 switches, 2 capacitors and 2 ICs. It belongs with the ESP32 and RISC-V boards of this library.
Main components
1README
README.mdoven-tempsensor-esp32c6
Parts
23| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 10k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3, R4, R5, R10, R11 |
| 2 | 100k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2 |
| 2 | 2k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R6, R7 |
| 1 | 0.1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2 |
| 1 | ADS1115IDGS | Package_SO:TSSOP-10_3x3mm_P0.5mm | U2 |
| 1 | Battery | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Horizontal | J1 |
| 1 | C | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1 |
| 1 | LOGO | Chof747 Logos:LOGO small | G*** |
| 1 | Mode | Button_Switch_THT:SW_PUSH_6mm | SW1 |
| 1 | OLED Display | Chof747_Footprints:OLED-TH_L38.0-W12.0_HS91L02W2C01 | J4 |
| 1 | Reset | Button_Switch_THT:SW_PUSH_6mm | SW3 |
| 1 | Secondary | Button_Switch_THT:SW_PUSH_6mm | SW2 |
| 1 | Temp 1 | Chof747_Footprints:MJ2509N | J2 |
| 1 | Temp 2 | Chof747_Footprints:MJ2509N | J3 |
| 1 | XIAO-ESP32-C6-SMD | Chof747_MCUs:XIAO-ESP32-C6-DIP | U1 |
The 21 most common of 23 parts.
Similar boards
- 4 layers66.3 × 40.2 mm
Cm4 drone
dridri/bcflight
Raspberry Pi based drone flight controller and remote control
56 parts175GPL-3.0 - 4 layers192.1 × 126.9 mm
Stradex1
Bylin-code/Stradex1
STRADEX1 Documentation and Build Instructions ============== I've always wanted to put my violin skills to use in a MIDI environment, but there really isn't a controller on the market that can emulate the feel of a…
24 parts101 - 4 layers100 × 49.8 mm
- 2 layers96 × 74.4 mm
Monolith
luftaquila/monolith
DIY wireless real-time datalogging platform for Student Formula and Baja.
138 parts45 - 4 layers160 × 73.2 mm
MainPCB
doppelgrau/esp32-f9p-io-board
An IO-PCB (two motor-driver/H-bridge, CAN, RS232, ADS1115, relay, ethernet, ardusimple f9p compatible connector) with an ESP32 for 12V power, three 15V tolerant analog inputs, three 5V tolerant inputs.
162 parts39 - 2 layers140.7 × 86.5 mm
- 4 layers20 × 30 mm
NanoAmmeter v2
joeltroughton/nanoAmmeter
A small ammeter for measuring printed glucose biosensors
35 parts29
Questions
How big is the Oven tempsensor esp32c6 PCB?
It measures 53 × 41.5 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Oven tempsensor esp32c6 use?
23 parts, built around the ADS1115IDGS. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Oven tempsensor esp32c6 KiCad files?
From the chof747/oven-tempsensor-esp32c6 repository on GitHub, at the commit this page was made from: the board is oven-tempsensor-esp32c6.kicad_pcb and its schematic oven-tempsensor-esp32c6.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Oven tempsensor esp32c6 design in my own project?
Its repository publishes it under the CC0-1.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).