
JST mounter panelized
ChipCE/juice-plus-pcb
Varios PCB design for 3D printers and drones

Varios PCB design for 3D printers and drones
Pico extender is an open-source printed circuit board by ChipCE, from the ChipCE/juice-plus-pcb repository on GitHub, published under the GPL-3.0 licence. It is a 4-layer board with 94 parts on 68 nets, routed with 130 tracks and 8 vias.
It is built around the OKI-T/36W-W40N-C, BAV99 and NCV8402DD. Its parts include 35 resistors, 27 connectors, 14 diodes, 10 capacitors and 5 transistors. It belongs with the robots and motor control boards and the RP2040 boards of this library.
Varios PCB design for 3D printers and drones
| Qty | Value | Footprint | References |
|---|---|---|---|
| 15 | 1K | Resistor_SMD:R_0603_1608Metric | R2, R3, R8, R10, R11, R13, R14, R15, R18, R19, R20, R21, R26, R27, R29 |
| 8 | 100n | Capacitor_SMD:C_0603_1608Metric | C2, C4, C5, C6, C7, C8, C9, C10 |
| 7 | 10K | Resistor_SMD:R_0603_1608Metric | R4, R5, R9, R16, R17, R24, R25 |
| 6 | 2K37 | Resistor_SMD:R_0603_1608Metric | R30, R31, R32, R33, R34, R35 |
| 6 | BAV99 | Package_TO_SOT_SMD:SOT-323_SC-70 | D5, D8, D9, D12, D13, D14 |
| 5 | 1N914 | Diode_SMD:D_SOD-523 | D2, D3, D6, D10, D11 |
| 5 | NCV8402 | Package_TO_SOT_SMD:SOT-223 | Q1, Q2, Q3, Q4, Q5 |
| 3 | 1K8 | Resistor_SMD:R_0603_1608Metric | R12, R22, R23 |
| 2 | 4K7 | Resistor_SMD:R_0603_1608Metric | R1, R28 |
| 2 | I2C_2 | Connector_JST:JST_XH_B04B-XH-A_1x04_P2.50mm_Vertical | J21, J26 |
| 2 | OKI-T/36W-W40N-C | custom-footprints:OKI-T-DOSA-th | U2, U3 |
| 1 | 100u | Capacitor_SMD:CP_Elec_10x10 | C1 |
| 1 | 12V_LED | LED_SMD:LED_0805_2012Metric | D4 |
| 1 | 2K2 | Resistor_SMD:R_0603_1608Metric | R7 |
| 1 | 330u | Capacitor_SMD:CP_Elec_10x10 | C3 |
| 1 | 500R | Resistor_SMD:R_0603_1608Metric | R6 |
| 1 | 5V_LED | LED_SMD:LED_0805_2012Metric | D7 |
| 1 | ADC_GENERIC | Connector_JST:JST_XH_B02B-XH-A_1x02_P2.50mm_Vertical | J22 |
| 1 | ADC_PT1000 | Connector_JST:JST_XH_B02B-XH-A_1x02_P2.50mm_Vertical | J23 |
| 1 | ADC_RAW | Connector_JST:JST_XH_B03B-XH-A_1x03_P2.50mm_Vertical | J24 |
| 1 | Conn_01x02_Female | TerminalBlock_Phoenix:TerminalBlock_Phoenix_PT-1,5-2-5.0-H_1x02_P5.00mm_Horizontal | J1 |
| 1 | DI_1 | Connector_JST:JST_XH_B03B-XH-A_1x03_P2.50mm_Vertical | J18 |
| 1 | DI_2 | Connector_JST:JST_XH_B03B-XH-A_1x03_P2.50mm_Vertical | J19 |
| 1 | DO_1 | Connector_JST:JST_XH_B03B-XH-A_1x03_P2.50mm_Vertical | J13 |
| 1 | DO_2 | Connector_JST:JST_XH_B03B-XH-A_1x03_P2.50mm_Vertical | J14 |
| 1 | DO_3 | Connector_JST:JST_XH_B03B-XH-A_1x03_P2.50mm_Vertical | J15 |
| 1 | DO_4 | Connector_JST:JST_XH_B03B-XH-A_1x03_P2.50mm_Vertical | J16 |
| 1 | DO_5 | Connector_JST:JST_XH_B03B-XH-A_1x03_P2.50mm_Vertical | J17 |
| 1 | FAN_1 | Connector_JST:JST_XH_B03B-XH-A_1x03_P2.50mm_Vertical | J11 |
| 1 | FAN_1_V_SELECT | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J9 |
| 1 | FAN_2 | Connector_JST:JST_XH_B03B-XH-A_1x03_P2.50mm_Vertical | J12 |
| 1 | FAN_2_V_SELECT | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J10 |
| 1 | FAN_3 | Connector_JST:JST_XH_B03B-XH-A_1x03_P2.50mm_Vertical | J7 |
| 1 | FAN_3_V_SELECT | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J6 |
| 1 | FET_1 | Connector_JST:JST_XH_B02B-XH-A_1x02_P2.50mm_Vertical | J4 |
| 1 | FET_1_V_SELECT | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J2 |
| 1 | FET_2 | Connector_JST:JST_XH_B02B-XH-A_1x02_P2.50mm_Vertical | J5 |
| 1 | FET_2_V_SELECT | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J3 |
| 1 | I2C_1 | Connector_JST:JST_XH_B04B-XH-A_1x04_P2.50mm_Vertical | J20 |
| 1 | Raspberry-pico-smd | custom-footprints:Raspberry-pico-smd | U1 |
| 1 | SPI | Connector_JST:JST_XH_B06B-XH-A_1x06_P2.50mm_Vertical | J27 |
| 1 | USB | Connector_JST:JST_XH_B04B-XH-A_1x04_P2.50mm_Vertical | J25 |
| 1 | VB_SELECT | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J8 |
| 1 | VIN_LED | LED_SMD:LED_0805_2012Metric | D1 |

ChipCE/juice-plus-pcb
Varios PCB design for 3D printers and drones







ChipCE/juice-plus-pcb
Varios PCB design for 3D printers and drones







magkopian/raspberry-pi-compute-module-base-board
Base board for the Raspberry Pi Compute Module




BoltzRnD/SmartPrintCoreH7x
STM32H7 based Robust and Open Source 3D Printer Mainboard

emeb/r820t2
Breakout PCB design and STM32F0 firmware for the Rafael R820T2 tuner chip
94 parts, built around the OKI-T/36W-W40N-C, BAV99 and NCV8402DD. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the ChipCE/juice-plus-pcb repository on GitHub, at the commit this page was made from: the board is pico-extender/pico-extender.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).