Skip to the content
4 layers50 × 100 mmDigitizer, the printed circuit board in 3D
Size
50 × 100 mm
Copper layers
4
Thickness
1.6 mm
Parts
77
Nets
81
Pads
424
Tracks, vias
1,080, 174
Pours
18
Routed
Yes
KiCad
KiCad 4
Created
18 Dec 2018
Updated
28 Nov 2018

Overview

Digitizer is an open-source printed circuit board by chew-in, from the chew-in/digitizer-1 repository on GitHub. It is a 4-layer board of 50 × 100 mm with 77 parts on 81 nets, routed with 1,080 tracks and 174 vias.

It is built around the AD8014AR, NCP1117ST and AD9283BRS, with the 510CBA25M0000BAGR among its other parts. Its parts include 43 capacitors, 17 resistors, 9 ICs, 5 connectors and 2 diodes. It belongs with the FPGA and CPLD boards of this library.

Main components

4

README

hw/README.md

Digitizer (Hardware)

Hardware prototyping of a multichannel 8-bit, 100 MS/s digitizer.

Features

  • Two singled ended input channels
  • Low-pass filter designed using current feedback amplifier in a Sallen-Key topology
  • 8-bit, 100 MS/s ADCs
  • Reconfigurable FPGA
  • 32 I/O connections
  • 1 single-ended coax I/O
  • 4 JTAG connections

Modifications for Rev 0.1

  • Remove the solder mask covering the analog and trigger inputs
  • Exchange 4 pin header for a 6 pin header to include 3.3 V and GND from JTAG programmer
  • Copper fill the entire power plane
  • Add grounding strips on the front and back copper layers
  • Remove unused copper trace on the back copper layers
  • Slow the TCLK from FT232H programmer by bypassing to ground with 10's of pF

Parts

77
QtyValueFootprintReferences
41Csmd:0402C2, C11, C12, C14, C15, C16, C17, C18, C19, C20, C21, C22, C23, C24, C25, C100 +25
12Rsmd:0402R3, R4, R5, R6, R7, R11, R12, R13, R14, R15, R100, R101
550smd:0402R1, R2, R8, R9, R10
3NCP1117smd:SOT-223U6, U7, U8
3SMAconn:SMAJ1, J2, J3
21usmd:0402C1, C10
2AD8014smd:SOT-23-5U1, U3
2AD9283smd:SSOP-20U2, U4
2LEDsmd:0402D1, D2
1510CBA25M0000BAGRsmd:OSCG1
1Conn_x4conn:Conn_x4_StraightJ7
1Conn_x64conn:Conn_x64_RightAngleJ10
1MIC5270smd:SOT-23-5U9
1MachXO2smd:TQFP-144U5

Similar boards

  • 2 layers70.7 × 53.3 mmGladiolus, the printed circuit board in 3D

    Gladiolus

    greatfet-hardware/gladiolus

    a Software Defined Infrared (SDIR) neighbor

    159 parts19
  • 2 layers49.5 × 57.2 mmAdc dual pmod board, the printed circuit board in 3D

    Adc dual pmod board

    fpga-theremin/theremin

    Open source digital FPGA based theremin project

    64 parts11
  • 2 layers100.1 × 63.1 mmFg99, the printed circuit board in 3D

    Fg99

    endlos99/finalgrom99

    A cartridge for the TI 99/4A that runs ROM and GROM images from an SD card

    34 parts96GPL-3.0
  • 2 layers61.8 × 18.5 mmCh224baseProdt, the printed circuit board in 3D

    Ch224baseProdt

    SdtElectronics/Biscuits

    Miscellaneous PCB Works

    44 parts13
  • 2 layers67.4 × 54.3 mmWiFiMaster, the printed circuit board in 3D

    WiFiMaster

    Phunkafizer/AllSerial

    An universal sophisticated USB-serial converter

    63 parts6MIT
  • 2 layers66 × 26 mmSTM32-udemy, the printed circuit board in 3D

    STM32-udemy

    facens-omegabotz/stm32-board

    KiCad Projet of PCB design for a development board for the STM32f446 MCU

    31 parts3Apache-2.0
  • 2 layers35.8 × 70.1 mmMr107, the printed circuit board in 3D

    Mr107

    Maniak003/RADEX_MR107_Monitor

    Zabbix monitor for Radex MR107/MR107+ Radon detector

    73 parts1

Questions

How big is the Digitizer PCB?

It measures 50 × 100 mm and has 4 copper layers, 1.6 mm thick.

What parts does the Digitizer use?

77 parts, built around the AD8014AR, NCP1117ST, AD9283BRS and 510CBA25M0000BAGR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Digitizer KiCad files?

From the chew-in/digitizer-1 repository on GitHub, at the commit this page was made from: the board is hw/Digitizer.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Digitizer design in my own project?

Its repository states no licence, so its author keeps all rights: ask chew-in before reusing the design.