4 layers50 × 94.2 mm
4 layers37 × 50 mm
PeripherialModule
charvotj/AquaControlMy bachelor thesis, work in progress
- Size
- 37 × 50 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 21
- Nets
- 37
- Pads
- 118
- Tracks, vias
- 238, 47
- Pours
- 6
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 20 Jun 2023
- Updated
- 9 Jun 2024
Overview
PeripherialModule is an open-source printed circuit board by charvotj, from the charvotj/AquaControl repository on GitHub. It is a 4-layer board of 37 × 50 mm with 21 parts on 37 nets, routed with 238 tracks and 47 vias.
It is built around the PIC18F26Q83-I/5N and ATA6561-GAQW-N. Its parts include 7 connectors, 6 capacitors, 3 ICs, 2 resistors and 1 switch. It belongs with the PIC boards of this library.
Main components
2
PIC18F26Q83-I/5N
QFN-28-EP(6x6)-40℃~+85℃ 1.8V~5.5V 1KB 25 64KB 64MHz 8 Bit 8KB Built-in+External FLASH PIC QFN-28-EP(6x6) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
ATA6561-GAQW-N
SOIC-8-40℃~+150℃ 12uA 4.5V~5.5V 5Mbps 70mA CAN Transceiver SOIC-8 CAN Transceivers ROHSMicrochip TechnologyCAN Transceivers
README
README.mdDo not read me :)
It's work in progress and it's still completely uncomplete.
Pro průběžný progress:
Parts
21| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 0.1uF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1, C2, C4, C6 |
| 3 | Conn_01x03_Socket | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | J5, J6, J9 |
| 2 | G17C0900132EU | DSUB-G17C09001:G17C0900132EU | J3, J4 |
| 1 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 1 | 1k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2 |
| 1 | 22uF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C3 |
| 1 | 4.7uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C5 |
| 1 | ATA6561-GAQW-N | ATA6561-GAQW-N:SOIC127P600X175-8N | IC1 |
| 1 | Conn_01x05_Socket | Connector_PinSocket_2.54mm:PinSocket_1x05_P2.54mm_Vertical | J8 |
| 1 | Conn_02x11_Socket | Connector_PinSocket_2.54mm:PinSocket_2x11_P2.54mm_Vertical | J1 |
| 1 | LOGO | LOGO | G*** |
| 1 | PIC18F26Q83 | Package_SO:SSOP-28_5.3x10.2mm_P0.65mm | U2 |
| 1 | SW_Push | Button_Switch_SMD:SW_SPST_B3U-1000P | SW1 |
| 1 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1 |
| 1 | TLV76133DCYR | TLV761:SOT_8DCYR_TEX | U1 |
More from charvotj/AquaControl
2- 4 layers37 × 29.7 mm
Similar boards
- 4 layers160 × 73.2 mm
MainPCB
doppelgrau/esp32-f9p-io-board
An IO-PCB (two motor-driver/H-bridge, CAN, RS232, ADS1115, relay, ethernet, ardusimple f9p compatible connector) with an ESP32 for 12V power, three 15V tolerant analog inputs, three 5V tolerant inputs.
162 parts39 - 2 layers62.9 × 47 mm
ESP32 CAN
FL0WL0W/ESP32C3-CAN-Extender
This module uses an ESP32C3 with WiFi and BLE. It has 3 configurable outputs (5V push pull, Open Drain, 12V pullup), 4 analog or digital inputs, CAN transceiver, and an automotive power supply so it can be installed…
72 parts20GPL-3.0 - 2 layers109.5 × 51 mm
CANBOB (MAGE CANBOB-003)
Mage-Control-Systems-Ltd/CANBOB
A breakout board that enables USB or SPI to CAN communication using the MCP2515.
98 parts8CC-BY-4.0 - 4 layers90 × 45 mm
- 2 layers57 × 70 mm
- 4 layers125 × 80 mm
- 2 layers105.1 × 55.3 mm
- 2 layers60.4 × 98.7 mm
Glr pcb display can shield
green-lion-racing/glr-pcb-display-can-shield
STM32F469I-DISCO compatible CAN shield.
30 parts1GPL-3.0
Questions
How big is the PeripherialModule PCB?
It measures 37 × 50 mm and has 4 copper layers, 1.6 mm thick.
What parts does the PeripherialModule use?
21 parts, built around the PIC18F26Q83-I/5N and ATA6561-GAQW-N. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the PeripherialModule KiCad files?
From the charvotj/AquaControl repository on GitHub, at the commit this page was made from: the board is hw/peripherialModule/peripherialModule.kicad_pcb and its schematic hw/ledBoard/connectors.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the PeripherialModule design in my own project?
Its repository states no licence, so its author keeps all rights: ask charvotj before reusing the design.