4 layers37 × 29.7 mm
4 layers50 × 94.2 mm
AquaControl
charvotj/AquaControlMy bachelor thesis, work in progress
- Size
- 50 × 94.2 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 66
- Nets
- 63
- Pads
- 284
- Tracks, vias
- 1,009, 206
- Pours
- 23
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 20 Jun 2023
- Updated
- 9 Jun 2024
Overview
AquaControl is an open-source printed circuit board by charvotj, from the charvotj/AquaControl repository on GitHub. It is a 4-layer board of 50 × 94.2 mm with 66 parts on 63 nets, routed with 1,009 tracks and 206 vias.
It is built around the ATA6561-GAQW-N, 30R400UMR and SMD1812B110TF/24. Its parts include 27 capacitors, 9 resistors, 8 connectors, 5 ICs and 2 transistors. It belongs with the ESP32 boards of this library.
Main components
3
ATA6561-GAQW-N
SOIC-8-40℃~+150℃ 12uA 4.5V~5.5V 5Mbps 70mA CAN Transceiver SOIC-8 CAN Transceivers ROHSMicrochip TechnologyCAN Transceivers
30R400UMR
插件-40℃~+85℃ 10mΩ 12.7s 2.5W 30V 40A 4A 50mΩ 8A 插件 Resettable Fuses ROHSLittelfuseResettable Fuses
SMD1812B110TF/24
1812-40℃~+85℃ 1.1A 1.95A 200mΩ 20A 24V 2mm 3.41mm 4.73mm 500ms 60mΩ 800mW 1812 Resettable Fuses ROHSBrightkingResettable Fuses
README
README.mdDo not read me :)
It's work in progress and it's still completely uncomplete.
Pro průběžný progress:
Parts
66| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 0.1uF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1, C2, C3, C6, C7, C19, C20 |
| 5 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R5, R7, R9 |
| 4 | 0.01uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C12, C13, C14, C18 |
| 4 | 47uF | Capacitor_SMD:C_1210_3225Metric_Pad1.33x2.70mm_HandSolder | C10, C11, C16, C17 |
| 2 | 100nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C22, C23 |
| 2 | 10uF | Capacitor_SMD:C_1210_3225Metric_Pad1.33x2.70mm_HandSolder | C15, C26 |
| 2 | 22uF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C4, C9 |
| 2 | G17C0900132EU | DSUB-G17C09001:G17C0900132EU | J1, J2 |
| 2 | NMOS | NMOS-CSD18514:DQJ0008A | Q1, Q2 |
| 2 | NetTie_2 | NetTie:NetTie-2_SMD_Pad0.5mm | NT1, NT2 |
| 2 | SW_Push | Button_Switch_SMD:SW_SPST_B3U-1000P | BOOT, RST |
| 1 | 100k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R6 |
| 1 | 10m | Resistor_SMD:R_0815_2038Metric_Pad1.20x4.05mm_HandSolder | R3 |
| 1 | 1uF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C5 |
| 1 | 2.2uF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C8 |
| 1 | 2.7nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C27 |
| 1 | 22p | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C25 |
| 1 | 3.6uH | Inductor_SMD:L_Bourns-SRN8040_8x8.15mm | L1 |
| 1 | 30R400UMR | 30R400UMR:30R400UMR | F2 |
| 1 | 35.7k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | Rt1 |
| 1 | 4.7uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C24 |
| 1 | 41.2k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4 |
| 1 | 470nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C21 |
| 1 | 54.9k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R8 |
| 1 | ATA6561-GAQW-N | ATA6561-GAQW-N:SOIC127P600X175-8N | IC1 |
| 1 | Conn_02x16_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x16_P2.54mm_Vertical | J8 |
| 1 | Display | Connector_JST:JST_XH_B4B-XH-AM_1x04_P2.50mm_Vertical | J3 |
| 1 | ESP32-WROOM-E | PCM_Espressif:ESP32-WROOM-32E | U1 |
| 1 | JTAG | Connector_PinHeader_1.27mm:PinHeader_2x05_P1.27mm_Vertical | J6 |
| 1 | Jumper_2_Bridged | TestPoint:TestPoint_2Pads_Pitch2.54mm_Drill0.8mm | JP1 |
| 1 | LED strip | Connector_JST:JST_EH_B3B-EH-A_1x03_P2.50mm_Vertical | J4 |
| 1 | LM5148RGYR | LM5148:VQFN24_RGY_TEX | U4 |
| 1 | LOGO | LOGO | RYBA |
| 1 | POWER SUPLY | TerminalBlock:TerminalBlock_Altech_AK300-2_P5.00mm | J7 |
| 1 | Relays_board | Connector_JST:JST_XH_B4B-XH-AM_1x04_P2.50mm_Vertical | J5 |
| 1 | SMD1812B110TF/24 | Fuse:Fuse_1812_4532Metric | F1 |
| 1 | SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | SJ1 |
| 1 | TLV76133DCYR | TLV761:SOT_8DCYR_TEX | U2 |
| 1 | TXU0101DBVR | TXU0101:SOT-23-6-DBV_TEX | U3 |
The 62 most common of 66 parts.
More from charvotj/AquaControl
2- 4 layers37 × 50 mm
Similar boards
- 2 layers74 × 74 mm
- 4 layers160 × 73.2 mm
MainPCB
doppelgrau/esp32-f9p-io-board
An IO-PCB (two motor-driver/H-bridge, CAN, RS232, ADS1115, relay, ethernet, ardusimple f9p compatible connector) with an ESP32 for 12V power, three 15V tolerant analog inputs, three 5V tolerant inputs.
162 parts39 - 2 layers62.9 × 47 mm
ESP32 CAN
FL0WL0W/ESP32C3-CAN-Extender
This module uses an ESP32C3 with WiFi and BLE. It has 3 configurable outputs (5V push pull, Open Drain, 12V pullup), 4 analog or digital inputs, CAN transceiver, and an automotive power supply so it can be installed…
72 parts20GPL-3.0 - 2 layers109.5 × 51 mm
CANBOB (MAGE CANBOB-003)
Mage-Control-Systems-Ltd/CANBOB
A breakout board that enables USB or SPI to CAN communication using the MCP2515.
98 parts8CC-BY-4.0 - 4 layers90 × 45 mm
- 2 layers57 × 70 mm
- 4 layers125 × 80 mm
- 2 layers105.1 × 55.3 mm
Questions
How big is the AquaControl PCB?
It measures 50 × 94.2 mm and has 4 copper layers, 1.6 mm thick.
What parts does the AquaControl use?
66 parts, built around the ATA6561-GAQW-N, 30R400UMR and SMD1812B110TF/24. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the AquaControl KiCad files?
From the charvotj/AquaControl repository on GitHub, at the commit this page was made from: the board is hw/mainBoard/mainBoard.kicad_pcb and its schematic hw/ledBoard/connectors.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the AquaControl design in my own project?
Its repository states no licence, so its author keeps all rights: ask charvotj before reusing the design.