4 layers50 × 50 mm
ESP32-Sentinel Kinetic Wireless Dongle
alextrical/ESP32-Sentinel-Kinetic-Wireless-Dongle
ESP8266 based Re-implementation of the Vent-Axia Sentinel Kinetic Wired Remote Controller without a Display
81 parts6CERN-OHL-S-2.0
2 layers42.8 × 53 mm
Informer207
charcole/zmachine32709ZMachine3270
- Size
- 42.8 × 53 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 24
- Nets
- 74
- Pads
- 141
- Tracks, vias
- 265, 17
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 30 Jun 2020
- Updated
- 13 Sep 2020
Overview
Informer207 is an open-source printed circuit board by charcole, from the charcole/zmachine3270 repository on GitHub. It is a 2-layer board of 42.8 × 53 mm with 24 parts on 74 nets, routed with 265 tracks and 17 vias.
It is built around the ESP32-WROOM-32, MAX3232ID and AMS1117-3.3. Its parts include 7 capacitors, 6 resistors, 3 ICs, 3 diodes and 3 connectors. It belongs with the ESP32 boards of this library.
Main components
3
ESP32-WROOM-32
SMD,18x25.5mm-40℃~+85℃ -98dBm 2.4GHz 2.7V~3.6V 20dBm Bluetooth4.2 ESP32-DOWDQ6 UART、SDIO、SPI、I2C、GPIO、PWM、ADC、DAC SMD,25.5x18mm WiFi Modules ROHSEspressif SystemsWiFi Modules
MAX3232ID
SOIC-16-40℃~+85℃ 2 2 250Kbps 300uA 3V~5.5V Short-Circuit Protection Transceiver Yes ±15kV SOIC-16 RS232 ICs ROHSTexas InstrumentsRS232 ICs
AMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
Parts
24| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 100n | Capacitor_SMD:C_1206_3216Metric_Pad1.42x1.75mm_HandSolder | C1, C2, C3, C4, C5, C6 |
| 6 | 10K | Resistor_SMD:R_1206_3216Metric_Pad1.42x1.75mm_HandSolder | R1, R2, R3, R4, R5, R6 |
| 1 | 220u | Capacitor_Tantalum_SMD:CP_EIA-6032-20_AVX-F_Pad2.25x2.35mm_HandSolder | C7 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U3 |
| 1 | BOOT | Button_Switch_SMD:SW_SPST_CK_RS282G05A3 | SW2 |
| 1 | ESP32-WROOM-32 | RF_Module:ESP32-WROOM-32 | U1 |
| 1 | MAX3232 | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U2 |
| 1 | PROG | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J1 |
| 1 | PWR | LED_SMD:LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D3 |
| 1 | RECV | LED_SMD:LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D1 |
| 1 | RESET | Button_Switch_SMD:SW_SPST_CK_RS282G05A3 | SW1 |
| 1 | RS232 | Connector_Dsub:DSUB-25_Male_Horizontal_D25P13A4PL00LF | J3 |
| 1 | SEND | LED_SMD:LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D2 |
| 1 | USB_B_Micro | Connector_USB:USB_Micro-B_Molex-105017-0001 | J2 |
Questions
How big is the Informer207 PCB?
It measures 42.8 × 53 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Informer207 use?
24 parts, built around the ESP32-WROOM-32, MAX3232ID and AMS1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Informer207 KiCad files?
From the charcole/zmachine3270 repository on GitHub, at the commit this page was made from: the board is KiCad/Informer207.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Informer207 design in my own project?
Its repository states no licence, so its author keeps all rights: ask charcole before reusing the design.
Similar boards
- 2 layers63.8 × 52.7 mm
Projeto SIllion
Henriquepr15/ESP32-Motor-RS232
Projeto de hardware com ESP32, RS232 e controle de motor
59 parts - 4 layers70 × 157.5 mm
Controller Tv Lift
vyrubaev/TV-Lift-Controller
TVLift Controller is an intelligent controller for TV lift and lower mechanisms, based on the ESP32 microcontroller.
103 parts - 2 layers70 × 28 mm
NES MEP
DabblerDK/MEP-HW-SMD
Multipurpose Expansion Port (MEP) Surface Mount Device (SMD) Hardware for OSGP Smart Meters in Denmark
24 parts6 - 2 layers70 × 28 mm
NES MEP
DabblerDK/MEP-HW-THT
Multipurpose Expansion Port (MEP) Through-Hole Technology (THT) Hardware for OSGP Smart Meters in Denmark
24 parts3 - 2 layers137.5 × 51 mm
- 2 layers92 × 70 mm
- 2 layers10 × 26 mm
