

Raspbery Pi Pico coffe roaster project
- Size
- 83.8 × 70 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 25
- Nets
- 43
- Pads
- 157
- Tracks, vias
- 190, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 2 Feb 2026
- Updated
- 9 Apr 2026
Overview
Control is an open-source printed circuit board by CH-Microsystems, from the CH-Microsystems/pico_coffee_roaster repository on GitHub, published under the MIT licence. It is a 2-layer board of 83.8 × 70 mm with 25 parts on 43 nets, routed with 190 tracks and 0 vias.
It is built around the LM7805CT. Its parts include 9 connectors, 6 resistors, 2 capacitors, 2 switches and 1 IC. It belongs with the RP2040 boards of this library.
Main components
1README
README.mdPico Coffee Roaster
Mini torrador de café baseado no Raspberry Pi Pico.
Este firmware é capaz de realizar o controle de uma resistência utilizando um triac, além do controle de um motor e de um fan via PWM. Também estão disponíveis periféricos como displays, termistores NTC, termopares PT0, controle PID, entre outros.
O projeto utiliza o pico-sdk como base. Além do pico-sdk instalado e configurado no PATH do ambiente, também é necessário instalar o pico-extras.
Build e load
Para compilar o projeto utilize:
mkdir -p build
cd build
cmake ..
make -j$(nproc)Para enviar o firmware para o Pico utilize:
cd build
picotool load pico_roster.uf2 -fCertifique-se de que o picotool esteja instalado e disponível no PATH do sistema.
Dúvidas e Sugestões
Se tiver alguma dúvida ou sugestão, sinta-se à vontade para utilizar a seção de ISSUES no GitHub. Contribuições são bem-vindas e todos os Pull requests serão revisados e, se possível, mesclados.
Contribuição
Se deseja contribuir com o projeto, sinta-se à vontade para fazê-lo. O arquivo CONTRIBUTING.md contém as instruções necessárias.
Licença
Este projeto é licenciado sob a licença MIT, que concede total liberdade para uso.
Parts
25| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2, R3, R4 |
| 3 | PINHD_1x5_Female | Connector_PinSocket_2.54mm:PinSocket_1x05_P2.54mm_Vertical | J3, J6, J8 |
| 2 | PINHD_1x4_Female | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J5, J7 |
| 2 | PINHD_1x8_Female | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | J4, J9 |
| 2 | SW_Push | Button_Switch_THT:SW_PUSH_1P1T_6x3.5mm_H4.3_APEM_MJTP1243 | SW1, SW2 |
| 1 | 0.1uF | Capacitor_THT:C_Radial_D5.0mm_H7.0mm_P2.00mm | C2 |
| 1 | 0.33uF | Capacitor_THT:C_Radial_D5.0mm_H7.0mm_P2.00mm | C1 |
| 1 | 0R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R6 |
| 1 | 220 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R5 |
| 1 | 5mm | PCM_SparkFun-Connector:ScrewTerminal_1x02_P5.0mm | J1 |
| 1 | LED | PCM_LED_THT_AKL:LED_D5.0mm | D1 |
| 1 | LM7805CT | PCM_Package_TO_SOT_THT_AKL:TO-220-3_Vertical | U1 |
| 1 | PINHD_1x4_Male | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | RaspberryPi_Pico | Module:RaspberryPi_Pico_Common_Unspecified | A1 |
The 22 most common of 25 parts.
More from CH-Microsystems/pico_coffee_roaster
2- 2 layers63 × 60.5 mm

- 2 layers97.5 × 81 mm

Similar boards
- 2 layers173 × 85 mm

Audio board
EleonoreMizo/pedalevite
Pédale Vite — DIY multi-FX pedalboard for guitar/bass/etc.
268 parts101WTFPL - 2 layers169.3 × 128 mm

PSU PCB
ThomasVDD/SmartSupply
SmartSupply is a digital battery powered lab powersupply. It is Arduino compatible and can be controlled via PC over USB.
134 parts96 - 2 layers

T41-Main+RF board V012
DRWJSCHMIDT/T41
This is the repository for the officially released V10, V11, and V12 versions of the T41 Software Defined Transceiver hardware and kits.
255 parts66 - 4 layers97.6 × 145.1 mm

Analog and ad9958
balmerdx/BalmerDX_VNA
Vector Network Analyzer 10 KHz - 180 MHz
226 parts26BSD-2-Clause - 4 layers100 × 100 mm

- 2 layers68 × 89 mm

ParanoiaBox
profdc9/ParanoiaBox
A standalone elliptic curve/AES file encryption and decryption device
60 parts17 - 2 layers100 × 49.7 mm

- 4 layers100 × 100 mm

Questions
How big is the Control PCB?
It measures 83.8 × 70 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Control use?
25 parts, built around the LM7805CT. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Control KiCad files?
From the CH-Microsystems/pico_coffee_roaster repository on GitHub, at the commit this page was made from: the board is hardware/control/control.kicad_pcb and its schematic hardware/control/control.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Control design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).