Skip to the content
6 layers50 × 50 mmDac eval board, the printed circuit board in 3D

The official repository of the Cerybra Biocomputer.

Size
50 × 50 mm
Copper layers
6
Thickness
1.6 mm
Parts
30
Nets
26
Pads
149
Tracks, vias
200, 34
Pours
5
Routed
Yes
KiCad
KiCad 7 (file 20221018)
Created
20 May 2026
Updated
7 Aug 2026

Overview

Dac eval board is an open-source printed circuit board by Cerybra, from the Cerybra/physarum-biocomputer repository on GitHub, published under the AGPL-3.0 licence. It is a 6-layer board of 50 × 50 mm with 30 parts on 26 nets, routed with 200 tracks and 34 vias.

It is built around the LTC2666IUH-16#PBF. Its parts include 9 capacitors, 7 connectors, 1 resistor, 1 IC and 1 diode. It belongs with the audio and music boards of this library.

Main components

1

README

README.md

Physarum Biocomputer



Project Structure

Descriptions

The project structure is organized as follows:

  • 📂 adaptors: contains all of the hardware files for the various adaptors that are compatible with the biocomputer carrier board.

  • 📂 data: contains all of the experimentally collected data.

  • 📂 devices: contains all of the hardware files for both the open-air and enclosure-type devices.

  • 📂 modules: contains all of the hardware files for each of the biocomputer modules.

  • 📂 software: contains all of the software used in performing experiments.

  • 📂 simulations: contains all of the code used in performing equivalent circuit simulations.

  • 📂 plots: contains all of the code used in producing the main figures.

Structure

📂 repository

  • 📂 data
    • 📂 device-pulse-recordings
    • 📂 device-regression-recordings
    • 📂 device-sweep-recordings
    • 📂 eis-recordings
    • 📂 noise-recordings
    • 📂 reservoir-computing-recordings
  • 📂 modules
    • 📂 biocomputer-eval-motherboard
    • 📂 dac-eval-module
    • 📂 daq-eval-board
    • 📂 dual-rail-power-eval-module
    • 📂 selector-eval-module
  • 📂 adaptors
    • 📂 1x1-adaptor
    • 📂 4x1-adaptor
    • 📂 8x1-adaptor
    • 📂 card-half
    • 📂 card-full
    • 📂 configurable-adaptor
    • 📂 standard-adaptor
  • 📂 software
    • 📂 examples
  • 📂 devices
    • 📂 enclosures
    • 📂 pluggable
  • 📂 simulations
  • 📂 plots

Reproducibility

To reproduce all of the main figures, either clone the repository or download the data directory. Then, run each of the scripts within the plots/main directory.

Parts

30
QtyValueFootprintReferences
6100nFCapacitor_SMD:C_0402_1005MetricC102, C103, C105, C107, C108, C109
4Conn_CoaxialCRYBA_LTC2666_Eval:CONN_RF2-04A-T-00-50-G_ADMJ101, J102, J103, J104
4MountingHole_PadMountingHole:MountingHole_2.7mm_Pad_ViaH1, H2, H3, H4
31uFCapacitor_SMD:C_0402_1005MetricC101, C104, C106
3Jumper_3_Bridged12Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJP101, JP102, JP103
3TestPointCRYBA_LTC2666_Eval:KEYSTONE_5000TP101, TP104, TP105
2Conn_01x04Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ105, J107
11kResistor_SMD:R_0603_1608MetricR101
1Conn_01x08Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_VerticalJ106
1LEDLED_SMD:LED_0603_1608MetricD101
1LTC2666IUH-16#PBFPackage_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.45x3.45mmU101
1TestPointCRYBA_LTC2666_Eval:KEYSTONE_5001TP102

More from Cerybra/physarum-biocomputer

12
  • 6 layers165 × 100 mmDaq eval board, the printed circuit board in 3D

    Daq eval board

    Cerybra/physarum-biocomputer

    The official repository of the Cerybra Biocomputer.

    240 partsAGPL-3.0
  • 4 layers400 × 200 mmBiocomputer eval motherboard, the printed circuit board in 3D

    Biocomputer eval motherboard

    Cerybra/physarum-biocomputer

    The official repository of the Cerybra Biocomputer.

    143 partsAGPL-3.0
  • 4 layers65 × 100 mmDual rail power eval module, the printed circuit board in 3D

    Dual rail power eval module

    Cerybra/physarum-biocomputer

    The official repository of the Cerybra Biocomputer.

    102 partsAGPL-3.0
  • 4 layers50 × 50 mmSelector eval module, the printed circuit board in 3D

    Selector eval module

    Cerybra/physarum-biocomputer

    The official repository of the Cerybra Biocomputer.

    32 partsAGPL-3.0
  • 6 layers128.8 × 60 mmCard full, the printed circuit board in 3D

    Card full

    Cerybra/physarum-biocomputer

    The official repository of the Cerybra Biocomputer.

    25 partsAGPL-3.0
  • 2 layers60 × 60 mmConfigurable adaptor, the printed circuit board in 3D

    Configurable adaptor

    Cerybra/physarum-biocomputer

    The official repository of the Cerybra Biocomputer.

    20 partsAGPL-3.0
  • 2 layers80 × 60 mmCard half, the printed circuit board in 3D

    Card half

    Cerybra/physarum-biocomputer

    The official repository of the Cerybra Biocomputer.

    16 partsAGPL-3.0
  • 2 layers60 × 60 mm8x1-adaptor, the printed circuit board in 3D

    8x1-adaptor

    Cerybra/physarum-biocomputer

    The official repository of the Cerybra Biocomputer.

    12 partsAGPL-3.0
  • 2 layers60 × 60 mm4x1-adaptor, the printed circuit board in 3D

    4x1-adaptor

    Cerybra/physarum-biocomputer

    The official repository of the Cerybra Biocomputer.

    8 partsAGPL-3.0
  • 2 layers60 × 60 mm1x1-adaptor, the printed circuit board in 3D

    1x1-adaptor

    Cerybra/physarum-biocomputer

    The official repository of the Cerybra Biocomputer.

    5 partsAGPL-3.0
  • 2 layersReceptacle insert, the printed circuit board in 3D

    Receptacle insert

    Cerybra/physarum-biocomputer

    The official repository of the Cerybra Biocomputer.

    2 partsAGPL-3.0
  • 2 layers15 × 10 mmPluggable resistor, the printed circuit board in 3D

    Pluggable resistor

    Cerybra/physarum-biocomputer

    The official repository of the Cerybra Biocomputer.

    2 partsAGPL-3.0

Similar boards

  • 6 layers72 × 42 mmOdessa rev A, the printed circuit board in 3D

    Odessa rev A

    grodansparadis/can4vscp-odessa

    A generic module that can carry zeus expansion boards

    30 parts1
  • 6 layers22 × 30 mm22 hdi module, the printed circuit board in 3D

    22 hdi module

    RolandThsive/KiCad-EM-Stackup-Exporter-KESE

    Real 3D Models Of KiCad Boards Generator With The True Stack-Up And Copper Split Per Net

    30 parts1GPL-3.0
  • 6 layers73 × 55.3 mmNew york rev B, the printed circuit board in 3D

    New york rev B

    grodansparadis/can4vscp-newyork-lcd-display-controller

    CAN4VSCP New York LCD controller

    29 parts1
  • 6 layers44 × 94 mmPS FLYBACK-5W, the printed circuit board in 3D

    PS FLYBACK-5W

    jonahsaunders/planar-studio

    KiCad extension for the copper you can't buy as a part — design planar inductors, transformers, PCB motor stators, filters, and antennas, with electrical modeling and direct write-back to your board.

    29 parts4MIT
  • 6 layers12.8 × 11.4 mmMain PCB, the printed circuit board in 3D

    Main PCB

    Neurallabware/Airscope_toolbox

    A 1-gram wireless mesoscope for cortex-wide, single-cell-resolution imaging during unrestricted behaviour

    31 parts10
  • 6 layers14.8 × 12.6 mmPower Board, the printed circuit board in 3D

    Power Board

    esl-epfl/X-MODs

    Modular hardware platform based on the RISC-V X-HEEP family architecture developed at ESL, targeting ultra-low-power consumption and miniaturization, facilitating the creation of wearable devices for clinical trials

    31 parts3

Questions

How big is the Dac eval board PCB?

It measures 50 × 50 mm and has 6 copper layers, 1.6 mm thick.

What parts does the Dac eval board use?

30 parts, built around the LTC2666IUH-16#PBF. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Dac eval board KiCad files?

From the Cerybra/physarum-biocomputer repository on GitHub, at the commit this page was made from: the board is modules/dac-eval-module/dac-eval-board.kicad_pcb and its schematic adaptors/1x1-adaptor/1x1-adaptor.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Dac eval board design in my own project?

Its repository publishes it under the AGPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).