2 layers80 × 80 mm
2 layers131 × 111.1 mm
Igb01 module ctrl
centrevillage/igb011IGB01 Root Device
- Size
- 131 × 111.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 280
- Nets
- 217
- Pads
- 917
- Tracks, vias
- 1,901, 1,305
- Pours
- 43
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 16 Jan 2025
- Updated
- 25 Apr 2026
Overview
Igb01 module ctrl is an open-source printed circuit board by centrevillage, from the centrevillage/igb01 repository on GitHub, published under the MIT licence. It is a 2-layer board of 131 × 111.1 mm with 280 parts on 217 nets, routed with 1,901 tracks and 1,305 vias.
It is built around the 74AHCT1G125SE, R-78B5.0-2.0 and DAC8568IBPW, with the MCP6002-I/P, TLP2361(E and DSK34 among its other parts. Its parts include 88 resistors, 58 capacitors, 36 switches, 35 diodes and 34 connectors. It belongs with the STM32 boards of this library.
Main components
6
74AHCT1G125SE
SOT-353-40℃~+125℃ 1 1 4.5V~5.5V 4.7ns@5V,50pF 40uA 74AHCT 8mA 8mA Schmitt trigger Tri-State Unidirectional SOT-353 Buffers, Drivers, Receivers, Transceivers ROHSDiodes IncorporatedBuffers, Drivers, Receivers, Transceivers
R-78B5.0-2.0
SIP-3-40℃~+70℃ 1 11.5mm 17.5mm 2A 2mA 460kHz 5V 6.5V~32V 75mVp-p 8.5mm 820uF 94% Regulated type Short Circuit Protection、Automatic fault recovery SIP-3 Isolated Power Modules ROHSRECOM PowerIsolated Power Modules
DAC8568IBPW
TSSOP-16-40℃~+125℃ 12LSB 16 180nA 2.7V~5.5V 5us 8 Integrated buffer、Power-on reset、Power-down mode、Built-in reference source SPI、QSPI、MICROWIRE Voltage Buffer TSSOP-16 Digital to Analog Converters (DAC) ROHSTexas InstrumentsDigital To Analog Converters (DAC)
MCP6002-I/P
PDIP-8-40℃~+85℃ 1.8V~6V 100uA 1MHz 1pA 1pA 2 23mA 28nV/√Hz@1kHz 2uV/℃ 4.5mV 600V/ms 76dB ESD protection Rail-to-Rail Input, Rail-to-Rail Output PDIP-8 Operational Amplifier ROHSMicrochip TechnologyOperational Amplifier
TLP2361(E
SO-6,5LEAD-40℃~+125℃ 1.5V 1.6mA 10mA 15Mbps 2.7V~5.5V 20kV/us 3.75kV 5V 6V 6mA 80ns 80ns DC SO-6,5LEAD Logic Output Optoisolators ROHSToshibaLogic Output Optoisolators
DSK34
SOD-123FL-55℃~+125℃ 3A 40V 500uA 520mV@3A 80A Independent SOD-123FL Schottky Diodes ROHSTWGMCSchottky Diodes
README
README.mdigb01
IGB01 Root Device
Parts
280| Qty | Value | Footprint | References |
|---|---|---|---|
| 32 | 1N4148 | Diode_SMD:D_SOD-523 | D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23, D24 +16 |
| 29 | 100n | Capacitor_SMD:C_0603_1608Metric | C1, C2, C10, C11, C16, C17, C18, C21, C22, C23, C24, C25, C27, C29, C31, C37 +13 |
| 28 | SW_Push_45deg | custom:CandK_Comp_Button | SW10, SW11, SW12, SW13, SW14, SW15, SW16, SW17, SW18, SW19, SW20, SW21, SW22, SW23, SW24, SW25 +12 |
| 20 | 200k | Resistor_SMD:R_0603_1608Metric | R33, R35, R36, R37, R38, R39, R47, R49, R51, R52, R53, R54, R59, R60, R61, R62 +4 |
| 16 | 10k | Resistor_SMD:R_0603_1608Metric | R11, R12, R17, R18, R19, R20, R21, R26, R27, R28, R29, R46, R76, R77, R78, R79 |
| 14 | 18p | Capacitor_SMD:C_0603_1608Metric | C3, C4, C12, C13, C19, C20, C30, C32, C33, C34, C35, C36, C40, C41 |
| 14 | 1k | Resistor_SMD:R_0805_2012Metric | R2, R3, R4, R7, R8, R9, R43, R44, R57, R58, R70, R71, R83, R84 |
| 10 | 33k | Resistor_SMD:R_0603_1608Metric | R34, R41, R42, R48, R55, R56, R68, R69, R80, R81 |
| 9 | 47k | Resistor_SMD:R_0603_1608Metric | R30, R31, R32, R45, R63, R64, R65, R66, R67 |
| 8 | 100k | Resistor_SMD:R_0603_1608Metric | R13, R14, R15, R16, R22, R23, R24, R25 |
| 8 | SW_Push_45deg | custom:SW_PUSH_6mm_h13mm_mod | SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 |
| 7 | 47u | Capacitor_SMD:C_Elec_5x5.8 | C42, C44, C47, C48, C52, C55, C57 |
| 4 | 22 | Resistor_SMD:R_0603_1608Metric | R82, R85, R86, R87 |
| 4 | 220 | Resistor_SMD:R_1206_3216Metric | R1, R5, R6, R10 |
| 4 | 8p | Capacitor_SMD:C_0603_1608Metric | C5, C6, C14, C15 |
| 4 | LCD_MountingHole | custom:MountingHole_2.2mm_M2_mod | H2, H3, H4, H5 |
| 4 | TL074 | Package_SO:TSSOP-14_4.4x5mm_P0.65mm | U1, U2, U9, U11 |
| 4 | ~ | custom:RV142FPF-40B1 | RV1, RV2, RV3, RV4 |
| 3 | 74AHCT1G125 | Package_TO_SOT_SMD:SOT-23-5 | U3, U5, U6 |
| 3 | Conn_01x03 | Connector_PinHeader_2.00mm:PinHeader_1x03_P2.00mm_Vertical | J30, J31, J32 |
| 2 | 10u | Capacitor_SMD:C_0805_2012Metric | C26, C28 |
| 2 | 47 | Resistor_SMD:R_0603_1608Metric | R40, R50 |
| 2 | Conn_01x02 | Connector_PinHeader_2.00mm:PinHeader_1x02_P2.00mm_Vertical | J26, J34 |
| 2 | DSK34 | custom:SOD-123 | D34, D35 |
| 2 | LDK320-3.3V | Package_TO_SOT_SMD:SOT-23-5 | U13, U14 |
| 2 | Panel_MountingHole | custom:MountingHole_3.2mm_M3_mod | H6, H7 |
| 1 | 100u | Capacitor_SMD:C_Elec_5x5.8 | C51 |
| 1 | 12MHz | Crystal:Crystal_SMD_2520-4Pin_2.5x2.0mm | Y1 |
| 1 | 1N4148 | custom:SOD-123 | D1 |
| 1 | 1u | Capacitor_SMD:C_0805_2012Metric | C56 |
| 1 | 3.3k | Resistor_SMD:R_0603_1608Metric | R88 |
| 1 | DAC8568IBPW | Package_SO:TSSOP-16_4.4x5mm_P0.65mm | U8 |
| 1 | DISP_CON1 | Connector_PinHeader_2.00mm:PinHeader_1x04_P2.00mm_Vertical | J28 |
| 1 | JACK_CLK_OUT | custom:THONKICONN_center_smleg | J2 |
| 1 | JACK_CV_A_OUT | custom:THONKICONN_center_smleg | J4 |
| 1 | JACK_CV_B_OUT | custom:THONKICONN_center_smleg | J5 |
| 1 | JACK_CV_C_OUT | custom:THONKICONN_center_smleg | J6 |
| 1 | JACK_CV_D_OUT | custom:THONKICONN_center_smleg | J7 |
| 1 | JACK_CV_E_OUT | custom:THONKICONN_center_smleg | J15 |
| 1 | JACK_CV_F_OUT | custom:THONKICONN_center_smleg | J16 |
| 1 | JACK_CV_G_OUT | custom:THONKICONN_center_smleg | J17 |
| 1 | JACK_CV_H_OUT | custom:THONKICONN_center_smleg | J18 |
| 1 | JACK_CV_X_IN | custom:THONKICONN_center_smleg | J3 |
| 1 | JACK_CV_Y_IN | custom:THONKICONN_center_smleg | J14 |
| 1 | JACK_EXT_L_IN | custom:THONKICONN_center_smleg | J8 |
| 1 | JACK_EXT_R_IN | custom:THONKICONN_center_smleg | J9 |
| 1 | JACK_MAIN_L_OUT | custom:THONKICONN_center_smleg | J10 |
| 1 | JACK_MAIN_R_OUT | custom:THONKICONN_center_smleg | J11 |
| 1 | JACK_RST_OUT | custom:THONKICONN_center_smleg | J13 |
| 1 | JACK_RTN_L_IN | custom:THONKICONN_center_smleg | J19 |
| 1 | JACK_RTN_R_IN | custom:THONKICONN_center_smleg | J20 |
| 1 | JACK_SND_L_OUT | custom:THONKICONN_center_smleg | J21 |
| 1 | JACK_SND_R_OUT | custom:THONKICONN_center_smleg | J22 |
| 1 | JTAG | Connector_PinHeader_1.27mm:PinHeader_2x05_P1.27mm_Vertical | J23 |
| 1 | LEFT_CON | Connector_PinSocket_2.54mm:PinSocket_1x23_P2.54mm_Vertical | J24 |
| 1 | LM4040DBZ-10 | Package_TO_SOT_SMD:SOT-23 | U15 |
| 1 | MCP6002 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U7 |
| 1 | Micro_SD_Card | custom:MICRO_SD_VERTICAL | J29 |
| 1 | MountingHole | custom:MountingHole_3.2mm_M3_mod | H1 |
| 1 | POWER_CON | Connector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_Vertical | J33 |
| 1 | R-78B5.0-2.0 | Converter_DCDC:Converter_DCDC_RECOM_R-78B-2.0_THT | U12 |
| 1 | RIGHT_CON | Connector_PinSocket_2.54mm:PinSocket_1x23_P2.54mm_Vertical | J25 |
| 1 | STM32G431RBTx | Package_QFP:LQFP-64_10x10mm_P0.5mm | U10 |
| 1 | ST_JACK_MIDI_IN | custom:THONKICONN_center_smleg | J12 |
| 1 | ST_JACK_MIDI_OUT | custom:THONKICONN_center_smleg | J1 |
| 1 | SWD_CON | Connector_PinSocket_2.54mm:PinSocket_1x05_P2.54mm_Vertical | J27 |
| 1 | TLP2361 | Package_SO:SO-5-6_4.55x3.7mm_P1.27mm | U4 |
The 278 most common of 280 parts.
Questions
How big is the Igb01 module ctrl PCB?
It measures 131 × 111.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Igb01 module ctrl use?
280 parts, built around the 74AHCT1G125SE, R-78B5.0-2.0, DAC8568IBPW and MCP6002-I/P. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Igb01 module ctrl KiCad files?
From the centrevillage/igb01 repository on GitHub, at the commit this page was made from: the board is hardware/pcb/projects/igb01_module/igb01_module_ctrl/igb01_module_ctrl.kicad_pcb and its schematic hardware/pcb/projects/igb01_codec/igb01_codec.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Igb01 module ctrl design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
More from centrevillage/igb01
3- 2 layers130 × 87.5 mm
- 2 layers23.9 × 26.4 mm
Similar boards
- 4 layers65 × 30 mm
- 4 layers56 × 43.3 mm
- 6 layers91.8 × 139.8 mm
- 4 layers
CABadge V2 1
nbtca/CABadge
CABadge 计协电子吧唧：基于 ESP32-S3 的开源圆屏互动徽章，支持动态壁纸、触摸交互、Wi-Fi/BLE 和趣味小应用，提供 PCB、3D 打印外壳、固件及配套工具。
110 parts15MIT - 4 layers250.4 × 131 mm
Panel-16
geezacoleman/owl-driver-board
Development of a board that receives GPIO input and allows on/off control of connected solenoids.
939 parts14MIT - 4 layers47 × 59.7 mm
Tackle sensor hardware
Celnardur/rfc_tackle_sensor
Open a git bash terminal in the directory of your choosing and call the following command:
79 parts3MIT - 4 layers91 × 30.1 mm
Strelka Flight Computer
LulaUAV/Strelka-Flight-Computer
Strelka exists in the family of rocket dog flight computers. This flight computer is fully capable of deploying recovery events.
170 parts2 - 4 layers149.9 × 74.2 mm
BCD-0o27
petnica-rac-seminari/BCD-0o27-Tetris
The BalcCon Cyberdeck 0o27 (BCD-0o27) comes with a development framework that makes it easier to add functionality to the cyberdeck.
142 parts1