

Keeb rev1
- Size
- 142.2 × 99.6 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 70
- Nets
- 64
- Pads
- 274
- Tracks, vias
- 347, 32
- Pours
- 5
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 30 Mar 2024
- Updated
- 17 Oct 2026
Overview
Keeb rev1 is an open-source printed circuit board by celcius-plus-273, from the celcius-plus-273/split-keyboard repository on GitHub. It is a 2-layer board of 142.2 × 99.6 mm with 70 parts on 64 nets, routed with 347 tracks and 32 vias.
It is built around the ATMEGA32U4. Its parts include 23 diodes, 22 switches, 9 capacitors, 8 resistors and 1 IC. It belongs with the keyboards and input boards and the AVR (ATmega, ATtiny) boards of this library.
Main components
1README
README.mdsplit-keyboard
Parts
70| Qty | Value | Footprint | References |
|---|---|---|---|
| 21 | D | Diode_SMD:D_0603_1608Metric | D101, D102, D103, D104, D105, D106, D107, D108, D109, D110, D111, D112, D113, D114, D115, D116 +5 |
| 5 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C101, C102, C103, C104, C109 |
| 5 | MountingHole_Pad | MountingHole:MountingHole_2.2mm_M2_Pad_TopBottom | H101, H102, H103, H104, H105 |
| 2 | 10k | Resistor_SMD:R_0603_1608Metric | R101, R102 |
| 2 | 1k | Resistor_SMD:R_0603_1608Metric | R107, R108 |
| 2 | 22 | Resistor_SMD:R_0603_1608Metric | R105, R106 |
| 2 | 22pF | Capacitor_SMD:C_0603_1608Metric | C106, C107 |
| 2 | 5.1k | Resistor_SMD:R_0603_1608Metric | R103, R104 |
| 2 | GREEN | LED_SMD:LED_0603_1608Metric | D122, D123 |
| 1 | 16 MHz | Crystal:Crystal_SMD_Abracon_ABM8G-4Pin_3.2x2.5mm | Y101 |
| 1 | 1uF | Capacitor_SMD:C_0603_1608Metric | C108 |
| 1 | 4.7uF | Capacitor_SMD:C_0603_1608Metric | C105 |
| 1 | A | Button_Switch_Keyboard:SW_Cherry_MX_1.00u_PCB | SW108 |
| 1 | ATmega32U4 | Package_QFP:TQFP-44_10x10mm_P0.8mm | U101 |
| 1 | B | Button_Switch_Keyboard:SW_Cherry_MX_1.00u_PCB | SW118 |
| 1 | C | Button_Switch_Keyboard:SW_Cherry_MX_1.00u_PCB | SW116 |
| 1 | CTRL | Button_Switch_Keyboard:SW_Cherry_MX_1.00u_PCB | SW107 |
| 1 | D | Button_Switch_Keyboard:SW_Cherry_MX_1.00u_PCB | SW110 |
| 1 | E | Button_Switch_Keyboard:SW_Cherry_MX_1.00u_PCB | SW104 |
| 1 | ENTER | Button_Switch_Keyboard:SW_Cherry_MX_1.75u_PCB | SW121 |
| 1 | ESC | Button_Switch_Keyboard:SW_Cherry_MX_1.00u_PCB | SW101 |
| 1 | F | Button_Switch_Keyboard:SW_Cherry_MX_1.00u_PCB | SW111 |
| 1 | FN | Button_Switch_Keyboard:SW_Cherry_MX_1.00u_PCB | SW119 |
| 1 | G | Button_Switch_Keyboard:SW_Cherry_MX_1.00u_PCB | SW112 |
| 1 | Q | Button_Switch_Keyboard:SW_Cherry_MX_1.00u_PCB | SW102 |
| 1 | R | Button_Switch_Keyboard:SW_Cherry_MX_1.00u_PCB | SW105 |
| 1 | S | Button_Switch_Keyboard:SW_Cherry_MX_1.00u_PCB | SW109 |
| 1 | SHIFT | Button_Switch_Keyboard:SW_Cherry_MX_1.00u_PCB | SW113 |
| 1 | SPACE | Button_Switch_Keyboard:SW_Cherry_MX_1.00u_PCB | SW120 |
| 1 | T | Button_Switch_Keyboard:SW_Cherry_MX_1.00u_PCB | SW106 |
| 1 | USB_C_2.0 | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J101 |
| 1 | V | Button_Switch_Keyboard:SW_Cherry_MX_1.00u_PCB | SW117 |
| 1 | W | Button_Switch_Keyboard:SW_Cherry_MX_1.00u_PCB | SW103 |
| 1 | X | Button_Switch_Keyboard:SW_Cherry_MX_1.00u_PCB | SW115 |
| 1 | Z | Button_Switch_Keyboard:SW_Cherry_MX_1.00u_PCB | SW114 |
| 1 | reset_sw | Button_Switch_SMD:SW_Push_1P1T_XKB_TS-1187A | S101 |
More from celcius-plus-273/split-keyboard
6- 2 layers275.1 × 113 mm

- 2 layers133.4 × 110.2 mm

- 2 layers133.4 × 110.2 mm

- 2 layers152.4 × 114.3 mm

- 2 layers142.2 × 99.6 mm

- 2 layers77.5 × 29.2 mm

Similar boards
- 2 layers89 × 100 mm

Hub16
joshajohnson/Hub16
A macro pad with 16 keys, two rotary encoders, a four port USB hub, and plenty of LEDs!
132 parts388 - 2 layers22.9 × 36.7 mm

Usb2usb
tmk/USB2USB_Converter
USB to USB keyboard protocol converter supported by TMK keyboard firmware
26 parts152 - 2 layers303.6 × 96.1 mm

- 2 layers114.9 × 77 mm

- 2 layers444.1 × 151.2 mm

Gh80-3003
evyd13/gh80-series
GH80-1800, GH80-3700 and GH80-3003 by Evy (aka anykeys.eu)
287 parts69CC-BY-SA-4.0 - 2 layers232.2 × 76.7 mm

- 2 layers373.2 × 131.8 mm

- 2 layers17.8 × 33 mm

Questions
How big is the Keeb rev1 PCB?
It measures 142.2 × 99.6 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Keeb rev1 use?
70 parts, built around the ATMEGA32U4. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Keeb rev1 KiCad files?
From the celcius-plus-273/split-keyboard repository on GitHub, at the commit this page was made from: the board is keeb-rev1/keeb-rev1.kicad_pcb and its schematic keeb-rev1-mirror/keeb-rev1-mirror.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Keeb rev1 design in my own project?
Its repository states no licence, so its author keeps all rights: ask celcius-plus-273 before reusing the design.