

Aqm fan controller
KiCad PCB design for a PWM fan controller (ESP32-C3, TPS562201 buck converter)
- Size
- 65 × 25 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 32
- Nets
- 24
- Pads
- 113
- Tracks, vias
- 84, 18
- Pours
- 20
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 20 Mar 2026
- Updated
- 2 Apr 2026
Overview
Aqm fan controller is an open-source printed circuit board by cehbz, from the cehbz/aqm-fan-controller repository on GitHub. It is a 2-layer board of 65 × 25 mm with 32 parts on 24 nets, routed with 84 tracks and 18 vias.
It is built around the TPS562201DDC, AO3400A and SK6812, with the SS14F and SS34F among its other parts. Its parts include 8 capacitors, 6 resistors, 3 diodes, 3 connectors and 2 ICs. It belongs with the ESP32 and RISC-V boards of this library.
Main components
5TPS562201DDC
TSOT-23-6-40℃~+125℃@(TJ) 1 2A 380uA 4.5V~17V 580kHz 768mV~7V Adjustable Buck Built-in Overcurrent Protection、Light load efficient mode、Cycle-by-cycle current limiting、Hiccup current limiting Step-down type Yes TSOT-23-6 DC-DC Converters ROHSTexas InstrumentsDC-DC ConvertersAO3400A
SOT-23-55℃~+150℃ 1 N-channel 1.45V 1.4W 30V 48mΩ@2.5V 5.7A 50pF 630pF 75pF 7nC@10V N-Channel SOT-23 MOSFETs ROHSAlpha & Omega SemiconductorMOSFETsSK6812
SMD-4P,5.4x5mm-40℃~+85℃ 0.6mA 1.6mm 120° 160mcd~320mcd 1kHz 2000V 280mcd~515mcd 3.7V~5.5V 460nm~470nm 520nm~530nm 620nm~625nm 800Kbit/s 815mcd~1275mcd Built-in power-on reset circuit Semi-transparent lens SMD-4P,5.4x5mm RGB LEDs(Built-in IC) ROHSOPSCO OptoelectronicsRGB LEDs(Built-In IC)SS14F
SMAFSchottky DiodeshongjiachengSS34F
SMAF(DO-214AD)3A 40V 500nA 550mV@3A Independent SMAF(DO-214AD) Schottky Diodes ROHSFUXINSEMISchottky Diodes
Parts
32| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | ~ | MountingHole:MountingHole_2.7mm_M2.5_Pad_Via | H1, H2, H3, H4 |
| 3 | 22uF | Capacitor_SMD:C_0805_2012Metric | C3, C5, C6 |
| 2 | 0.1uF | Capacitor_SMD:C_1206_3216Metric | C7, C8 |
| 2 | 10uF | Capacitor_SMD:C_0805_2012Metric | C1, C2 |
| 2 | 4.7K | Resistor_SMD:R_1206_3216Metric | R5, R6 |
| 1 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C4 |
| 1 | 100R | Resistor_SMD:R_1206_3216Metric | R1 |
| 1 | 10K | Resistor_SMD:R_0603_1608Metric | R3 |
| 1 | 10K | Resistor_SMD:R_1206_3216Metric | R2 |
| 1 | 12V | TestPoint:TestPoint_Pad_D2.0mm | TP4 |
| 1 | 12v In | Connector_Wire:SolderWire-0.5sqmm_1x02_P4.6mm_D0.9mm_OD2.1mm | J2 |
| 1 | 3.3V | TestPoint:TestPoint_Pad_D2.0mm | TP3 |
| 1 | 4.7uH | Inductor_SMD:L_1008_2520Metric | L1 |
| 1 | 56K | Resistor_SMD:R_0603_1608Metric | R4 |
| 1 | 5V | TestPoint:TestPoint_Pad_D2.0mm | TP2 |
| 1 | AO3400A | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | ESP32-C3_SUPERMINI_TH | ESP32-C3_SUPERMINI_TH:MODULE_ESP32-C3_SUPERMINI_TH | U2 |
| 1 | Fan | Connector_Wire:SolderWire-0.5sqmm_1x02_P4.6mm_D0.9mm_OD2.1mm | J1 |
| 1 | GND | TestPoint:TestPoint_Pad_D2.0mm | TP1 |
| 1 | QWIIC | Connector_JST:JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_Horizontal | J3 |
| 1 | SK6812 | LED_SMD:LED_SK6812_PLCC4_5.0x5.0mm_P3.2mm | D3 |
| 1 | SS14F | Diode_SMD:D_SMA | D2 |
| 1 | SS34F | Diode_SMD:D_SMA | D1 |
| 1 | TPS562201 | easyeda2kicad:SOT-23-6_L2.9-W1.6-P0.95-LS2.8-BR | U1 |
Similar boards
- 2 layers82 × 58 mm

- 4 layers117 × 39.5 mm

- 2 layers79.4 × 21.6 mm

- 2 layers32 × 110 mm

- 2 layers96.2 × 64.2 mm

- 2 layers69 × 68.7 mm

SGW-01 V1.0
ymhtwe/SGW01
ESP-IDF based IoT gateway for solar pump monitoring and control using SIM7600 4G modem and Modbus RTU.
133 parts - 2 layers80 × 50 mm

Greaseweazle F7 Plus V2
aerobaticant/Greaseweazle-F7-Plus
My board design for Keir Fraser's Greaseweazle
66 parts30 - 4 layers70 × 47.5 mm

Questions
How big is the Aqm fan controller PCB?
It measures 65 × 25 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Aqm fan controller use?
32 parts, built around the TPS562201DDC, AO3400A, SK6812 and SS14F. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Aqm fan controller KiCad files?
From the cehbz/aqm-fan-controller repository on GitHub, at the commit this page was made from: the board is aqm_fan_controller.kicad_pcb and its schematic aqm_fan_controller.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Aqm fan controller design in my own project?
Its repository states no licence, so its author keeps all rights: ask cehbz before reusing the design.