2 layers
2 layers46.8 × 38 mm
SensorOne
cdcooperuk/kicad- Size
- 46.8 × 38 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 18
- Nets
- 16
- Pads
- 72
- Tracks, vias
- 162, 0
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 3
- Created
- 5 Dec 2013
- Updated
- 5 Dec 2013
Overview
SensorOne is an open-source printed circuit board by cdcooperuk, from the cdcooperuk/kicad repository on GitHub. It is a 2-layer board of 46.8 × 38 mm with 18 parts on 16 nets, routed with 162 tracks and 0 vias.
It is built around the ATMEGA328-PU and NRF24L01P-R. Its parts include 4 capacitors, 4 connectors, 1 resistor, 1 IC and 1 switch. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
2
ATMEGA328-PU
PDIP-28-40℃~+85℃ 1.8V~5.5V 10bit 1KB 20MHz 23 2KB 32KB 8 Bit AVR Built-in FLASH PDIP-28 Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
NRF24L01P-R
QFN-20-EP(4x4)-40℃~+85℃ -82dBm 0dBm 1.9V~3.6V 11.3mA 13.5mA 2.4GHz 2.4GHz~2.525GHz 2Mbps ISM Power-on reset function、Supports RSSI function、CRC check function、Automatic response function、Automatic retransmission function SPI transceiver QFN-20-EP(4x4) RF Transceiver ICs ROHSNordic SemiconRF Transceiver ICs
README
README.mdkicad
Parts
18| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 22pF | Discret:C1 | C2, C3 |
| 2 | MOUNTING_HOLE_PLACEHOLDER | MountingHole_RevA:MountingHole_3mm_RevA_Date21Jun2010 | MH1, MH2 |
| 1 | 100nF | Discret:C1 | C4 |
| 1 | 10k | Discret:R1 | R1 |
| 1 | 10uF | Capacitors:CP_5x11mm | C1 |
| 1 | 8MHz | Crystals:Crystal_HC49-U_Vertical_RevA_09Aug2010 | Y1 |
| 1 | ATMEGA328-P | DIP_Sockets:DIP-28__300 | IC1 |
| 1 | BATTERY | cdc:CR2032H | BT1 |
| 1 | I test | pin_array:PIN_ARRAY_2X1 | TP2 |
| 1 | NRF24L01+ | cdc:cdc_nrf24l01p | N1 |
| 1 | V test | pin_array:PIN_ARRAY_2X1 | TP1 |
| 1 | icsp | pin_array:pin_array_3x2 | P1 |
| 1 | on-switch | cdc:MINSLIDE_SPDT | SW2 |
| 1 | sens_ctct | Connect:bornier2 | J3 |
| 1 | sens_pir | Connect:bornier3 | J2 |
| 1 | sens_wbrk | Connect:bornier2 | J1 |
Questions
How big is the SensorOne PCB?
It measures 46.8 × 38 mm and has 2 copper layers, 1.6 mm thick.
What parts does the SensorOne use?
18 parts, built around the ATMEGA328-PU and NRF24L01P-R. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the SensorOne KiCad files?
From the cdcooperuk/kicad repository on GitHub, at the commit this page was made from: the board is SensorOne/SensorOne.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the SensorOne design in my own project?
Its repository states no licence, so its author keeps all rights: ask cdcooperuk before reusing the design.
Similar boards
- 4 layers40 × 50 mm
- 4 layers61.8 × 27.5 mm
Audio Processing HW V1.0
aitesam961/OpenADSP
An Embedded Digital Signal Processing Device for Audio signals.
83 parts4GPL-3.0 - 2 layers40.6 × 78.5 mm
Brooklyn
ARTS-Laboratory/DOVE
DOVE: Dynamics Observation and Vibration at the Edge. A deployable sensor package for vibration-based structural health monitoring.
39 parts4CC-BY-SA-4.0 - 2 layers50 × 90 mm
Pods
desertkun/pods
Compact game console on STM32F103RC6 chip with network module NRF24L01 and SH1106 display designed to be made as a pair.
32 parts4 - 2 layers21.6 × 48.3 mm
RF Arduino Pro Mini
etimou/Arduino-RF-Pro-Mini
Arduino Pro Mini + nRF24L01P = Arduino-RF-Pro-Mini
43 parts4 - 2 layers75.9 × 72.4 mm
OpenDTU
plewka/ESP-Solar_OpenDTU
PCB for OpenDTU in Cable Branchbox, LineSupply w. Fuses, RS485/RS232-Olimex, Relais, DS2485 OneWire, I2C-Header...
46 parts4GPL-3.0 - 4 layers62 × 60 mm
