2 layers231.3 × 162 mm
2 layers231.3 × 162 mm
BlakRPI Clive cyberdeck
- Size
- 231.3 × 162 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 165
- Nets
- 133
- Pads
- 762
- Tracks, vias
- 3,005, 414
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 12 Jun 2022
- Updated
- 12 Jun 2022
Overview
88RPI is an open-source printed circuit board by ccadic, from the ccadic/BlakRPI-Clive repository on GitHub. It is a 2-layer board of 231.3 × 162 mm with 165 parts on 133 nets, routed with 3,005 tracks and 414 vias.
It is built around the ATMEGA32U4-MU. Its parts include 62 switches, 60 diodes, 14 connectors, 11 resistors and 7 capacitors. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
1README
README.mdBlakRPI-Clive
BlakRPI Clive cyberdeck GPL3
Please note this project is reserved to people with a minimum of electronic skills. You need to know how to solder. You need to be able to make basic searches to find components by yourself This is not an out of the box working pc
@sulfuroid
Parts
165| Qty | Value | Footprint | References |
|---|---|---|---|
| 60 | 1N4148 | Diode_SMD:D_SOD-323_HandSoldering | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +44 |
| 60 | KailhChocLP-kailhchoclp | 27sharp:NewKailhLP | SW1, SW2, SW10, SW11, SW12, SW13, SW14, SW15, SW16, SW17, SW18, SW19, SW20, SW21, SW22, SW23 +44 |
| 5 | 2K | Resistor_SMD:R_0603_1608Metric | R5, R6, R7, R8, R9 |
| 4 | MountingHole | MountingHole:MountingHole_2.5mm_Pad_Via | H1, H2, H3, H4 |
| 3 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C4, C6, C7 |
| 2 | 10k | Resistor_SMD:R_0603_1608Metric | R1, R2 |
| 2 | 22pF | Capacitor_SMD:C_0603_1608Metric | C1, C2 |
| 2 | 22r | Resistor_SMD:R_0603_1608Metric | R3, R4 |
| 2 | 5.1k | Resistor_SMD:R_0603_1608Metric | R65, R66 |
| 2 | PWrSrc | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J12, J15 |
| 1 | 10uF | Capacitor_SMD:C_0603_1608Metric | C3 |
| 1 | 12000Lipo | 27sharp:12000LIPO | U5 |
| 1 | 1uF | Capacitor_SMD:C_0603_1608Metric | C5 |
| 1 | 88Display | 27sharp:Display88 | U2 |
| 1 | ATmega32U4-MU | Package_QFP:TQFP-44_10x10mm_P0.8mm | U1 |
| 1 | BatCnctr | Connector_JST:JST_PH_S2B-PH-SM4-TB_1x02-1MP_P2.00mm_Horizontal | J7 |
| 1 | Charger2A | 27sharp:Charger2A | U4 |
| 1 | Conn_01x04_Male | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J8 |
| 1 | Conn_01x06_Male | 27sharp:6padsfree | J2 |
| 1 | Crystal_Small | Crystal:Crystal_HC49-U_Vertical | Y1 |
| 1 | ISP-Prog | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J3 |
| 1 | InterKB | Button_Switch_SMD:SW_DIP_SPSTx02_Slide_9.78x7.26mm_W8.61mm_P2.54mm | SW62 |
| 1 | KBLEDSupply | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J5 |
| 1 | MIPIBOARD | 27sharp:MIPIBOARD | U3 |
| 1 | ON-OFFSW | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J10 |
| 1 | RPI_Connector-ML_RPi_GPIO | 27sharp:Raspberry_Pi3plus_SMDReverse | J9 |
| 1 | USBPOWER | 27sharp:GT-USB-7010 | J4 |
| 1 | USB_A | 18650:usbAsmd | J11 |
| 1 | USBplg32u4 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J1 |
| 1 | USBplgRPI | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J18 |
| 1 | internalgpio | Connector_PinSocket_2.54mm:PinSocket_2x20_P2.54mm_Vertical_SMD | J13 |
| 1 | reset_32u4 | Button_Switch_SMD:SW_SPST_B3U-1000P | SW61 |
The 164 most common of 165 parts.
More from ccadic/BlakRPI-Clive
1Similar boards
- 2 layers87.8 × 59.8 mm
FreeDeck SMD 2020-02
FreeYourStream/freedeck-hardware
all the stuff you need to build your own FreeDeck
37 parts772 - 2 layers54 × 15 mm
Xyp gpib
xyphro/UsbGpib
Versatile, cheap and portable USB to GPIB converter (USBTMC class based)
25 parts690MIT - 4 layers40.6 × 17.8 mm
- 2 layers37.3 × 14.7 mm
FairberryMainboard
Dakkaron/Fairberry
The goal of this project is to add a BlackBerry Q10 keyboard to non-BlackBerry phones. While this can easily be adapted to suit any other phone with an USB port at the bottom, I will focus on releasing files for the…
15 parts365 - 2 layers50 × 90 mm
- 4 layers66 × 115.3 mm
MemoryBrakout
ccadic/sharpikeebo
Miniature RPI Zero 2W shield with Sharp memory Display and USB Beyboard
194 parts143 - 2 layers33.9 × 19.2 mm
Diabolic drive programmer
unit72784/Diabolic-Drive
Stealthy, modern, wireless keystroke injection tool in a universal 4 layer double-sided flash drive PCB form factor with 64 GB storage
21 parts143 - 2 layers68 × 69.4 mm
Kowgary16 cfx
ChrisChrisLoLo/bancouver40
A 4x10 CFX spaced low-profile mechanical keyboard.
55 parts113GPL-3.0
Questions
How big is the 88RPI PCB?
It measures 231.3 × 162 mm and has 2 copper layers, 1.6 mm thick.
What parts does the 88RPI use?
165 parts, built around the ATMEGA32U4-MU. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the 88RPI KiCad files?
From the ccadic/BlakRPI-Clive repository on GitHub, at the commit this page was made from: the board is 88RPI.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the 88RPI design in my own project?
Its repository states no licence, so its author keeps all rights: ask ccadic before reusing the design.