

Board prototype TQFP
For now only a prototype PCB has been developped to test the firmware which will be QMK.
- Size
- 38.1 × 61 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 27
- Nets
- 45
- Pads
- 155
- Tracks, vias
- 286, 72
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 6 Apr 2026
- Updated
- 9 Apr 2026
Overview
Board prototype TQFP is an open-source printed circuit board by Cavendish06, from the Cavendish06/Keyboard-s-project repository on GitHub. It is a 4-layer board of 38.1 × 61 mm with 27 parts on 45 nets, routed with 286 tracks and 72 vias.
It is built around the ATMEGA32U4-MU and PRTR5V0U2X. Its parts include 11 capacitors, 4 connectors, 3 resistors, 2 ICs and 1 diode. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
2ATMEGA32U4-MU
VQFN-44-EP(7x7)-40℃~+85℃ 10bit 16MHz 1KB 2.5KB 2.7V~5.5V 26 32KB 8 Bit AVR Built-in FLASH VQFN-44-EP(7x7) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)PRTR5V0U2X
SOT-143-55℃~+125℃ 0.3pF、0.8pF 100W 10V、15V 5V 6.5V 6A 80nA ESD IEC 61000-4-2、IEC 61000-4-5、IEC 61000-4-4 Three channels Unidirectional SOT-143 ESD and Surge Protection (TVS/ESD) ROHSTECH PUBLICESD And Surge Protection (TVS/ESD)
README
README.mdFor now only a prototype PCB has been developped to test the firmware which will be QMK.
To see the board, load the .kicad_pro file into kicad.
Parts
27| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 0.1μF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2, C5, C7, C9, C10, C11 |
| 2 | 10k | Resistor_SMD:R_0201_0603Metric_Pad0.64x0.40mm_HandSolder | R1, R2 |
| 2 | 15pF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3, C4 |
| 2 | 22 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | D-, D+ |
| 2 | 5.1K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | CC1, CC2 |
| 1 | 10μF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C8 |
| 1 | 16MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm_HandSoldering | Y2 |
| 1 | 1μF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C6 |
| 1 | 330 | Resistor_SMD:R_0201_0603Metric_Pad0.64x0.40mm_HandSolder | R3 |
| 1 | 500m | Module:Polyfuse 1206 | F1 |
| 1 | ATmega32U4-M | Package_QFP:TQFP-44_10x10mm_P0.8mm | U1 |
| 1 | AVR-ISP-6 | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical_SMD | J4 |
| 1 | Conn_01x07_Pin | Connector_PinSocket_2.54mm:PinSocket_1x07_P2.54mm_Vertical | J2 |
| 1 | Conn_01x20_Socket | Connector_PinSocket_2.54mm:PinSocket_1x20_P2.54mm_Vertical | J1 |
| 1 | PRTR5V0U2X | Package_TO_SOT_SMD:SOT-143 | D1 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_G-Switch_GT-USB-7010ASV | J3 |
| 1 | ~ | Button_Switch_SMD:SW_SPST_SKQG_WithStem | U2 |
Similar boards
- 2 layers344 × 124.5 mm

- 2 layers285 × 95.1 mm

- 2 layers285 × 95.1 mm

- 2 layers284.3 × 116.2 mm

- 2 layers285.7 × 95.5 mm

Jones
jpskenn/Jones
Row-staggered 60% keyboard with gapless R2-R3 row. GH60 case compatible.
249 parts12MIT - 2 layers285 × 95.1 mm

Nora
jpskenn/Nora
Narrow pitch keyboard with Choc switches and keycaps. GH60 compatible.
303 parts12MIT - 2 layers209.6 × 76.2 mm

Didaktik
calvin-mcd/Didaktik-40
a 40s keyboard inspired by the Didaktik computer & keyboard
129 parts9GPL-3.0 - 2 layers228.4 × 85 mm

LeChiffre
paindrivendev/le-yiffre
Le Yiffre is a modified hotswap Le Chiffre pcb as an experimental design with different thumb clusters.Thanks to tominabox1 for creating Le Chiffre Keyboard and making it open source.
108 parts8
Questions
How big is the Board prototype TQFP PCB?
It measures 38.1 × 61 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Board prototype TQFP use?
27 parts, built around the ATMEGA32U4-MU and PRTR5V0U2X. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Board prototype TQFP KiCad files?
From the Cavendish06/Keyboard-s-project repository on GitHub, at the commit this page was made from: the board is Board prototype TQFP.kicad_pcb and its schematic Board prototype TQFP.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Board prototype TQFP design in my own project?
Its repository states no licence, so its author keeps all rights: ask Cavendish06 before reusing the design.