
Panel daisy
ohmtech-rdi/eurorack-blocks
Software to Hardware Prototyping for Eurorack using C++, Max/Gen~ or Faust

Designed for can opener. Uses Arduino Nano and drv8825 / A4988
Canopener is an open-source printed circuit board by castortut, from the castortut/GeneralStepperMotorControllerPCB repository on GitHub. It is a 2-layer board of 100 × 80 mm with 25 parts on 38 nets, routed with 143 tracks and 0 vias.
It is built around the R-78E5.0-0.5. Its parts include 9 connectors, 3 capacitors, 1 resistor and 1 IC. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Designed for can opener. Uses Arduino Nano and drv8825 / A4988
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | Jumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP1, M0, M1, M2 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 3 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J1, J8, J9 |
| 2 | 10u | Capacitor_SMD:C_0603_1608Metric | C1, C2 |
| 1 | 100u | Capacitor_THT:CP_Radial_D8.0mm_P3.50mm | C5 |
| 1 | Arduino_Nano_v3.x | Module:Arduino_Nano | A1 |
| 1 | CASTOR | 0_JLCPCB_Footprints:Castor logo | LOGO1 |
| 1 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J7 |
| 1 | Conn_01x08 | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J3 |
| 1 | Pololu_Breakout_DRV8825 | Module:Pololu_Breakout-16_15.2x20.3mm | A3 |
| 1 | R | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | R-78E5.0-0.5 | Converter_DCDC:Converter_DCDC_RECOM_R-78E-0.5_THT | U1 |
| 1 | Screw_Terminal_01x02 | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | J2 |
| 1 | Screw_Terminal_01x03 | TerminalBlock:TerminalBlock_bornier-3_P5.08mm | J5 |
| 1 | Screw_Terminal_01x04 | Connector_Phoenix_SPT:PhoenixContact_SPT_2.5_4-V-5.0-EX_1x04_P5.0mm_Vertical | J4 |
| 1 | Screw_Terminal_01x08 | Connector_Phoenix_SPT:PhoenixContact_SPT_2.5_8-V-5.0-EX_1x08_P5.0mm_Vertical | J6 |

ohmtech-rdi/eurorack-blocks
Software to Hardware Prototyping for Eurorack using C++, Max/Gen~ or Faust

cvonk/OPNpool
Integrates the functionality of a Pentair pool controller into the smart home using ESP32 SoC.

Edging-Machines/Edging-Machines
This repository is intended to contain as much information as possible about building, designing, prototyping, and using automated edging machines.



emeb/up5k_osc
The brute-force approach is to synthesize these analog waveforms at sufficiently high sample rates that the timing jitter becomes imperceptible.

Rodemfr/MicronetToNMEA
A NMEA 0183 converter for Raymarine's wireless instruments ... and much more !

BelaPlatform/gliss-hardware
You can find the source KiCad files for the Gliss module in this repository. This project is open hardware and under the Creative Commons Share Alike license 4.0.
It measures 100 × 80 mm and has 2 copper layers, 1.6 mm thick.
25 parts, built around the R-78E5.0-0.5. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the castortut/GeneralStepperMotorControllerPCB repository on GitHub, at the commit this page was made from: the board is canopener.kicad_pcb and its schematic canopener.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask castortut before reusing the design.