4 layers70 × 56 mm
2 layers80 × 70 mm
Openkayo
CapnKernel/openkayoA version of @jonoxer's OpenKayo board, done in KiCad
- Size
- 80 × 70 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 82
- Nets
- 92
- Pads
- 315
- Tracks, vias
- 499, 58
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 17 Apr 2024
- Updated
- 2 Jun 2026
Overview
Openkayo is an open-source printed circuit board by CapnKernel, from the CapnKernel/openkayo repository on GitHub. It is a 2-layer board of 80 × 70 mm with 82 parts on 92 nets, routed with 499 tracks and 58 vias.
It is built around the TCAN332D, ESP32-S3-WROOM-1-N8 and TUSB2036VF, with the SS56 and AP2112K-3.3 among its other parts. Its parts include 26 capacitors, 26 resistors, 7 connectors, 4 ICs and 4 diodes. It belongs with the ESP32 boards of this library.
Main components
5
TCAN332D
SOIC-8-40℃~+125℃ 1Mbps 3V~3.6V 60mA CAN Transceiver SOIC-8 CAN Transceivers ROHSTexas InstrumentsCAN Transceivers
ESP32-S3-WROOM-1-N8
SMD,25.5x18mm-40℃~+85℃ -98.2dBm 2.4GHz 20.5dBm 355mA 3V~3.6V 95mA Bluetooth5.0 ESP32-S3 Chip On-board PCB Antenna UART、SPI、I2C、I2S、USB SMD,25.5x18mm WiFi Modules ROHSEspressif SystemsWiFi Modules
TUSB2036VF
LQFP-32(7x7)LQFP-32(7x7) USB HUB Controllers ROHSTexas InstrumentsUSB Converters
SS56
SMA(DO-214AC)Schottky Diodeshongjiacheng
AP2112K-3.3
SOT253.3V 600mA CMOS Low Dropout Linear Regulator with EnableDiodes IncorporatedUncategorised
Parts
82| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 22p | Capacitor_SMD:C_0603_1608Metric | C10, C11, C12, C13, C14, C15 |
| 6 | 22u | Capacitor_SMD:C_0805_2012Metric | C4, C5, C20, C21, C22, C26 |
| 5 | 15k | Resistor_SMD:R_0603_1608Metric | R3, R6, R7, R9, R12 |
| 4 | 30R | Resistor_SMD:R_0603_1608Metric | R13, R14, R27, R29 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 3 | 10u | Capacitor_SMD:C_0805_2012Metric | C3, C23, C24 |
| 3 | 10u 35V | Capacitor_SMD:C_0805_2012Metric | C2, C17, C27 |
| 3 | Fuse | openkayo:Fuse_2018_5045Metric | F1, F2, F4 |
| 2 | 10k | Resistor_SMD:R_0805_2012Metric | R17, R20 |
| 2 | 15k | Resistor_SMD:R_0805_2012Metric | R23, R26 |
| 2 | 220u 35V | Capacitor_SMD:CP_Elec_8x10 | C7, C8 |
| 2 | 22p | Capacitor_SMD:C_0402_1005Metric | C18, C19 |
| 2 | 30R | Resistor_SMD:R_0805_2012Metric | R21, R22 |
| 2 | 4k7 | Resistor_SMD:R_0805_2012Metric | R18, R24 |
| 2 | 5k1 | Resistor_SMD:R_0603_1608Metric | R2, R10 |
| 2 | SS56 | Diode_SMD:D_SMA | D1, D3 |
| 2 | USB_A | Connector_USB:USB_A_CONNFLY_DS1095-WNR0 | J6, J7 |
| 1 | 100k | Resistor_SMD:R_0805_2012Metric | R16 |
| 1 | 100n | Capacitor_SMD:C_0805_2012Metric | C16 |
| 1 | 100n 50V | Capacitor_SMD:C_0603_1608Metric | C9 |
| 1 | 120R | Resistor_SMD:R_2512_6332Metric | R1 |
| 1 | 1k | Resistor_SMD:R_0603_1608Metric | R5 |
| 1 | 1k5 | Resistor_SMD:R_0603_1608Metric | R4 |
| 1 | 1u | Capacitor_SMD:C_0603_1608Metric | C1 |
| 1 | 220u 35v | Capacitor_SMD:CP_Elec_8x10 | C6 |
| 1 | 24k9 | Resistor_SMD:R_0603_1608Metric | R11 |
| 1 | 2k2 | Resistor_SMD:R_0603_1608Metric | R8 |
| 1 | 48MHz | Package_TO_SOT_SMD:SOT-23-5 | IC1 |
| 1 | 5A | openkayo:Fuseholder_Blade | F3 |
| 1 | 64k9 | Resistor_SMD:R_0805_2012Metric | R15 |
| 1 | AP2112K-3.3 | Package_TO_SOT_SMD:SOT-23-5 | VR2 |
| 1 | BLUE | LED_SMD:LED_0603_1608Metric | LED1 |
| 1 | CAN_BUS | TerminalBlock_MetzConnect:TerminalBlock_MetzConnect_Type086_RT03404HBLC_1x04_P3.81mm_Horizontal | J3 |
| 1 | CAN_TERM | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | Conn_01x02 | TerminalBlock_MetzConnect:TerminalBlock_MetzConnect_Type086_RT03402HBLC_1x02_P3.81mm_Horizontal | J5 |
| 1 | Conn_01x03_Socket | TerminalBlock_MetzConnect:TerminalBlock_MetzConnect_Type086_RT03403HBLC_1x03_P3.81mm_Horizontal | J1 |
| 1 | D_TVS_Dual_ACA | Package_TO_SOT_SMD:SOT-23-3 | D2 |
| 1 | ESP32-S3-WROOM-1 | openkayo:ESP32-S3-WROOM-1 | M1 |
| 1 | LMR38020 | Package_SO:Texas_HSOP-8-1EP_3.9x4.9mm_P1.27mm_ThermalVias | VR1 |
| 1 | RESET | Button_Switch_SMD:SW_SPST_TL3342 | S1 |
| 1 | SNOOT | Button_Switch_SMD:SW_SPST_TL3342 | S2 |
| 1 | Speaker_Crystal | Buzzer_Beeper:Buzzer_CUI_CPT-9019S-SMT | LS1 |
| 1 | TCAN332 | Package_SO:SO-8_3.9x4.9mm_P1.27mm | IC2 |
| 1 | TUSB2036VF | Package_QFP:LQFP-32_7x7mm_P0.8mm | IC3 |
| 1 | USB_C_Receptacle_USB2.0 | Connector_USB:USB_C_Receptacle_Amphenol_12401610E4-2A | J10 |
| 1 | VLS5045 15uH | Inductor_SMD:L_TDK_VLS6045EX_VLS6045AF | L1 |
| 1 | Varistor | Resistor_SMD:R_1210_3225Metric | U1 |
Questions
How big is the Openkayo PCB?
It measures 80 × 70 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Openkayo use?
82 parts, built around the TCAN332D, ESP32-S3-WROOM-1-N8, TUSB2036VF and SS56. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Openkayo KiCad files?
From the CapnKernel/openkayo repository on GitHub, at the commit this page was made from: the board is openkayo.kicad_pcb and its schematic hub.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Openkayo design in my own project?
Its repository states no licence, so its author keeps all rights: ask CapnKernel before reusing the design.
Similar boards
- 2 layers
- 4 layers60 × 60 mm
Usb switch
alvarop/debugotron
Debugotron is a collection of debugging/automation tools I've wanted in the past but didn't have access to. Currently, the tools include:
77 parts52BSD-3-Clause - 2 layers99 × 75.7 mm
- 4 layers101.6 × 141.7 mm
- 2 layers85 × 52 mm
- 2 layers371.5 × 152.4 mm
- 2 layers75.5 × 24.5 mm
Usb interface
rkiendl/oe2lsp_USB-Interface
primitive and simple USB interfave for classic Ham Radio transceivers. - Brings the TRX to the 21st century and makes the operation of digi modes reliable and easy. - No more cables and adapters - KiCad based
97 partsCC0-1.0