2 layers33 × 30 mm
Mora villogo
kissadamfkut/mora_blinker
Simple LED blinker with ATtiny13A for educational purposes
21 parts34MIT
2 layers55.9 × 10.7 mm
Pinpointer
canabis5w5/pinpointerpinpointer on attiny13
- Size
- 55.9 × 10.7 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 23
- Nets
- 16
- Pads
- 55
- Tracks, vias
- 112, 0
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 8 Oct 2023
- Updated
- 29 Oct 2023
Overview
Pinpointer is an open-source printed circuit board by canabis5w5, from the canabis5w5/pinpointer repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 55.9 × 10.7 mm with 23 parts on 16 nets, routed with 112 tracks and 0 vias.
It is built around the ATTINY13A-SSU. Its parts include 7 capacitors, 7 resistors, 3 diodes, 2 inductors and 1 IC. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
1Parts
23| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 100n | Capacitor_SMD:C_1206_3216Metric | C2, C3 |
| 2 | 10k | Resistor_SMD:R_1206_3216Metric | R1, R5 |
| 2 | 10n | Capacitor_SMD:C_1206_3216Metric | C5, C6 |
| 2 | 200 витков | Capacitor_THT:C_Radial_D6.3mm_H11.0mm_P2.50mm | L1, L2 |
| 2 | D | Diode_SMD:D_1206_3216Metric | D2, D3 |
| 1 | 100u | Capacitor_SMD:C_1206_3216Metric | C1 |
| 1 | 1M | Resistor_SMD:R_1206_3216Metric | R3 |
| 1 | 1k | Resistor_SMD:R_1206_3216Metric | R7 |
| 1 | 1u | Capacitor_Tantalum_SMD:CP_EIA-3216-10_Kemet-I | C4 |
| 1 | 300 | Resistor_SMD:R_1206_3216Metric | R2 |
| 1 | 4k7 | Resistor_SMD:R_1206_3216Metric | R4 |
| 1 | 510k | Resistor_SMD:R_1206_3216Metric | R6 |
| 1 | 68n | Capacitor_SMD:C_1206_3216Metric | C7 |
| 1 | ATtiny13A-SS | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U1 |
| 1 | BC160 | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | Buzzer | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | BZ1 |
| 1 | LED | Diode_SMD:D_1206_3216Metric | D1 |
| 1 | SW_SPST | Button_Switch_THT:SW_PUSH_6mm | SW1 |
Questions
How big is the Pinpointer PCB?
It measures 55.9 × 10.7 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Pinpointer use?
23 parts, built around the ATTINY13A-SSU. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Pinpointer KiCad files?
From the canabis5w5/pinpointer repository on GitHub, at the commit this page was made from: the board is pcb/pinpointer.kicad_pcb and its schematic pcb/pinpointer.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Pinpointer design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers200 × 100 mm
Keyboard
dragonlock2/kicadboards
Offsite backup for the miscellaneous KiCad boards that don't fit elsewhere
225 parts14Apache-2.0 - 2 layers
TX5823
ep092/TX5823
FPV Sender mit Kanalwahl und konfiguration über SPI. Integriertes OSD mit MAX7456 und Spannungswandlern für 5V, 3,3V und 12V über einen Eingangsspannungsbereich von 8V bis 25.2V.
94 parts9 - 2 layers10.2 × 22.3 mm
- 2 layers27.9 × 66.2 mm
- 2 layers
- 2 layers50 × 50 mm
- 2 layers90 × 100 mm
Meshcore NaIon
Alksndr55/mesh-repeater
Mesh Repeater v1 — одноплатный LoRa-репитер для MeshCore и Meshtastic, 90×100 мм. Упор на максимальное энергосбережение и работу в суровых сибирских зимах. Солнечный зарядник, Na-ion 1S / LTO 2S.
154 parts3