
Indoor bike computer motherboard
Wh1teRabbitHU/indoor-bike-computer
It's a custom computer for indoor bikes to measure cadence, speed and power, store sessions, visualise ongoing statistics and replace non chargeable solutions

This is a repo for my new gaming keyboard, which will include all files (eventually =) )
HishBoard v1 is an open-source printed circuit board by camelone49, from the camelone49/HishBoard_v1 repository on GitHub. It is a 4-layer board of 362.5 × 166 mm with 342 parts on 266 nets, routed with 3,704 tracks and 959 vias.
It is built around the CH340C, ESP32-WROOM-32E and SN74LV1T34DBV, with the MAX77837EWA+T, MAX17055ETB+T and USBLC6-2SC6 among its other parts. Its parts include 174 diodes, 88 switches, 38 capacitors, 12 resistors and 9 ICs. It belongs with the ESP32 boards of this library.
This is a repo for my new gaming keyboard, which will include all files (eventually =) )
The Board is done using KiCad and is designed to meet my special requirements:
What is missing:
Some Pictures:
(1): PCB Mode
(2): 3D Rendering
(3): Schematic without Key Matrix and Electrical Stuff
| Qty | Value | Footprint | References |
|---|---|---|---|
| 87 | Inolux_IN-PI554FCH | customdcdcconverters:RGB_hole_5050_inolux | D100, D101, D102, D103, D104, D105, D106, D107, D108, D109, D110, D111, D112, D113, D114, D115 +71 |
| 85 | Diode | ScottoKeebs_Components:Diode_DO-35 | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +69 |
| 75 | Keyswitch | ScottoKeebs_MX:MX_PCB_1.00u | S1, S2, S10, S11, S12, S13, S14, S15, S16, S17, S18, S19, S20, S21, S22, S23 +59 |
| 7 | , , , , , , | ||
| 6 | 22 uF/6.3V | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C10, C15, C26, C27, C28 |
| 5 | 0.1 uF/6.3V | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C4, C6, C7, C13, C24 |
| 4 | 100uF/10V | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C30, C31, C32, C33 |
| 4 | Keyswitch | ScottoKeebs_MX:MX_PCB_1.25u | S56, S73, S75, S76 |
| 3 | 1 uF/6.3V | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C18, C19, C20 |
| 2 | 10 uF/10V | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C37, C38 |
| 2 | 2.2 uH | customdcdcconverters:INDPM110100X400N | L2, L3 |
| 2 | 4.7 uF/35V | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C12, C35 |
| 2 | 4.7k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R3 |
| 2 | BSS138 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2 |
| 2 | Conn_01x02 | Connector_JST:JST_EH_S2B-EH_1x02_P2.50mm_Horizontal | J7, J8 |
| 2 | Keyswitch | ScottoKeebs_MX:MX_PCB_1.75u | S43, S68 |
| 2 | LED_Small | custom_leds:KBEELP4112P1R2363X4X5R18 | D86, D87 |
| 1 | 0.1 uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C8 |
| 1 | 0.1 uF / 35V | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C21 |
| 1 | 0.1 uF/35V | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C16 |
| 1 | 0.1uF/10V | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C25 |
| 1 | 0.1uF/35V | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3 |
| 1 | 0.1uF/6.3V | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C11 |
| 1 | 0.47 uF/6.3V | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C14 |
| 1 | 1 uH | customdcdcconverters:INDC3225X120N | L1 |
| 1 | 10 nF/10V | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C29 |
| 1 | 100k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4 |
| 1 | 100nF/6.3V | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C39 |
| 1 | 10K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 1 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5 |
| 1 | 10k | customdcdcconverters:THRMC1608X95N | TH1 |
| 1 | 113 kOhm | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R8 |
| 1 | 17kOhm | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R7 |
| 1 | 2.2 uF / 35V | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C17 |
| 1 | 2.2 uF/6.3V | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C36 |
| 1 | 22 uF 35V | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C23 |
| 1 | 22 uF/35V | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C22 |
| 1 | 220pF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C34 |
| 1 | 226 kOhm | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R9 |
| 1 | 22uF/35V | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2 |
| 1 | 22uF/6.3V | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C5 |
| 1 | 4.7 kOhm | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R11 |
| 1 | 500Ohm | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R12 |
| 1 | 5mOhm | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R10 |
| 1 | 89.25 kOhm | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R6 |
| 1 | BLM31SN500SZ | BLM31SN500SZ1L:BLM_ferritebead_6A_50Ohm | FB1 |
| 1 | CH340C | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U2 |
| 1 | Conn_01x10_Socket | Connector_PinHeader_1.00mm:PinHeader_1x10_P1.00mm_Vertical | J2 |
| 1 | ESP32-WROOM-32E | RF_Module:ESP32-WROOM-32D | U4 |
| 1 | Keyswitch | ScottoKeebs_MX:MX_PCB_2.00u | S27 |
| 1 | Keyswitch | ScottoKeebs_MX:MX_PCB_1.50u | S29 |
| 1 | Keyswitch | ScottoKeebs_MX:MX_PCB_6.25u | S74 |
| 1 | Keyswitch | ScottoKeebs_MX:MX_PCB_ISOEnter | S42 |
| 1 | MAX17055ETB+T | customdcdcconverters:SON40P250X200X80-11N | IC3 |
| 1 | MAX42410AFOA+T | customdcdcconverters:MAX42410AFOAT | IC2 |
| 1 | MAX77837EWA+T | customdcdcconverters:BGA8C40P4X2_181X100X69 | IC1 |
| 1 | MAX77986AEFD_T | customdcdcconverters:IC_MAX77986AEFD_T | U3 |
| 1 | MX_stab | marbastlib-mx:STAB_MX_ISO | S89 |
| 1 | MX_stab | marbastlib-mx:STAB_MX_2u | S90 |
| 1 | MX_stab | marbastlib-mx:STAB_MX_6.25u | S86 |
| 1 | OLED_128x64 | ScottoKeebs_Components:OLED_128x64 | J3 |
| 1 | Polyfuse_5A | Fuse:Fuse_1206_3216Metric_Pad1.42x1.75mm_HandSolder | F1 |
| 1 | SN74LV1T34DBV | Package_TO_SOT_SMD:SOT-23-5 | U6 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | U11 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_GCT_USB4085 | J1 |
| 1 | ~ | customdcdcconverters:COM-ZY12PDG | U1 |
The 341 most common of 342 parts.

Wh1teRabbitHU/indoor-bike-computer
It's a custom computer for indoor bikes to measure cadence, speed and power, store sessions, visualise ongoing statistics and replace non chargeable solutions

MrT-Stephens/Watchy-MrT-Stephens
This is my version of the Watchy by sqfmi and the website is "https://watchy.sqfmi.com".

Dheemanth0207/Electronic-Conference-Badge
This project investigates the design and development of a smart, energy-efficient electronic conference badge intended to replace traditional printed name tags used at events and meetings.



shazmeenShz/ESP32-Flight-Controller
Custom 4-layer IoT-Ready ESP32 Flight Controller PCB designed in KiCad 8 featuring USB Type-C, CH340C, MP1584 power management, MPU6050 interface, and manufacturing-ready Gerber files.

albertoboffi-PERSONAL/fra-clock
A one-off gift PCB designed in KiCad 10: an ESP32 clock with a ring of 180 WS2812B‑2020 LEDs, a photo printed in exposed copper on the front, two Makerverse 8 Ω / 5 W speakers driven by two MAX98357A I²S amplifiers…

KazimGL/ESP32-PowerIoT-DevBoard
ESP32 battery-powered IoT dev board with Li-ion charging, protection, and sensor support — designed in KiCad
It measures 362.5 × 166 mm and has 4 copper layers, 1.61 mm thick.
342 parts, built around the CH340C, ESP32-WROOM-32E, SN74LV1T34DBV and MAX77837EWA+T. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the camelone49/HishBoard_v1 repository on GitHub, at the commit this page was made from: the board is v4.kicad_pcb and its schematic LED_matrix.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask camelone49 before reusing the design.