
Arduino UNO R4 WiFi
sabogalc/KiCad-Arduino-Boards
A collection of Arduino boards recreated from scratch in KiCad. Legacy USB connectors have been replaced with USB-C where applicable.

A shield for the Arduino nano 33 IOT to shifts it's GPIO from 3.3v to 5v with an integrated HUB75 plug
LvL shifter shield is an open-source printed circuit board by CamelCaseName, from the CamelCaseName/Nano33IOTShield repository on GitHub, published under the MIT licence. It is a 4-layer board of 43.2 × 17.8 mm with 13 parts on 46 nets, routed with 354 tracks and 58 vias.
It is built around the TXB0108DQSR. Its parts include 4 connectors, 3 ICs, 2 capacitors, 1 resistor and 1 switch.
A shield for the Arduino nano 33 IOT to shifts it's GPIO from 3.3v to 5v with an integrated HUB75 plug
See the bill of materials for what to get.
The HUB75nano library will be updated to support this hat and arduino combination.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | Conn_01x15_Socket | Connector_PinSocket_2.54mm:PinSocket_1x15_P2.54mm_Vertical | J3, J4 |
| 2 | TXB0108DQSR | Package_SON:USON-20_2x4mm_P0.4mm | U1, U2 |
| 1 | 10u | Inductor_SMD:L_1008_2520Metric_Pad1.43x2.20mm_HandSolder | L1 |
| 1 | 10u | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1 |
| 1 | 22u | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C2 |
| 1 | Conn_02x08_Counter_Clockwise | Connector_PinSocket_2.54mm:PinSocket_2x08_P2.54mm_Vertical | J2 |
| 1 | LTC3525-5 | Package_TO_SOT_SMD:SOT-363_SC-70-6 | U3 |
| 1 | Power | Connector_JST:JST_EH_S2B-EH_1x02_P2.50mm_Horizontal | J1 |
| 1 | SW_DIP_x02 | Button_Switch_SMD:SW_DIP_SPSTx02_Slide_Copal_CHS-02A_W5.08mm_P1.27mm_JPin | SW1 |
| 1 | r=100k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1 |
The 12 most common of 13 parts.

sabogalc/KiCad-Arduino-Boards
A collection of Arduino boards recreated from scratch in KiCad. Legacy USB connectors have been replaced with USB-C where applicable.

macaba/TheManhattanToolkit
Input R - RNCF0603DTE10R0 (10 ohm) Input CM C - CGA3E1C0G2A472J080AC (4.7nF) Input DM C - DNP


upsidedownlabs/TXB0108
Upside Down Lab's TXB0108 8-Bit Bidirectional Voltage-Level Translator with Auto-Direction Sensing and ±15-kV ESD Protection.



Roshan-khatri78/Electronics-Projects-KiCad-
A collection of my KiCad projects and PCB designs. These projects reflect my learning journey in electronics and PCB design.

It measures 43.2 × 17.8 mm and has 4 copper layers, 1.6 mm thick.
13 parts, built around the TXB0108DQSR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the CamelCaseName/Nano33IOTShield repository on GitHub, at the commit this page was made from: the board is LvL_shifter_shield.kicad_pcb and its schematic LvL_shifter_shield.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).