4 layers45.5 × 18 mm
FDA A v1
macaba/TheManhattanToolkit
Input R - RNCF0603DTE10R0 (10 ohm) Input CM C - CGA3E1C0G2A472J080AC (4.7nF) Input DM C - DNP
52 parts94MIT
6 layers35.5 × 35.5 mm
ADC A v1
macaba/TheManhattanToolkit94Input R - RNCF0603DTE10R0 (10 ohm) Input CM C - CGA3E1C0G2A472J080AC (4.7nF) Input DM C - DNP
- Size
- 35.5 × 35.5 mm
- Copper layers
- 6
- Thickness
- 1.66 mm
- Parts
- 55
- Nets
- 51
- Pads
- 185
- Tracks, vias
- 307, 65
- Pours
- 7
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 28 Jan 2023
- Updated
- 24 Feb 2026
Overview
ADC A v1 is an open-source printed circuit board by macaba, from the macaba/TheManhattanToolkit repository on GitHub, published under the MIT licence. It is a 6-layer board of 35.5 × 35.5 mm with 55 parts on 51 nets, routed with 307 tracks and 65 vias.
It is built around the AD4630-24BBCZ and TXB0108DQSR. Its parts include 14 capacitors, 8 resistors and 4 ICs.
Main components
2
AD4630-24BBCZ
BGA-64-40℃~+125℃ 0.5LSB 1.71V~1.89V、5.3V~5.5V 105.7dB 2 24 2MHz 500uA 80MHz Built-in Built-in Not supported SAR SPI Simultaneous sampling Yes BGA-64 Analog to Digital Converters (ADC) ROHSAnalog DevicesUncategorised
TXB0108DQSR
SON-20(2x4)-40℃~+85℃ 1.2V~3.6V 1.65V~5.5V 100Mbps Bidirectional Decoupling、Auto Direction Detection、Power-Off Protection Tri-State SON-20(2x4) Translators, Level Shifters ROHSTexas InstrumentsTranslators, Level Shifters
README
source/application specific/ADC-A-v1/README.mdADC-A-v1
AD4630-24 ADC with supporting components.
Components
Input R - RNCF0603DTE10R0 (10 ohm)
Input CM C - CGA3E1C0G2A472J080AC (4.7nF)
Input DM C - DNP
Parts
55| Qty | Value | Footprint | References |
|---|---|---|---|
| 25 | PIN | TestPoint:TestPoint_Pad_2.0x2.0mm | TP10, TP11, TP12, TP13, TP14, TP15, TP16, TP17, TP18, TP19, TP20, TP21, TP22, TP23, TP24, TP25 +9 |
| 7 | R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2, R4, R29, R30, R31, R32 |
| 4 | 100nF | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | C10, C11, C12, C15 |
| 4 | CC | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | C3, C4, C7, C8 |
| 2 | CD | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | C6, C9 |
| 2 | TXB0108DQSR | TXB0108PWR:SOP65P640X120-20N | U2, U3 |
| 1 | 100R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3 |
| 1 | 10uF | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | C16 |
| 1 | 10uF | Capacitor_SMD:C_1812_4532Metric_Pad1.57x3.40mm_HandSolder | C5 |
| 1 | 1nF | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | C13 |
| 1 | 1uF | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | C14 |
| 1 | AD4630-24BBCZ | AD4630:AD4630-24BBCZ | U1 |
| 1 | IN0+ | TestPoint:TestPoint_Pad_2.0x2.0mm | TP1 |
| 1 | IN0- | TestPoint:TestPoint_Pad_2.0x2.0mm | TP2 |
| 1 | IN1+ | TestPoint:TestPoint_Pad_2.0x2.0mm | TP3 |
| 1 | IN1- | TestPoint:TestPoint_Pad_2.0x2.0mm | TP4 |
| 1 | MCP1725-1802E_SN | MCP1725-1802:SOIC127P600X175-8N | IC1 |
More from macaba/TheManhattanToolkit
4- 6 layers32 × 20 mm
LPF A v1
macaba/TheManhattanToolkit
Input R - RNCF0603DTE10R0 (10 ohm) Input CM C - CGA3E1C0G2A472J080AC (4.7nF) Input DM C - DNP
36 parts94MIT - 4 layers20.5 × 10.5 mm
ADC B v1
macaba/TheManhattanToolkit
Input R - RNCF0603DTE10R0 (10 ohm) Input CM C - CGA3E1C0G2A472J080AC (4.7nF) Input DM C - DNP
20 parts94MIT - 2 layers20.5 × 10.5 mm
LDO A v1
macaba/TheManhattanToolkit
Input R - RNCF0603DTE10R0 (10 ohm) Input CM C - CGA3E1C0G2A472J080AC (4.7nF) Input DM C - DNP
9 parts94MIT
Similar boards
- 4 layers50 × 70 mm
AD4630 breakout
mfkiwl/AD4630-Wideband-Digital-LNA
AD4630-based 2MSPS high resolution sampler
36 partsMIT - 4 layers68.6 × 53.3 mm
Arduino UNO R4 WiFi
sabogalc/KiCad-Arduino-Boards
A collection of Arduino boards recreated from scratch in KiCad. Legacy USB connectors have been replaced with USB-C where applicable.
262 parts95WTFPL - 2 layers100 × 100 mm
- 2 layers13.7 × 26.4 mm
TXB0108DQSR breakout
upsidedownlabs/TXB0108
Upside Down Lab's TXB0108 8-Bit Bidirectional Voltage-Level Translator with Auto-Direction Sensing and ±15-kV ESD Protection.
8 parts12MIT - 2 layers78 × 40 mm
- 2 layers146.6 × 113.5 mm
- 2 layers
FMCW Radar
Roshan-khatri78/Electronics-Projects-KiCad-
A collection of my KiCad projects and PCB designs. These projects reflect my learning journey in electronics and PCB design.
228 parts2 - 2 layers65 × 58 mm
Questions
How big is the ADC A v1 PCB?
It measures 35.5 × 35.5 mm and has 6 copper layers, 1.66 mm thick.
What parts does the ADC A v1 use?
55 parts, built around the AD4630-24BBCZ and TXB0108DQSR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ADC A v1 KiCad files?
From the macaba/TheManhattanToolkit repository on GitHub, at the commit this page was made from: the board is source/application specific/ADC-A-v1/ADC-A-v1.kicad_pcb and its schematic source/application specific/ADC-A-v1/ADC-A-v1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the ADC A v1 design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).