

Kicad tsuru
STM version of the tsuru keyboard
- Size
- 207.8 × 57.2 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 84
- Nets
- 87
- Pads
- 529
- Tracks, vias
- 829, 88
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 2 Mar 2024
- Updated
- 5 Mar 2025
Overview
Kicad tsuru is an open-source printed circuit board by calvin-mcd, from the calvin-mcd/tsuru-STM repository on GitHub, published under the CERN-OHL-S-2.0 licence. It is a 2-layer board of 207.8 × 57.2 mm with 84 parts on 87 nets, routed with 829 tracks and 88 vias.
It is built around the AP2112K-3.3, PRTR5V0U2X and SK6812, with the SKQGABE010 among its other parts. Its parts include 21 diodes, 8 capacitors, 4 resistors, 4 switches and 3 ICs. It belongs with the keyboards and input boards and the STM32 boards of this library.
Main components
4AP2112K-3.3
SOT253.3V 600mA CMOS Low Dropout Linear Regulator with EnableDiodes IncorporatedUncategorisedPRTR5V0U2X
SOT-143-55℃~+125℃ 0.3pF、0.8pF 100W 10V、15V 5V 6.5V 6A 80nA ESD IEC 61000-4-2、IEC 61000-4-5、IEC 61000-4-4 Three channels Unidirectional SOT-143 ESD and Surge Protection (TVS/ESD) ROHSTECH PUBLICESD And Surge Protection (TVS/ESD)SK6812
SMD-4P,5.4x5mm-40℃~+85℃ 0.6mA 1.6mm 120° 160mcd~320mcd 1kHz 2000V 280mcd~515mcd 3.7V~5.5V 460nm~470nm 520nm~530nm 620nm~625nm 800Kbit/s 815mcd~1275mcd Built-in power-on reset circuit Semi-transparent lens SMD-4P,5.4x5mm RGB LEDs(Built-in IC) ROHSOPSCO OptoelectronicsRGB LEDs(Built-In IC)SKQGABE010
SMD-4P,5.2x5.2mm-40℃~+90℃ 1,000,000 cycles 1.5mm 1.6N 12V 5.2mm 5.2mm 50mA Round Button SPST-NO Surface Mount,Vertical SMD-4P,5.2x5.2mm Tactile Switches ROHSALPSALPINETactile Switches
README
README.md鶴の恩返し (Tsuru No Ongaeshi) STM
This is a version of apfel's aka kilipan's cute lil 3-row, katana-staggered keyboard with ISO-Enter compatibility that uses the cheaper, albeit not quite as handsolder friendly STM32f072 to support qmk and vial. It also sports optional underglow which requires you to handsolder the leds and bridge the rgb jumperpad to activate.
the OG board can be found here link!!!
Layout
Images

Disclaimer
This PCB has been fully tested and is confirmed to work. However, no-one involved in this project is responsible for any usage issues that may arise. Order at your own risk. Feel free to edit, modify and otherwise utilise these files.
License
All files are provided under CERN-OHL-S license. Feel free to build your own!
Credits
Thank you to Apfel for this awesome, odd litte board! Any questions, contact Calvin0563 on Discord.
Parts
84| Qty | Value | Footprint | References |
|---|---|---|---|
| 32 | MX_SW_HS | apfellib:MX-HotswapSAFE_no_silk | MX1, MX2, MX10, MX11, MX12, MX13, MX14, MX15, MX16, MX17, MX18, MX19, MX20, MX21, MX22, MX23 +16 |
| 15 | BAV70_Small | BeiBob:apfel_SOT-23_silkless | D1, D2, D3, D4, D5, D6, D7, D8, D9, D10, D11, D12, D13, D14, D15 |
| 6 | 100nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C4, C5, C6, C7, C8, C10 |
| 6 | SK6812 | LED_SMD:LED_SK6812_PLCC4_5.0x5.0mm_P3.2mm | D16, D17, D18, D19, D20, D21 |
| 4 | MountingHole_Pad | BeiBob:MountingHole_2.2mm_M2_Pad_Via_nosilk | H1, H2, H3, H4 |
| 3 | LOGO | LOGO | G***, G***, tsuru |
| 2 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3, R4 |
| 2 | 5.1k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2 |
| 1 | 10uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C9 |
| 1 | 1nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1 |
| 1 | 500mA | Fuse:Fuse_1206_3216Metric_Pad1.42x1.75mm_HandSolder | F2 |
| 1 | AP2112K-3.3 | Package_TO_SOT_SMD:SOT-23-5_HandSoldering | U2 |
| 1 | Conn_01x05_Pin | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J3 |
| 1 | Conn_ARM_SWD_TagConnect_TC2030-NL | Connector:Tag-Connect_TC2030-IDC-NL_2x03_P1.27mm_Vertical | J2 |
| 1 | MX_stab | PCM_marbastlib-mx:STAB_MX_ISO-ROT | S2 |
| 1 | MX_stab | PCM_marbastlib-mx:STAB_MX_P_3u | S1 |
| 1 | PRTR5V0U2X | Package_TO_SOT_SMD:SOT-143_Handsoldering | U1 |
| 1 | RotaryEncoder_Switch | apfellib:ROT_Alps_EC11E-Switch_noMP_nosilk | SW1 |
| 1 | SKQGABE010 | Button_Switch_SMD:SW_Push_SPST_NO_Alps_SKRK | SW3 |
| 1 | STM32F072C8Tx | Package_QFP:LQFP-48_7x7mm_P0.5mm | U3 |
| 1 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1 |
| 1 | USB_C_Receptacle_USB2.0 | samd21pad:USB_C_Receptacle_GT-USB-7010 | J1 |
Similar boards
- 2 layers242.9 × 95.3 mm

- 2 layers227.9 × 65.3 mm

- 2 layers242.4 × 75.7 mm

- 4 layers227.3 × 85 mm

Le capybara
sporkus/le_capybara_keyboard
Capactive sensing (EC) pcb for Le Chiffre keyboard
118 parts58CERN-OHL-W-2.0 - 2 layers227.3 × 84.9 mm

Stm32 hotswap chiffre
sporkus/le_chiffre_keyboard_stm32
Le Chiffre keyboard pcb with stm32F072
110 parts53CERN-OHL-W-2.0 - 2 layers209.7 × 76.4 mm

Hhkb universal
calvin-mcd/universal-vault
pcb for the vault35 covering all sorts of layout options
216 parts20GPL-3.0 - 2 layers209.7 × 76.3 mm

- 2 layers241.3 × 74.6 mm

Cursed scandinavian iso van
Ciantha/cursed-scandinavian-iso-van
first "original" pcb, let's see how this goes
106 parts5
Questions
How big is the Kicad tsuru PCB?
It measures 207.8 × 57.2 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Kicad tsuru use?
84 parts, built around the AP2112K-3.3, PRTR5V0U2X, SK6812 and SKQGABE010. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Kicad tsuru KiCad files?
From the calvin-mcd/tsuru-STM repository on GitHub, at the commit this page was made from: the board is Project/kicad_pcb/kicad_tsuru.kicad_pcb and its schematic Project/kicad_pcb/kicad_tsuru.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Kicad tsuru design in my own project?
Its repository publishes it under the CERN-OHL-S-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).