
Panel
calithameridi/corevus
High-flexibility, low-cost mechatronics controller for 3D printers

High-flexibility, low-cost mechatronics controller for 3D printers
Corevus toolboard is an open-source printed circuit board by calithameridi, from the calithameridi/corevus repository on GitHub. It is a 4-layer board of 49.8 × 25.5 mm with 84 parts on 73 nets, routed with 656 tracks and 183 vias.
It is built around the STM32G431KBU3, UCC27517DBV and LIS2DE12, with the SPX3819M5-L-3-3, TMC2209-LA and TPS2069CDBV among its other parts. Its parts include 28 capacitors, 20 resistors, 10 connectors, 7 ICs and 5 diodes. It belongs with the STM32 boards of this library.
Copyright 2024 by meridi (myself), all rights reserved until I decide on a suitable license
Corevus-G v0.6 printer mainboards are available for evaluation and beta testing. Join the discord:
discord (dot) gg (slash) W 5 m a f w 2 k Y h. See the Corevus-G v0.6 manual here for more information.
High performance, low-ish price control board for 3D printers.

(For older hardware releases, also see the CvG v0.4 manual)
| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 1µF | AlphaLib:0402C | C1, C4, C5, C6, C11, C12, C13, C26, C34 |
| 4 | 10µF 50V | Capacitor_SMD:C_1206_3216Metric | C14, C15, C16, C17 |
| 4 | 2.2kΩ | AlphaLib:0402R | R8, R13, R17, R21 |
| 4 | 470pF | AlphaLib:0402C | C18, C19, C20, C21 |
| 3 | 4.7kΩ | AlphaLib:0402R | R1, R7, R16 |
| 3 | XH 1x2P | corevus:JST_XH_1x02 | J5, J6, J7 |
| 2 | 100mΩ | Resistor_SMD:R_0805_2012Metric | R5, R6 |
| 2 | 10kΩ | AlphaLib:0402R | R14, R19 |
| 2 | 10kΩ 3950K | AlphaLib:0402R | TH1, TH2 |
| 2 | 10pF | AlphaLib:0402C | C2, C3 |
| 2 | 33Ω | AlphaLib:0402R | R3, R4 |
| 2 | M2 Standoff | corevus:Sinhoo_TH162010 | H3, H4 |
| 2 | M3 Hole | corevus:MountingHole_M3_Driver_Corner | H1, H2 |
| 2 | XH 1x3P | corevus:JST_XH_1x03 | J2, J9 |
| 1 | 0Ω | AlphaLib:0402R | R9 |
| 1 | 100kΩ | AlphaLib:0402R | R2 |
| 1 | 100nF | AlphaLib:0402C | C7 |
| 1 | 100nF 16V | AlphaLib:0402C | C8 |
| 1 | 100nF 25V | AlphaLib:0402C | C29 |
| 1 | 100nF 50V | AlphaLib:0402C | C23 |
| 1 | 10nF | AlphaLib:0402C | C31 |
| 1 | 10µF | Capacitor_SMD:C_0805_2012Metric | C33 |
| 1 | 10µF 25V | Capacitor_SMD:C_0805_2012Metric | C32 |
| 1 | 10µH | corevus:L_Changjiang_FTC2520 | L1 |
| 1 | 150kΩ | AlphaLib:0402R | R11 |
| 1 | 1kΩ | AlphaLib:0402R | R12 |
| 1 | 1x3P | corevus:PinHeader_1x03_P2.54mm_Vertical | J10 |
| 1 | 1x8P | corevus:PinHeader_1x08_P2.54mm_Vertical | J8 |
| 1 | 20kΩ | AlphaLib:0402R | R10 |
| 1 | 22nF 50V | AlphaLib:0402C | C9 |
| 1 | 4148 | corevus:D_SOD-323 | D1 |
| 1 | 510kΩ | AlphaLib:0402R | R20 |
| 1 | 51Ω | AlphaLib:0402R | R15 |
| 1 | 68pF | AlphaLib:0402C | C28 |
| 1 | AO3400 | Package_TO_SOT_SMD:SOT-23 | Q4 |
| 1 | GZ1005 | AlphaLib:0402 | FB1 |
| 1 | Grn | PCM_ME_passives:0603LED | D3 |
| 1 | Jumper_2_Small_Open | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1 |
| 1 | LIS2DE12 | Package_LGA:LGA-12_2x2mm_P0.5mm | U1 |
| 1 | MF3 1x2P | corevus:Molex_Micro-Fit-3.0_436500215 | J1 |
| 1 | MX3.0 2x4P | corevus:XKB_X3025WRS-2x04E | J3 |
| 1 | NMOS | corevus:MOSFET_DFN8 | Q2 |
| 1 | NetTie_2 | corevus:NetTie-2_SMD_Pad0.1mm | NT1 |
| 1 | Red | PCM_ME_passives:0603LED | D2 |
| 1 | Reset | corevus:ShouHan_TS24CA | SW1 |
| 1 | SPX3819M5-L-3-3 | Package_TO_SOT_SMD:SOT-23-5 | U6 |
| 1 | STM32G431KBU3 | Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.45x3.45mm | U3 |
| 1 | TMC2209-LA | Package_DFN_QFN:TQFN-28-1EP_5x5mm_P0.5mm_EP3.25x3.25mm_ThermalVias | U4 |
| 1 | TPS2069CDBV | Package_TO_SOT_SMD:SOT-23-5 | U7 |
| 1 | TPS54302 | Package_TO_SOT_SMD:SOT-23-6 | U2 |
| 1 | UCC27517 | Package_TO_SOT_SMD:SOT-23-5 | U8 |
| 1 | Wht | PCM_ME_passives:0603LED | D4 |
| 1 | XH 1x4P | corevus:JST_XH_1x04-Side | J4 |
| 1 | XRCGB25 | Crystal:Crystal_SMD_2016-4Pin_2.0x1.6mm | Y1 |
| 1 | Ylw | PCM_ME_passives:0603LED | D5 |

calithameridi/corevus
High-flexibility, low-cost mechatronics controller for 3D printers

calithameridi/corevus
High-flexibility, low-cost mechatronics controller for 3D printers

calithameridi/corevus
High-flexibility, low-cost mechatronics controller for 3D printers

calithameridi/corevus
High-flexibility, low-cost mechatronics controller for 3D printers

calithameridi/corevus
High-flexibility, low-cost mechatronics controller for 3D printers

calithameridi/corevus
High-flexibility, low-cost mechatronics controller for 3D printers

calithameridi/corevus
High-flexibility, low-cost mechatronics controller for 3D printers

calithameridi/corevus
High-flexibility, low-cost mechatronics controller for 3D printers

calithameridi/corevus
High-flexibility, low-cost mechatronics controller for 3D printers

calithameridi/corevus
High-flexibility, low-cost mechatronics controller for 3D printers

calithameridi/corevus
High-flexibility, low-cost mechatronics controller for 3D printers

calithameridi/corevus
High-flexibility, low-cost mechatronics controller for 3D printers

DevCyclonekitten/Bambu-A1-Klipper
A repository about the development of modifying a bambu labs a1 printer to run on klipper


entropia/Teebeutel-Hardware
Teebeutel (eng. Teabag) is an electronic, Entropia themed con-badge for the GPN20, featuring an ESP32 microprocessor running micropython.


marsairforce/breakout_boards
Small circuit boards to assist with breadboard prototyping with SMD packages.

Janky-Jingle-Crew/SouthPoleLevitator
2025 Christmas card "South Pole Levitator"

Asapgiri/kbb-keyboard
Keep in mind, that first the Atmega32u4 will need a bootloader, witch is programmed trough the bootloader pins. We had to program it with an Esp32-C3-mini, witches Arduino ISA codes I will upload here under the folder…

It measures 49.8 × 25.5 mm and has 4 copper layers, 1.6 mm thick.
84 parts, built around the STM32G431KBU3, UCC27517DBV, LIS2DE12 and SPX3819M5-L-3-3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the calithameridi/corevus repository on GitHub, at the commit this page was made from: the board is hardware/corevus-toolboard/corevus-toolboard.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask calithameridi before reusing the design.