Skip to the content
2 layers63.5 × 78.1 mmHSMC GPIO kicad, the printed circuit board in 3D

This is a project created to test my new HSMC Card KiCad footprints. It is based loosely on the Terasis HSTC-GPIO Card. In small quantities, the cost is comparable to the HSTC-GPIO Card.

Size
63.5 × 78.1 mm
Copper layers
2
Thickness
1.6 mm
Parts
114
Nets
168
Pads
518
Tracks, vias
705, 289
Pours
7
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
16 Jan 2019
Updated
16 Jan 2019

Overview

HSMC GPIO kicad is an open-source printed circuit board by calebreister, from the calebreister/HSMC-GPIO-kicad repository on GitHub. It is a 2-layer board of 63.5 × 78.1 mm with 114 parts on 168 nets, routed with 705 tracks and 289 vias.

It is built around the PCA9507D and BAT54S. Its parts include 44 resistors, 42 diodes, 20 capacitors, 4 connectors and 2 ICs.

Main components

2

README

README.md

HSMC-GPIO-kicad

This is a project created to test my new HSMC Card KiCad footprints. It is based loosely on the Terasis HSTC-GPIO Card. In small quantities, the cost is comparable to the HSTC-GPIO Card.

Features

  • 40 GPIO pins
  • Protection diodes and series resistors
  • Power supply terminals
  • Buffered I2C port with selectable voltage

License

Creative Commons License
HSMC-GPIO-kicad by Caleb Reister is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Pictures

Assembled PCB

PCB Top

PCB Bottom

PCB Attached to an FPGA board

40-pin ribbon cable

Parts

114
QtyValueFootprintReferences
4050Resistor_SMD:R_0603_1608MetricR1, R2, R10, R11, R12, R13, R14, R15, R16, R17, R18, R19, R20, R21, R22, R23 +24
40BAT54SPackage_TO_SOT_SMD:SOT-323_SC-70D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +24
15100nCapacitor_SMD:C_0805_2012MetricC1, C2, C3, C4, C5, C6, C7, C8, C9, C10, C11, C12, C13, C14, C15
510uCapacitor_Tantalum_SMD:CP_EIA-3528-21_Kemet-BC16, C17, C18, C19, C20
210kResistor_SMD:R_0603_1608MetricR41, R42
22kResistor_SMD:R_0603_1608MetricR43, R44
2BAT54SPackage_TO_SOT_SMD:SOT-23D41, D42
1Conn_02x20_Odd_EvenConnector_IDC:IDC-Header_2x20_P2.54mm_VerticalJ1
1HSMC_Card_QTHConnector_Samtec:Samtec_HSMC_Card_QTH-090-01-x-D-A_3.076x0.932in_P0.5mm_VerticalJ2
1I2CConnector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ3
1Jumper_3_Bridged12Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJP1
1Logo_Open_Hardware_SmallSymbol:OSHW-Symbol_6.7x6mm_SilkScreenLOGO1
1MC78M05_TO252Package_TO_SOT_SMD:TO-252-2U1
1PCA9507Package_SO:SOIC-8_3.9x4.9mm_P1.27mmU2
1Screw_Terminal_01x04TerminalBlock:TerminalBlock_bornier-4_P5.08mmJ4

Similar boards

  • 2 layers58.2 × 38.1 mmUsb sniffer, the printed circuit board in 3D

    Usb sniffer

    ataradov/usb-sniffer

    Low-cost LS/FS/HS USB sniffer with Wireshark interface

    87 parts1.3kBSD-3-Clause
  • 4 layers94.4 × 72.8 mmRP2040 base, the printed circuit board in 3D

    RP2040 base

    Twisted-Fields/rp2040-motor-controller

    A dual channel brushless motor controller based on the RP2040 microcontroller, designed in Kicad.

    325 parts419
  • 4 layers72.4 × 95.3 mmDingoPDM, the printed circuit board in 3D

    DingoPDM

    corygrant/dingoPDM

    Hardware - dingoPDM is an open source, affordable automotive PDM (Power Distribution Module). Pre-assembled and tested units are available or the design can be used to build a DIY version.

    156 parts128MIT
  • 2 layers100 × 99.8 mmUnderdog, the printed circuit board in 3D

    Underdog

    turboedge/SpeedyBoards

    EMS boards powered by Speeduino

    396 parts110GPL-2.0
  • 6 layers203 × 151.8 mmPDNode Baseboard, the printed circuit board in 3D

    PDNode Baseboard

    DvidMakesThings/HW_PDNode-600-Pro

    The PDNode-600 is a professional-grade, 600W USB Power Delivery Unit designed specifically for compact 10-inch rack systems, targeting embedded developers, homelab enthusiasts, test benches, and smart infrastructure.

    236 parts86AGPL-3.0
  • 6 layers71.5 × 63.6 mmSensorboard, the printed circuit board in 3D

    Sensorboard

    CameraNexus/sitina1

    Open-source 35mm full-frame (36mm x 24mm) CCD mirror-less interchangable lens camera (MILC). The original goal of this project was to create a digital camera back to convert SLR cameras to DSLR cameras, but has since…

    426 parts82MIT
  • 2 layers248.9 × 120.7 mm16nx, the printed circuit board in 3D

    16nx

    16n-faderbank/16nx

    16nx is a controller for musical instruments. Sixteen faders,MIDI over USB and jack, CV out, and I2C out. Based around RP2040.

    171 parts76
  • 4 layers137 × 79.5 mmTGX4, the printed circuit board in 3D

    TGX4

    hexeguitar/TGX4

    Teensy 4 based guitar amp emulator

    297 parts66

Questions

How big is the HSMC GPIO kicad PCB?

It measures 63.5 × 78.1 mm and has 2 copper layers, 1.6 mm thick.

What parts does the HSMC GPIO kicad use?

114 parts, built around the PCA9507D and BAT54S. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the HSMC GPIO kicad KiCad files?

From the calebreister/HSMC-GPIO-kicad repository on GitHub, at the commit this page was made from: the board is HSMC-GPIO-kicad.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the HSMC GPIO kicad design in my own project?

Its repository states no licence, so its author keeps all rights: ask calebreister before reusing the design.