

Crw-031
PCBs made by me
- Size
- 18.3 × 47 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 38
- Nets
- 53
- Pads
- 207
- Tracks, vias
- 402, 48
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 11 Dec 2023
- Updated
- 29 Jun 2025
Overview
Crw-031 is an open-source printed circuit board by caitlynrw, from the caitlynrw/crw-pcbs repository on GitHub. It is a 4-layer board of 18.3 × 47 mm with 38 parts on 53 nets, routed with 402 tracks and 48 vias.
It is built around the USBLC6-2SC6. Its parts include 11 capacitors, 9 resistors, 5 diodes, 4 ICs and 4 connectors. It belongs with the PIC boards of this library.
Main components
1README
README.mdCRW PCBs
Collection of random PCBs that I've made but aren't connected to any sort of big project.
Schematics and PCBs designed in KiCAD
These designs are provided as is and I take no responsibility if it breaks anything in real life. I am not a qualified electronic engineer (yet...)
| PCB | Description |
|---|---|
| CRW001 | USB-C FT230X Adapter (WIP) |
| CRW002 | LED 'bar graph' (actual ones are annoying to buy for some reason) |
| CRW003 | TQFP PIC32MX100/200D breakout board (silkscreen for 200 series) (WIP) |
| CRW004 | QFN PIC32MX100/200D breakout board (silkscreen for 200 series) |
| CRW005 | ATtiny4/5/9/10 breakout board with capacitor (silkscreen for tinyWS) |
| CRW006 | USB-C USBasp board (WIP) |
| CRW008 | Microchip ICD to PICKit board |
| CRW009 | USB-C DMX512 Adapter |
| CRW011 | Ender 3 ATMega Control board |
| CRW012 | Raspberry Pi hat for extra IO |
| CRW013 | USB-UART wireless dongle |
| CRW015 | tinyWS dev board |
| CRW016 | Voice ring modulator |
| CRW017 | Framework UART module |
| CRW021 | Framework Oscilloscope module |
| CRW022 | mikroBUS dual 7-segment display module |
| CRW023 | Framework RS232 module |
| CRW024 | Framework keyboard breakout |
| CRW025 | Framework USB-C-C Module |
| CRW026 | PIC32MX100/200 mikroBUS CTMU Slider |
| CRW027 | PIC32MX100/200 mikroBUS CTMU Button |
| CRW028 | RISC-V-based Arduino board |
| CRW029 | UART to RS232 Adapter for my openWRT router |
| CRW030 | mikroBUS DMX Adapter |
| CRW031 | Flinduino Mini |
| CRW032 | Flinduino Analog Shield - SMD |
| CRW033 | Motor Control board mikroBUS adapter |
| CRW034 | mikroBUS OLED display adapter |
| CRW035 | ?? |
| CRW036 | Flinduino Hexapod Shield |
| CRW037 | Flinduino EXP breakout |
| CRW038 | Flinduino V2.1 |
| CRW039 | Framework USB dongle card |
| CRW040 | Motor Control Board |
| CRW041 | VGA Latch Shield |
| CRW042 | Flinduino Flipper |
| CRW043 | PIC18 Trainer |
| CRW044 | ATX2Xbox redraw |
| CRW045 | Flinduino I/O Shield |
| CRW046 | I2C Analog Temp. module breakout |
| CRW047 | PCB ID Prototype |
| CRW048 | Mini Theromoetre |
| CRW049 | Framework picoAVR Programmer |
| CRW050 | mikroBUS RS232 Board |
| CRW051 | ICSP Standalone Programmer |
| CRW052 | picodityJTAG Board |
| CRW053 | SPI LED Matrix |
| CRW054 | Multiplexed LED Matrix |
| CRW055 | WS2812B Matrix |
| CRW056 | Framework PD-PSU Module |
| CRW057 | Motor Control Shield |
| CRW058 | DRV Breakout |
| CRW059 | Arduino Sensor shield |
| CRW060 | USB C PD sink board |
| CRW061 | USB-C UART breakout |
| CRW062 | CM4/5 Mobo |
| CRW063 | USB to Hub + NvME |
| CRW064 | Flinduino PLC Shield |
| CRW065 | mikroBUS Encoder |
| CRW066 | Random RS232 thingy |
| CRW067 | USB251* Hub board for FW Devlopment |
| CRW070 | AVR ISP programmed based on USB -> SPI chip |
| CRW071 | Flinduino Mini |
| CRW072 | 3D Printer Control Board |
| CRW073 | USB-C Power Sink |
| CRW074 | Ender 3 'LCD' I/O Card |
| CRW075 | Klipper Expander redraw with connectors |
| CRW076 | V-Slot LED for Ender 3 |
| CRW077 | Neopixel Dev Board |
| CRW078 | LPC-duino |
| CRW079 | Flinduino Sensor Shield |
| CRW080 | FW Volume Buttons ECard |
| CRW081 | Flinduino Connector Shield |
| CRW082 | Oximeter Dev Board |
| CRW083 | FW FPGA ECard |
| CRW084 | Modern ATtiny bad USB |
| CRW085 | ESPHome Ceiling Fan LED panel replacement |
| CRW086 | ESPHome Envirnoment Monitor |
| CRW087 | Raspberry Pi Pico Arduino Breakout |
| CRW088 | ESP01 to FTDI Board |
Parts
38| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 100nF | Capacitor_SMD:C_0603_1608Metric | C2, C3, C4, C5, C8 |
| 3 | 10k | Resistor_SMD:R_0603_1608Metric | R5, R7, R8 |
| 3 | 10uF | Capacitor_SMD:C_0603_1608Metric | C1, C10, C11 |
| 3 | 200R | Resistor_SMD:R_0603_1608Metric | R3, R4, R9 |
| 2 | 27pF | Capacitor_SMD:C_0603_1608Metric | C6, C7 |
| 2 | 5.1k | Resistor_SMD:R_0603_1608Metric | R1, R2 |
| 1 | 1k | Resistor_SMD:R_0603_1608Metric | R6 |
| 1 | 2.2uF | Capacitor_SMD:C_0603_1608Metric | C9 |
| 1 | 500mA | Fuse:Fuse_1812_4532Metric | F1 |
| 1 | 8MHz | Crystal:Crystal_SMD_0603-4Pin_6.0x3.5mm | Y1 |
| 1 | BOOT | Button_Switch_SMD:SW_SPST_PTS647_Sx50 | SW1 |
| 1 | L | Connector_PinHeader_2.54mm:PinHeader_1x16_P2.54mm_Vertical | J2 |
| 1 | LED1 | LED_SMD:LED_0603_1608Metric | D3 |
| 1 | LED2 | LED_SMD:LED_0603_1608Metric | D2 |
| 1 | MCP1703Ax-330xxTT | Package_TO_SOT_SMD:SOT-23 | U4 |
| 1 | MCP1703Ax-500xxDB | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U3 |
| 1 | PIC32MX250F128D-IPT | Package_DFN_QFN:QFN-44-1EP_8x8mm_P0.65mm_EP6.45x6.45mm | U1 |
| 1 | PICKIT | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J1 |
| 1 | PWR_LED | LED_SMD:LED_0603_1608Metric | D5 |
| 1 | R | Connector_PinHeader_2.54mm:PinHeader_1x16_P2.54mm_Vertical | J3 |
| 1 | RESET | Button_Switch_SMD:SW_SPST_PTS647_Sx50 | SW2 |
| 1 | SS1P3L | Diode_SMD:Vishay_SMPA | D1 |
| 1 | TVS | Diode_SMD:D_SOD-323F | D4 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | U2 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J4 |
The 37 most common of 38 parts.
More from caitlynrw/crw-pcbs
5- 2 layers22.9 × 15.2 mm

- 2 layers53.8 × 36.1 mm

- 2 layers15.2 × 10.2 mm

- 2 layers58.4 × 20.3 mm

- 2 layers16.5 × 16.5 mm

Similar boards
- 4 layers16.9 × 119.4 mm

- 2 layers290.1 × 130 mm

- 4 layers95 × 55.5 mm

EinkPDA keyboard
TalismanDesign/PocketMage_PDA
An E-Ink PDA device using the ESP32 S3.
137 parts2kApache-2.0 - 4 layers299 × 127 mm

- 2 layers42 × 67 mm

- 2 layers134 × 88 mm

Tulipcc
shorepine/tulipcc
The Tulip Creative Computer and AMYboard - portable Python synthesizers
103 parts978 - 4 layers70.8 × 108 mm

- 4 layers28.2 × 26.1 mm

DongleHiderPlus PCB
LeoDJ/FW-EC-DongleHiderPlus
Framework Expansion Card that includes a USB hub to hide a bare dongle inside and still have a USB-A port externally
23 parts497CERN-OHL-W-2.0
Questions
How big is the Crw-031 PCB?
It measures 18.3 × 47 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Crw-031 use?
38 parts, built around the USBLC6-2SC6. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Crw-031 KiCad files?
From the caitlynrw/crw-pcbs repository on GitHub, at the commit this page was made from: the board is crw-031/crw-031.kicad_pcb and its schematic crw-002/crw-002.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Crw-031 design in my own project?
Its repository states no licence, so its author keeps all rights: ask caitlynrw before reusing the design.