

Line usb master
Serial messaging protocol
- Size
- 79.5 × 50 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 111
- Nets
- 99
- Pads
- 338
- Tracks, vias
- 663, 287
- Pours
- 379
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 12 Nov 2023
- Updated
- 18 Aug 2026
Overview
Line usb master is an open-source printed circuit board by c4deszes, from the c4deszes/bike-line-protocol repository on GitHub. It is a 2-layer board of 79.5 × 50 mm with 111 parts on 99 nets, routed with 663 tracks and 287 vias.
It is built around the MCP2003-E/P, 74HCT595D and FT4232HL, with the TPS61085, B140-13-F(MS) and TVCM17015BPB among its other parts. Its parts include 32 resistors, 31 capacitors, 11 diodes, 8 connectors and 7 ICs.
Main components
6MCP2003-E/P
PDIP-8-40℃~+125℃ 175mV 6V~27V Transceiver PDIP-8 LIN Transceivers ROHSMicrochip TechnologyLIN Transceivers74HCT595D
SOIC-16-40℃~+125℃ 1 25ns@4.5V,50pF 30MHz 4.5V~5.5V 500mW 6mA 74HCT 8 Serial-to-Serial or Parallel Tri-State SOIC-16 Shift Registers ROHSNexperiaShift RegistersFT4232HL
QFP64Quad High Speed USB to Multipurpose UART/MPSSE ICFTDIUncategorisedTPS61085
UncategorisedTexas InstrumentsB140-13-F(MS)
SMASchottky DiodesMSKSEMITVCM17015BPB
SMD-4PSMD-4P New Arrivals ROHSjianfuUncategorised
README
README.mdLINE protocol
LINE is a bus type protocol that uses a single controller, it's based on the LIN protocol used in automotive products and extends the frame length and number of frames.
Usage
The project includes a CMake based environment that can be included as a subproject. A function call is used to instantiate the library in a way that's unique to the application.
include(tools/cmake/CPM.cmake)
CPMAddPackage("gh:c4deszes/bike-line-protocol#master")
line_codegen(TARGET protocol-stack
CONFIG config
ADAPTER
)
add_executable(MyApp src/main.c)
target_link_libraries(MyApp PUBLIC protocol-stack)A code generation configuration is required, a single instance multiple network definitions and multiple nodes can be used.
{
"Network": {
"channel": 0,
"rxBufferSize": 128,
"txBufferSize": 128,
"oneWire": true,
"network": "multi_node_network.json",
"nodes": {
"Peripheral1": {
"enabled": true,
"diagnostics": {
"channel": 0,
"enabled": true,
"initAddress": true
}
},
"Peripheral2": {
"enabled": true,
"diagnostics": {
"channel": 1,
"enabled": true,
"initAddress": true
}
}Building
The library only has interface and test targets, run the C library tests using
cmake --workflow --preset workflow-test.
Documentation is built using Sphinx with doxygen, that can be generated using
cmake as well by running cmake --workflow --preset workflow-docs.
Parts
111| Qty | Value | Footprint | References |
|---|---|---|---|
| 16 | 100n | Capacitor_SMD:C_0603_1608Metric | C1, C5, C6, C7, C8, C9, C10, C11, C12, C15, C18, C19, C20, C22, C28, C31 |
| 10 | 10k | Resistor_SMD:R_0402_1005Metric | R15, R16, R17, R18, R19, R27, R39, R40, R43, R44 |
| 7 | 10u | Capacitor_SMD:C_0805_2012Metric | C2, C3, C4, C21, C27, C32, C33 |
| 5 | LED | LED_SMD:LED_0603_1608Metric | D1, D9, D10, D11, D12 |
| 5 | TestPoint_Probe | TestPoint:TestPoint_Pad_D1.5mm | TP1, TP2, TP3, TP4, TP5 |
| 4 | 0 | Resistor_SMD:R_0402_1005Metric | R33, R34, R35, R36 |
| 4 | 220 | Resistor_SMD:R_0603_1608Metric | R23, R24, R25, R26 |
| 4 | MountingHole | MountingHole:MountingHole_2.2mm_M2 | H1, H2, H3, H4 |
| 3 | 1k | Resistor_SMD:R_0603_1608Metric | R5, R20, R21 |
| 3 | 1k | Resistor_SMD:R_0402_1005Metric | R13, R14, R42 |
| 3 | Conn_01x01 | local:BananaJack_15.3mm | J4, J5, J6 |
| 3 | SW_SPDT | local:S3PCBKP | SW1, SW2, SW3 |
| 2 | 10u | Inductor_SMD:L_0805_2012Metric | L3, L4 |
| 2 | 18p | Capacitor_SMD:C_0603_1608Metric | C14, C16 |
| 2 | 220p | Capacitor_SMD:C_0603_1608Metric | C13, C17 |
| 2 | 22u | Capacitor_SMD:C_0805_2012Metric | C29, C30 |
| 2 | 4.7k | Resistor_SMD:R_0402_1005Metric | R46, R47 |
| 2 | 47k | Resistor_SMD:R_0402_1005Metric | R1, R37 |
| 2 | B140-13-F | Diode_SMD:D_SMA | D3, D13 |
| 2 | BAS3005B | Diode_SMD:D_SOD-523 | D5, D6 |
| 2 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J7, J8 |
| 2 | Fiducial | Fiducial:Fiducial_1mm_Mask2mm | FID1, FID2 |
| 2 | MCP2003 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U4, U6 |
| 2 | SMF33CA-DIO | Diode_SMD:D_SMF | D7, D8 |
| 1 | 1.5k | Resistor_SMD:R_0402_1005Metric | R22 |
| 1 | 10uH | local:HPI0530 | L2 |
| 1 | 2.2n | Capacitor_SMD:C_0402_1005Metric | C23 |
| 1 | 2.2u | Capacitor_SMD:C_0805_2012Metric | C24 |
| 1 | 220 | Resistor_SMD:R_0402_1005Metric | R45 |
| 1 | 2N7002 | Package_TO_SOT_SMD:SOT-23 | Q6 |
| 1 | 2k | local:3305SMD-POT | R30 |
| 1 | 330 | Resistor_SMD:R_0402_1005Metric | R41 |
| 1 | 4.7uH | local:HPI0530 | L5 |
| 1 | 74HCT595 | Package_SO:SO-16_3.9x9.9mm_P1.27mm | U7 |
| 1 | 93LCxxC | Package_SO:SO-8_3.9x4.9mm_P1.27mm | U5 |
| 1 | Banana | local:BananaJack_15.3mm | J3 |
| 1 | CFPX-104 | Crystal:Crystal_SMD_5032-4Pin_5.0x3.2mm | Y1 |
| 1 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | FT4232H | Package_QFP:LQFP-64_10x10mm_P0.5mm | U3 |
| 1 | LMR51420 | Package_TO_SOT_SMD:SOT-23-6 | U8 |
| 1 | SN050-08 | Fuse:Fuse_1206_3216Metric | F1 |
| 1 | TPS61085 | Package_SO:TSSOP-8_3x3mm_P0.65mm | U1 |
| 1 | TVCM17015BPB | Button_Switch_SMD:SW_SPST_SKQG_WithStem | SW4 |
| 1 | USB_B | local:USB_B_Lumberg_2411_02_Horizontal | J1 |
Similar boards
- 2 layers41.7 × 108.9 mm

- 2 layers67.4 × 44.8 mm

- 2 layers49 × 47 mm

GNI plutoclocker
cr1tbit/GNI-plutoclocker
This device serves a couple of roles: allowing clocking adalm-pluto by an external clock source of broad frequency range injecting clock signal into RF trace, for clocking modded LNB supplying LNB with DC voltage…
72 parts6MIT - 2 layers100 × 100 mm

- 4 layers82 × 34 mm

Fiber phantom
jayis1/hacker-devices
Full-cycle hardware designs for security research devices — each device is a subfolder with its own README, schematics, PCB layout, and software stack
17 parts2 - 2 layers78 × 84 mm

- 2 layers100 × 95 mm

Controller
Doc-Raptor/dragon_controller
32bit 3d-printer controller board for 3d printers from china with the anet-stlye controller-board
88 parts3 - 2 layers84 × 138.6 mm

Questions
How big is the Line usb master PCB?
It measures 79.5 × 50 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Line usb master use?
111 parts, built around the MCP2003-E/P, 74HCT595D, FT4232HL and TPS61085. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Line usb master KiCad files?
From the c4deszes/bike-line-protocol repository on GitHub, at the commit this page was made from: the board is hardware/line-usb-master.kicad_pcb and its schematic hardware/line-usb-master.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Line usb master design in my own project?
Its repository states no licence, so its author keeps all rights: ask c4deszes before reusing the design.