2 layers56.6 × 22.2 mm
4 layers88.9 × 97 mm
Video thingy
C0DE-Z/LOUDA open source Analog video Destructor and Dirty mixer
- Size
- 88.9 × 97 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 56
- Nets
- 82
- Pads
- 304
- Tracks, vias
- 1,051, 123
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 22 May 2025
- Updated
- 24 Jun 2025
Overview
Video thingy is an open-source printed circuit board by C0DE-Z, from the C0DE-Z/LOUD repository on GitHub. It is a 4-layer board of 88.9 × 97 mm with 56 parts on 82 nets, routed with 1,051 tracks and 123 vias.
It is built around the LM1881N, ADG419BR and ADG734BRU, with the CD4051BE, MCP41010-E/P and RP2040-ZERO among its other parts. Its parts include 14 resistors, 10 ICs, 10 switches, 8 connectors and 5 diodes. It belongs with the RP2040 boards of this library.
Main components
8
LM1881N
PDIP-85V~12V NTSC、PAL、SECAM PDIP-8 Video Interface ICsTexas InstrumentsVideo Interface ICs
ADG419BR
SOIC8LC2MOS Precision Single SPDT Analog SwitchesAnalog DevicesUncategorised
ADG734BRU
TSSOP20CMOS, 2.5 Ohms Low Voltage, Quad SPDT SwitchAnalog DevicesUncategorised
CD4051BE
PDIP-16-55℃~+125℃ 125Ω 20MHz 3V~20V 450ns 8 8:1 PDIP-16 Analog Switches, Multiplexers ROHSTexas InstrumentsAnalog Switches, MultiplexersMCP41010-E/P
PDIP-8-40℃~+125℃ 1 10kΩ 1LSB 1MHz 1uA 2.7V~5.5V 256 52Ω、73Ω 800ppm/℃ Linear SPI Soft reset、Power-on reset、Mute function ±20% PDIP-8 Digital Potentiometers ROHSMicrochip TechnologyDigital Potentiometers
RP2040-ZERO
-- Development Boards & Kits ROHSWaveshareDevelopment Boards & Kits
CRCW120675R0FKEAHP
1206-55℃~+155℃ 200V 750mW 75Ω Thick Film Resistor ±1% ±100ppm/℃ 1206 Chip Resistor - Surface Mount ROHSVishay IntertechnologyChip Resistor - Surface Mount
RCJ-041
-插件 RCA Connector ROHSCUIAudio Connectors (Headphones)
README
README.mdLoud REV 1
A open source analog Video glitcher
-
Uses Karl Klomps Dirty Mixer
-
Audio Reacitve Effects
-
Check code branch for Source code,
Parts
56| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | CRCW120675R0FKEAHP | Shittersv2:RESC3116X65N | R13, R14, R15, R16, R17, R18, R19, R20, R21, R22, R23, R24 |
| 8 | RCJ-041 | Shitters:CUI_RCJ-041 | J1, J2, J3, J4, J5, J6, J7, J8 |
| 6 | RotaryEncoder | Rotary_Encoder:RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm | SW1, SW2, SW3, SW4, SW5, SW6 |
| 5 | NeoPixel_THT | LED_SMD:LED_Inolux_IN-PI554FCH_PLCC4_5.0x5.0mm_P3.2mm | D1, D2, D3, D4, D5 |
| 4 | Push_Button | Button_Switch_THT:SW_PUSH_6mm | SW10, SW11, SW12, SW13 |
| 4 | TestPoint | TestPoint:TestPoint_Pad_D1.5mm | TP4, TP5, TP6, TP15 |
| 2 | 0.1uF_0603_16V | Shittersv2:CAPC3316X140N | C1, C2 |
| 2 | ADG419BR | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U9, U10 |
| 2 | MountingHole_2.1mm | MountingHole:MountingHole_2.1mm | MOUNT, MOUNT2 |
| 1 | 680k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R10 |
| 1 | ADG734 | Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm | U7 |
| 1 | CD4051B | ! VideoThingy:N16 | U2 |
| 1 | LM1881N | ! VideoThingy:N08E_TEX | U4 |
| 1 | MAX4392EUA_T | ! VideoThingy:21-0036_U8&plus_1_MXM | U5 |
| 1 | MCP23008-xML | Package_DFN_QFN:QFN-20-1EP_4x4mm_P0.5mm_EP2.7x2.7mm | U6 |
| 1 | MCP23017_ML | Package_DFN_QFN:QFN-28-1EP_6x6mm_P0.65mm_EP4.25x4.25mm | U1 |
| 1 | MCP41010 | Shittersv2:DIP254P762X432-8 | U3 |
| 1 | PTA6043-2015DP-B103 | Shitters:PTA6043-2015DP-B103 | R1 |
| 1 | RP2040-ZERO | Shittersv2:MODULE_RP2040-ZERO | U8 |
| 1 | ~ | ! VideoThingy:DBV5-M | N1 |
Questions
How big is the Video thingy PCB?
It measures 88.9 × 97 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Video thingy use?
56 parts, built around the LM1881N, ADG419BR, ADG734BRU and CD4051BE. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Video thingy KiCad files?
From the C0DE-Z/LOUD repository on GitHub, at the commit this page was made from: the board is video-thingy.kicad_pcb and its schematic src/odyssey.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Video thingy design in my own project?
Its repository states no licence, so its author keeps all rights: ask C0DE-Z before reusing the design.
Similar boards
- 4 layers106.1 × 132 mm
- 2 layers40 × 40 mm
- 4 layers50 × 50 mm
- 2 layers100 × 49.9 mm
- 2 layers53.1 × 59.4 mm
NTSCope
miakizz/Videoscope
Board for viewing composite video (PAL, NTSC, or SECAM) on an oscilliscope This is a layout of this circuit by W2AEW
38 parts - 2 layers139 × 74 mm
- 6 layers66.4 × 66.5 mm
NU180
NuZondar/NU180
A reverse-engineered replacement for the U180 hybrid in the HPAK 3458A DVM.
115 parts10