2 layers112.6 × 85.4 mm
2 layers63 × 85 mm
Videopac usbcart kicad5
bwack/Videopac_USBCART3- Size
- 63 × 85 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 27
- Nets
- 70
- Pads
- 199
- Tracks, vias
- 858, 92
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 20 Apr 2019
- Updated
- 5 May 2019
Overview
Videopac usbcart kicad5 is an open-source printed circuit board by bwack, from the bwack/Videopac_USBCART repository on GitHub, published under the LGPL-3.0 licence. It is a 2-layer board of 63 × 85 mm with 27 parts on 70 nets, routed with 858 tracks and 92 vias.
It is built around the ATMEGA16A-AU and MBR0520. Its parts include 10 capacitors, 5 resistors, 5 diodes, 4 connectors and 2 ICs. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
2
ATMEGA16A-AU
TQFP-44(10x10)-40℃~+85℃ 10bit 16KB 16MHz 1KB 2.7V~5.5V 32 512Byte 8 Bit AVR Built-in FLASH TQFP-44(10x10) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
MBR0520
SOD-123-55℃~+150℃ 20V 450mV@500mA 5.5A 500mA Independent SOD-123 Schottky Diodes ROHSJiangsu Changjing Electronics Technology (CJ)Schottky Diodes
Parts
27| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 100nF | Capacitor_SMD:C_0603_1608Metric | C3, C4, C5, C6, C7, C8, C10 |
| 2 | 22pF | Capacitor_SMD:C_0603_1608Metric | C1, C2 |
| 2 | 68 | Resistor_SMD:R_0603_1608Metric | R3, R4 |
| 2 | BZT52Bxx | Diode_SMD:D_SOD-123 | D3, D4 |
| 2 | MBR0520 | Diode_SMD:D_SOD-123 | D2, D5 |
| 1 | 12MHz | Crystal:Crystal_SMD_HC49-SD | Y1 |
| 1 | 1k5 | Resistor_SMD:R_0603_1608Metric | R5 |
| 1 | 4k7 | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | 4u7 | Capacitor_SMD:C_0805_2012Metric | C9 |
| 1 | 510 | Resistor_SMD:R_0603_1608Metric | R2 |
| 1 | ATmega16A-AU | Package_QFP:TQFP-44_10x10mm_P0.8mm | U1 |
| 1 | AVR-ISP-10 | Connector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_Horizontal | J3 |
| 1 | Conn_01x01_Male | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Horizontal | J4 |
| 1 | IDT7006PF-PN64 | Package_QFP:TQFP-64_14x14mm_P0.8mm | U2 |
| 1 | LED | LED_THT:LED_D5.0mm_Clear | D1 |
| 1 | USB_B | Connector_USB:USB_B_OST_USB-B1HSxx_Horizontal | J2 |
| 1 | Videopac-edgeconnector | videopac-usbcart-kicad5:videopac-edgecon | J1 |
Similar boards
- 2 layers66.8 × 46 mm
Atmega32
vedantjadhav304/Atmega32_DEV_BOARD
Open source AVR embedded system development board based on Atmega32
23 parts2 - 2 layers106.9 × 40.8 mm
- 2 layers33 × 48.9 mm
- 2 layers74 × 56 mm
05 Atmega16 IoT
pcb-firmware-embedded/Atmega16A_temperature_monitoring
This repository contains the complete development of a temperature monitoring and alarm system based on the ATmega16A microcontroller.
29 parts - 2 layers100 × 60 mm
- 2 layers140 × 120 mm
- 2 layers160 × 90 mm
Power Integrations interface
paltatech/VESC-controller
Made open source with KiCAD, an open source EDA tool.
1,126 parts356
Questions
How big is the Videopac usbcart kicad5 PCB?
It measures 63 × 85 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Videopac usbcart kicad5 use?
27 parts, built around the ATMEGA16A-AU and MBR0520. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Videopac usbcart kicad5 KiCad files?
From the bwack/Videopac_USBCART repository on GitHub, at the commit this page was made from: the board is KiCad/videopac-usbcart-kicad5.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Videopac usbcart kicad5 design in my own project?
Its repository publishes it under the LGPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).