2 layers88.9 × 88.9 mm
2 layers61.2 × 96.8 mm
New- bord 4 motor
buntueng/TLB_gen22TLB 2 generation
- Size
- 61.2 × 96.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 46
- Nets
- 78
- Pads
- 254
- Tracks, vias
- 384, 5
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 3 Aug 2022
- Updated
- 2 Feb 2024
Overview
New- bord 4 motor is an open-source printed circuit board by buntueng, from the buntueng/TLB_gen2 repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 61.2 × 96.8 mm with 46 parts on 78 nets, routed with 384 tracks and 5 vias.
It is built around the B4B-XH-A(LF)(SN). Its parts include 24 resistors, 9 connectors, 8 capacitors and 5 ICs. It belongs with the robots and motor control boards and the RP2040 boards of this library.
Main components
1README
README.mdTLB_gen2
โปรแกรมทั้งหมดใน TLB 2nd generation แตกต่างจาก TLB ทั้งหมด โดยได้เลือกใช้บอร์ด pi pico เข้ามาแทนบอร์ด arduino mega และ arduino nano เนื่องจากเหตุผลทางด้านราคาและประสิทธิภาพของตัวประมวลผล
Parts
46| Qty | Value | Footprint | References |
|---|---|---|---|
| 24 | R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R10, R11, R12, R13, R14, R15, R16, R17, R18, R19, R20, R21, R22, R23 +8 |
| 9 | B4B-XH-A(LF)(SN) | 4pin:JST_B4B-XH-A(LF)(SN) | J1, J2, J3, J4, J5, J6, J7, J8, J9 |
| 4 | A4988_STEPPER_MOTOR_DRIVER_CARRIER | A4988:MODULE_A4988_STEPPER_MOTOR_DRIVER_CARRIER | U2, U3, U4, U5 |
| 4 | C | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2, C3, C4 |
| 4 | C | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C5, C6, C7, C8 |
| 1 | Pico | RaspberryPi_pico:RPi_Pico_SMD_TH | U1 |
More from buntueng/TLB_gen2
4- 2 layers88.9 × 88.9 mm
- 2 layers115.2 × 100.3 mm
- 2 layers64.3 × 84.9 mm
Similar boards
- 2 layers135 × 100 mm
- 4 layers46.4 × 99.8 mm
Trimix Analyzer
magnus188/aegir
Open-source ESP32-P4 trimix analyzer prototype for technical diving,
171 parts14 - 4 layers100 × 50 mm
Chronolog
slemanz/chronolog
STM32-based temperature data logger with RTC, NOR flash storage, LCD and Wi-Fi. Hardware and firmware.
95 parts5 - 2 layers100 × 65 mm
- 4 layers47 × 59.7 mm
Tackle sensor hardware
Celnardur/rfc_tackle_sensor
Open a git bash terminal in the directory of your choosing and call the following command:
79 parts3MIT - 4 layers275 × 240 mm
- 2 layers50 × 100 mm
Pico pcb
Farex-GH/Open-Genbu-GC
Replacement PCB and firmware for Genbu Groove Coaster controllers
22 parts1 - 2 layers100 × 75 mm
Questions
How big is the New- bord 4 motor PCB?
It measures 61.2 × 96.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the New- bord 4 motor use?
46 parts, built around the B4B-XH-A(LF)(SN). The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the New- bord 4 motor KiCad files?
From the buntueng/TLB_gen2 repository on GitHub, at the commit this page was made from: the board is PCB/Top_Box_Pypico/New-_bord_4_motor.kicad_pcb and its schematic ALL_CODE_TLB_GEN2_FOR_EDITE/CODE_DEMO/PCB/master/master.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the New- bord 4 motor design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).