2 layers60.5 × 60.5 mm
4 layers65 × 25.5 mm
STM32F4-simple
buczek-j/pcb-archive- Size
- 65 × 25.5 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 41
- Nets
- 71
- Pads
- 209
- Tracks, vias
- 369, 72
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 5 Jan 2021
- Updated
- 12 Mar 2021
Overview
STM32F4-simple is an open-source printed circuit board by buczek-j, from the buczek-j/pcb-archive repository on GitHub. It is a 4-layer board of 65 × 25.5 mm with 41 parts on 71 nets, routed with 369 tracks and 72 vias.
It is built around the STM32F405RGT6, AMS1117-3.3 and B5819W. Its parts include 18 capacitors, 7 resistors, 5 connectors, 4 diodes and 2 ICs. It belongs with the STM32 boards of this library.
Main components
3
STM32F405RGT6
LQFP-64(10x10)-40℃~+85℃ 1.8V~3.6V 12bit 12bit 168MHz 192KB 1MB 32 Bit 51 ARM Cortex-M4 Built-in FLASH LQFP-64(10x10) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)
AMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
B5819W
SOD-123-55℃~+125℃ 1.5A 1mA@40V 25A 40V 600mV@1A Standalone SOD-123 Schottky Diodes ROHSMDDSchottky Diodes
README
README.mdpcb-archive
Parts
41| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 100nF | Capacitor_SMD:C_0402_1005Metric | C1, C8, C9, C10, C11, C12, C13, C14, C15, C16 |
| 3 | 10uF | Capacitor_SMD:C_0402_1005Metric | C3, C4, C7 |
| 2 | 100 @100MHz | Inductor_SMD:L_0805_2012Metric | FB1, FB2 |
| 2 | 10k | Resistor_SMD:R_0402_1005Metric | R7, R8 |
| 2 | 2.2k | Resistor_SMD:R_0402_1005Metric | R4, R9 |
| 2 | 2.2uF | Capacitor_SMD:C_0402_1005Metric | C17, C18 |
| 2 | 20pF | Capacitor_SMD:C_0402_1005Metric | C5, C6 |
| 2 | 22 | Resistor_SMD:R_0402_1005Metric | R2, R3 |
| 2 | B5819W | Diode_SMD:D_SOD-123 | D1, D2 |
| 2 | Conn_01x24 | Connector_PinHeader_2.54mm:PinHeader_1x24_P2.54mm_Vertical | J5, J6 |
| 2 | RED | Diode_SMD:D_0402_1005Metric | D3, D4 |
| 1 | 10nF | Capacitor_SMD:C_0402_1005Metric | C2 |
| 1 | 220 | Resistor_SMD:R_0402_1005Metric | R1 |
| 1 | 25MHz | Crystal:Crystal_SMD_Abracon_ABM8G-4Pin_3.2x2.5mm | HSE1 |
| 1 | 500mA | Fuse:Fuse_0805_2012Metric | F1 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U1 |
| 1 | ARM 10-Pin Conector | Connector_PinHeader_1.27mm:PinHeader_2x05_P1.27mm_Vertical_SMD | J2 |
| 1 | LOGO | test:test7 | G*** |
| 1 | Power | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J1 |
| 1 | STM32F405RGT6 | Package_QFP:LQFP-64_10x10mm_P0.5mm | U2 |
| 1 | USB_B_Micro | Connector_USB:USB_Micro-B_Molex-105017-0001 | J4 |
More from buczek-j/pcb-archive
7- 2 layers40.5 × 40.5 mm
- 2 layers300 × 15 mm
- 2 layers93 × 194.4 mm
- 2 layers60.5 × 57 mm
- 4 layers20 × 6.2 mm
- 2 layers300 × 6 mm
Similar boards
- 4 layers50.8 × 83.8 mm
- 4 layers50 × 50 mm
STM32F4 Breakout
PhilCarPi/STM32F4_Breakout_Board
4 layer PCB that serves as a breakout board to an STM32F405 chip with an additional IMU chip just for fun. The breakout is for serial ports SPI, USART, I2C, and SWD.
56 parts2 - 4 layers50 × 50 mm
- 4 layers50.8 × 50.8 mm
STM32F4 Breakout
AlloDel/STM32-breakout-board
A simple programmable board based on an stm32 f4 board
44 parts - 4 layers99.2 × 98.9 mm
Micromouse kicad
tadzio8425/Micromouse
Micromouse developed by the IEEE Robotics and Automation Society chapter of the Universidad de Los Andes, Bogotá (2023-2024).
102 partsMIT - 4 layers50 × 50 mm
STM32F4 Breakout
alphaseneca/pcb_design_repo
A repository for storing and documenting the pcb design files.
43 parts1MIT - 4 layers55 × 55 mm
RBoard
pms67/LittleBrain-STM32F4-Sensorboard
STM32F4-based PCB interfacing with a variety of sensors.
90 parts339 - 2 layers50 × 66 mm
Questions
How big is the STM32F4-simple PCB?
It measures 65 × 25.5 mm and has 4 copper layers, 1.6 mm thick.
What parts does the STM32F4-simple use?
41 parts, built around the STM32F405RGT6, AMS1117-3.3 and B5819W. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the STM32F4-simple KiCad files?
From the buczek-j/pcb-archive repository on GitHub, at the commit this page was made from: the board is STM32F4-breakout/STM32F4-simple.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the STM32F4-simple design in my own project?
Its repository states no licence, so its author keeps all rights: ask buczek-j before reusing the design.