

STM32F4 Breakout
A simple programmable board based on an stm32 f4 board
- Size
- 50.8 × 50.8 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 44
- Nets
- 67
- Pads
- 192
- Tracks, vias
- 243, 48
- Pours
- 5
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 28 May 2022
- Updated
- 28 May 2022
Overview
STM32F4 Breakout is an open-source printed circuit board by AlloDel, from the AlloDel/STM32-breakout-board repository on GitHub. It is a 4-layer board of 50.8 × 50.8 mm with 44 parts on 67 nets, routed with 243 tracks and 48 vias.
It is built around the STM32F405RGT6, AMS1117-3.3 and B5819W. Its parts include 18 capacitors, 7 resistors, 6 connectors, 3 diodes and 2 ICs. It belongs with the interfaces and adapters boards and the STM32 boards of this library.
Main components
3STM32F405RGT6
LQFP-64(10x10)-40℃~+85℃ 1.8V~3.6V 12bit 12bit 168MHz 192KB 1MB 32 Bit 51 ARM Cortex-M4 Built-in FLASH LQFP-64(10x10) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)AMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsB5819W
SOD-123-55℃~+125℃ 1.5A 1mA@40V 25A 40V 600mV@1A Standalone SOD-123 Schottky Diodes ROHSMDDSchottky Diodes
README
README.mdSTM32-breakout-board
A simple programmable board based on an stm32 f4 board
PDF and images of schematics added to the /docs directory
Parts
44| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 100nF | Capacitor_SMD:C_0402_1005Metric | C7, C10, C11, C12, C13, C14, C15, C16, C17, C18 |
| 4 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J1, J2, J5, J6 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_4.3mm_M4_Pad_Via | H1, H2, H3, H4 |
| 3 | 10uF | Capacitor_SMD:C_0805_2012Metric | C1, C2, C9 |
| 2 | 100 @ 100MHz | Inductor_SMD:L_0805_2012Metric | FB1, FB2 |
| 2 | 10k | Resistor_SMD:R_0402_1005Metric | R2, R4 |
| 2 | 12pF | Capacitor_SMD:C_0402_1005Metric | C5, C6 |
| 2 | 2.2uF | Capacitor_SMD:C_0603_1608Metric | C3, C4 |
| 2 | 2k2 | Resistor_SMD:R_0402_1005Metric | R6, R7 |
| 2 | 2k2 | Resistor_SMD:R_0603_1608Metric | R3, R5 |
| 2 | Red | LED_SMD:LED_0603_1608Metric | D2, D3 |
| 1 | 10nF | Capacitor_SMD:C_0402_1005Metric | C8 |
| 1 | 16MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | HSE1 |
| 1 | 220 | Resistor_SMD:R_0402_1005Metric | R1 |
| 1 | 500mA | Fuse:Fuse_0603_1608Metric | F1 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U2 |
| 1 | B5819W | Diode_SMD:D_SOD-123 | D1 |
| 1 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J4 |
| 1 | Conn_02x05_Odd_Even | Connector_PinHeader_1.27mm:PinHeader_2x05_P1.27mm_Vertical_SMD | J3 |
| 1 | STM32F405RGT6 | Package_QFP:LQFP-64_10x10mm_P0.5mm | U1 |
Similar boards
- 4 layers50.8 × 83.8 mm

- 4 layers50 × 50 mm

STM32F4 Breakout
PhilCarPi/STM32F4_Breakout_Board
4 layer PCB that serves as a breakout board to an STM32F405 chip with an additional IMU chip just for fun. The breakout is for serial ports SPI, USART, I2C, and SWD.
56 parts2 - 4 layers50 × 50 mm

- 4 layers65 × 25.5 mm

- 4 layers99.2 × 98.9 mm

Micromouse kicad
tadzio8425/Micromouse
Micromouse developed by the IEEE Robotics and Automation Society chapter of the Universidad de Los Andes, Bogotá (2023-2024).
102 partsMIT - 4 layers50 × 50 mm

STM32F4 Breakout
alphaseneca/pcb_design_repo
A repository for storing and documenting the pcb design files.
43 parts1MIT - 4 layers55 × 55 mm

RBoard
pms67/LittleBrain-STM32F4-Sensorboard
STM32F4-based PCB interfacing with a variety of sensors.
90 parts339 - 2 layers50 × 66 mm

Questions
How big is the STM32F4 Breakout PCB?
It measures 50.8 × 50.8 mm and has 4 copper layers, 1.6 mm thick.
What parts does the STM32F4 Breakout use?
44 parts, built around the STM32F405RGT6, AMS1117-3.3 and B5819W. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the STM32F4 Breakout KiCad files?
From the AlloDel/STM32-breakout-board repository on GitHub, at the commit this page was made from: the board is STM32F4_Breakout.kicad_pcb and its schematic STM32F4_Breakout.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the STM32F4 Breakout design in my own project?
Its repository states no licence, so its author keeps all rights: ask AlloDel before reusing the design.