2 layers123 × 50 mm
2 layers62 × 15 mm
Card reader
bubbapizza/doorController1A simple arduino RFID door controller
- Size
- 62 × 15 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 7
- Nets
- 8
- Pads
- 20
- Tracks, vias
- 17, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 3
- Created
- 11 Sep 2013
- Updated
- 25 Dec 2014
Overview
Card reader is an open-source printed circuit board by bubbapizza, from the bubbapizza/doorController repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 62 × 15 mm with 7 parts on 8 nets, routed with 17 tracks and 0 vias.
Its parts include 2 resistors, 2 diodes, 2 connectors and 1 IC. It belongs with the radio and wireless boards of this library.
README
READMEThis is (going to be) a full DIY solution for a door controller. The door can be locked or unlocked using an arduino or a raspberry pi to interface witha Parallax serial RFID card reader for the controller hardware.
The backend logic for the door controller is handled in python.
The arduino sketches have no logic in them whatsoever. All they do is
accept single character commands over the virtual serial port
and control some lights, a buzzer and rfid controller. All back-end logic
is handled using python.
I've also included a couple Arduino sketches for dealing w/ Wiegand RFID card readers. I'm not sure if the wiegand stuff actually works or not since I never tested it. One sketch is an RFID emulator which is supposed to emulate a wiegand card reader. The other sketch is for controlling a door using a device that speaks the wiegand protocol. testing
Shawn Wilson Oct 29, 2013
Parts
7| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 330 | R3-LARGE_PADS | R9, R10 |
| 1 | BUZZER | BUZZER_SMALL | U1 |
| 1 | CONN_4 | PIN_ARRAY_4x1_RIGHT_ANGLE | P5 |
| 1 | CONN_6 | PINS_3x2_WIDE_SMD | P7-416 |
| 1 | LED | LED-5MM-RED | D6 |
| 1 | LED | LED-5MM | D7 |
Questions
How big is the Card reader PCB?
It measures 62 × 15 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Card reader use?
7 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Card reader KiCad files?
From the bubbapizza/doorController repository on GitHub, at the commit this page was made from: the board is KiCAD/rpi-door-control/card-reader.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Card reader design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
More from bubbapizza/doorController
2- 2 layers85 × 58.5 mm
Similar boards
- 2 layers
Encoder
byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.
7 parts4.3kMIT - 2 layers40 × 20 mm
- 2 layers19.8 × 30 mm
- 2 layers35.6 × 58.2 mm
Display Carrier
AxxAxx/AxxSolder
STM32 Based soldering station for JBC cartridges, 9-24 VDC and USB-PD power
7 parts1.7kGPL-3.0 - 2 layers20.3 × 16.3 mm
- 2 layers26 × 44 mm
Compact carrier board
jamro/tiny-engineer
A small desktop robot that brings an AI coding assistant to life, physically acting out when it reads files, thinks, writes code, and finishes work.
7 parts1.1k - 2 layers26.4 × 53.8 mm
Atari pickup
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
7 parts1kGPL-3.0 - 2 layers
