

MoistureSensor
Vertical Farming
- Size
- 22.1 × 117.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 25
- Nets
- 19
- Pads
- 78
- Tracks, vias
- 119, 17
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 20 Mar 2022
- Updated
- 13 Dec 2022
Overview
MoistureSensor is an open-source printed circuit board by brycesilan, from the brycesilan/CSUS-Senior-Project repository on GitHub, published under the MIT licence. It is a 2-layer board of 22.1 × 117.5 mm with 25 parts on 19 nets, routed with 119 tracks and 17 vias.
It is built around the OP07, HT7550 and RJ45. Its parts include 7 capacitors, 7 resistors, 3 ICs, 3 diodes and 2 connectors.
Main components
3OP07
SOP-8-20℃~+85℃ -22V~-3V、3V~22V 1 1.8nA 1.8uV/℃ 10nV/√Hz@1kHz 120dB 15pA/℃ 170V/ms 2.7mA 22V 500kHz 60uV 800pA SOP-8 Operational Amplifier ROHSSlkorOperational AmplifierHT7550
SOT-23-40℃~+85℃@(Ta) 1 100mV@(1mA) 150mA 2.5uA 28V 5V Fixed Positive SOT-23 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTWGMCVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsRJ45
TH-12PTH-12P SMT ROHSJLCPCB AssemblyUncategorised
README
README.mdCSUS Senior Project
Vertical farming applies modern technologies to revolutionize the traditional agriculture process that has remained unchanged for millennia. Because traditional farming is limited in a 2D space it is very efficient at utilizing a given amount of land for food production. Transitioning the possible area, we can cultivate to a 3D space that can sustain exponentially larger yields than a traditional farm. Vertical farming uses a soilless method of growing food, meaning we can grow the food anywhere in the world with higher yields and fewer resources. With the human population on Earth exploding, the only way we can support the food demands of the future is to expand our food production capabilities into a whole new dimension… Up

A Collaboration with Silicon Valley Mechatronics

Parts
25| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 1.1k | Resistor_SMD:R_0603_1608Metric | R5, R6 |
| 2 | 100nF | Capacitor_SMD:C_0402_1005Metric | C4, C7 |
| 2 | 10k | Resistor_SMD:R_0402_1005Metric | R3, R7 |
| 2 | 10uF | Capacitor_SMD:C_0805_2012Metric | C2, C3 |
| 2 | RJ45 | 54602-908LF:AMPHENOL_54602-908LF | J1, J2 |
| 1 | 1.5k | Resistor_SMD:R_0402_1005Metric | R2 |
| 1 | 10nF | Capacitor_SMD:C_0402_1005Metric | C5 |
| 1 | 1M | Resistor_SMD:R_0402_1005Metric | R4 |
| 1 | 1N4148 | Diode_SMD:D_SOD-323F | D1 |
| 1 | 1uF | Capacitor_SMD:C_0603_1608Metric | C6 |
| 1 | 330 | Resistor_SMD:R_0402_1005Metric | R1 |
| 1 | 470pF | Capacitor_SMD:C_0402_1005Metric | C1 |
| 1 | 50mA | Fuse:Fuse_1206_3216Metric | F1 |
| 1 | BLUE LED | LED_SMD:LED_0805_2012Metric | D3 |
| 1 | HT7550 | HT75501SOT89TRLF:HT7550-1-SOT89TRLF | U1 |
| 1 | LOGO | logo:logo | G*** |
| 1 | OP07 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U3 |
| 1 | Q_NPN_BEC | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | RED LED | LED_SMD:LED_0805_2012Metric | D2 |
| 1 | TLC555CDR | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U2 |
More from brycesilan/CSUS-Senior-Project
2- 2 layers129.5 × 130.8 mm

- 2 layers22.1 × 98 mm

Similar boards
- 4 layers54.1 × 19.4 mm

F405 pill
davidmolony/F405_pill
F405 Pill for running VESC based motor control from a Black/Blue Pill footprint
50 parts20BSD-3-Clause - 2 layers92.1 × 88.9 mm

- 2 layers43.6 × 25.5 mm

BikeUSBv2
H3wastooshort/BikeUSBv2
Charge your Phone off of your Bike while adapting charging power to available power / riding speed.
63 parts1GPL-3.0 - 4 layers51.4 × 61 mm

- 2 layers

- 2 layers25.4 × 25.4 mm

PIC Timer
cnkurzke/HelloPIC_Interrupts
Sample code for the PIC 12F1572 interrupt handling
25 partsBSD-2-Clause - 2 layers

- 2 layers130 × 80 mm

Questions
How big is the MoistureSensor PCB?
It measures 22.1 × 117.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the MoistureSensor use?
25 parts, built around the OP07, HT7550 and RJ45. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the MoistureSensor KiCad files?
From the brycesilan/CSUS-Senior-Project repository on GitHub, at the commit this page was made from: the board is Hardware/Moisture Sensor/Moisture Sensor Rev2/MoistureSensor.kicad_pcb and its schematic Hardware/Control_Board/Control_Board.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the MoistureSensor design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).