

Control Board
Vertical Farming
- Size
- 129.5 × 130.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 47
- Nets
- 93
- Pads
- 218
- Tracks, vias
- 238, 22
- Pours
- 8
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 20 Mar 2022
- Updated
- 13 Dec 2022
Overview
Control Board is an open-source printed circuit board by brycesilan, from the brycesilan/CSUS-Senior-Project repository on GitHub, published under the MIT licence. It is a 2-layer board of 129.5 × 130.8 mm with 47 parts on 93 nets, routed with 238 tracks and 22 vias.
It is built around the ULN2003 and ALQ3F12. Its parts include 8 connectors, 7 resistors, 5 capacitors, 4 switches and 3 ICs. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
2README
README.mdCSUS Senior Project
Vertical farming applies modern technologies to revolutionize the traditional agriculture process that has remained unchanged for millennia. Because traditional farming is limited in a 2D space it is very efficient at utilizing a given amount of land for food production. Transitioning the possible area, we can cultivate to a 3D space that can sustain exponentially larger yields than a traditional farm. Vertical farming uses a soilless method of growing food, meaning we can grow the food anywhere in the world with higher yields and fewer resources. With the human population on Earth exploding, the only way we can support the food demands of the future is to expand our food production capabilities into a whole new dimension… Up

A Collaboration with Silicon Valley Mechatronics

Parts
47| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 197054301 | Samacsys:197054301 | J**, J**, J**, J**, J**, J**, J**, J** |
| 5 | 19705-4301 | Samacsys:197054301 | J4, J5, J6, J8, J112 |
| 5 | HDRV3W64P0X254_1X3_762X254X864P | Library:HDRV3W64P0X254_1X3_762X254X864P | A0, A2, A3, A4, T/H |
| 4 | ALQ3F12 | Samacsys:G5Q1A4DC24 | K1, K2, K3, K4 |
| 2 | 10k | Resistor_SMD:R_0402_1005Metric | R3, R5 |
| 2 | 10uF | Capacitor_SMD:C_1206_3216Metric | C1, C2 |
| 2 | 22uF | Capacitor_SMD:C_1206_3216Metric | C4, C5 |
| 2 | 6.8k | Resistor_SMD:R_0402_1005Metric | R6, R7 |
| 2 | LED_Red_power | LED_SMD:LED_0603_1608Metric | D1, D2 |
| 2 | Screw_Terminal_01x02 | Samacsys:197054301 | J2, J3 |
| 2 | ULN2003 | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U1, U2 |
| 1 | 100nF | Capacitor_SMD:C_0603_1608Metric | C3 |
| 1 | 10k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R1 |
| 1 | 20k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R2 |
| 1 | 3.3uH | Inductor_SMD:L_10.4x10.4_H4.8 | L1 |
| 1 | 56.2k | Resistor_SMD:R_0402_1005Metric | R4 |
| 1 | Arduino_Nano_v3.x | Library:HDRV3W64P0X254_1X3_762X254X864P | A1 |
| 1 | Arduino_Nano_v3.x | Module:Arduino_Nano | A1 |
| 1 | PMOS | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | Q1 |
| 1 | Q_Dual_PMOS_S1G1S2G2D2D2D1D1 | Package_SO:SOP-8_3.9x4.9mm_P1.27mm | Q2 |
| 1 | Raspberry_Pi_2_3 | Library Loader:HDRV40W64P254_2X20_5080X500X884P | J1 |
| 1 | TPS563200 | Package_TO_SOT_SMD:SOT-23-6 | U3 |
More from brycesilan/CSUS-Senior-Project
2- 2 layers22.1 × 117.5 mm

- 2 layers22.1 × 98 mm

Similar boards
- 4 layers99.6 × 76.2 mm

- 2 layers31 × 64 mm

Power driver
jmfriedt/SDR-GB-SAR
Opensource, openhardware implementation of a Software Defined Radio (SDR) Ground Based Synthetic-Aperture RADAR (GB-SAR)
6 parts70 - 2 layers160 × 100 mm

MPCNC Nano Estlcam Shield
tnn85/MPCNC-Nano-Estlcam-Shield
Ein CNC Shield für die MPCNC in Verwendung mit Estlcam
96 parts70 - 2 layers42.5 × 43.2 mm

ElectronicFocuser
jlecomte/ascom-oag-focuser
Open Source ASCOM-Compatible OAG Focuser For Astrophotography
4 parts55MIT - 4 layers100 × 49.8 mm

- 2 layers134 × 91 mm

- 2 layers75 × 60 mm

DUTler V2
TheYoctoJester/dutler
A bench butler for your Device Under Test: turns a Raspberry Pi Pico into a USB-serial console bridge with power-relay and MOSFET strap/reset control for embedded-Linux bring-up and hardware-in-the-loop.
54 parts23Apache-2.0 - 4 layers76 × 82.5 mm

Nucleo64 CNC
terjeio/CNC_Breakout_Nucleo64
CNC breakout for STM324F411 and ST32F446 development boards
120 parts22
Questions
How big is the Control Board PCB?
It measures 129.5 × 130.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Control Board use?
47 parts, built around the ULN2003 and ALQ3F12. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Control Board KiCad files?
From the brycesilan/CSUS-Senior-Project repository on GitHub, at the commit this page was made from: the board is Hardware/Control_Board/Control_Board.kicad_pcb and its schematic Hardware/Control_Board/Control_Board.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Control Board design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).