
Hub16
joshajohnson/Hub16
A macro pad with 16 keys, two rotary encoders, a four port USB hub, and plenty of LEDs!

Custom 2 by 2 mechanical keyboard PCB.
Keyboard Schematic is an open-source printed circuit board by BryanGuan24, from the BryanGuan24/Custom-Keyboard-Project repository on GitHub. It is a 2-layer board of 64.3 × 38.1 mm with 24 parts on 42 nets, routed with 221 tracks and 22 vias.
It is built around the ATMEGA32U4. Its parts include 8 capacitors, 5 switches, 4 resistors, 4 diodes and 1 IC. It belongs with the keyboards and input boards and the AVR (ATmega, ATtiny) boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 0.1u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3, C4, C5, C6 |
| 4 | D | keyboard_parts:D_SOD123_axial | D1, D2, D3, D4 |
| 4 | KEYSW | keebs:Mx_Alps_100 | K1, K2, K3, K4 |
| 2 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2 |
| 2 | 22 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3, R4 |
| 2 | 22p | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2 |
| 1 | 1u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C8 |
| 1 | 4.7u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C7 |
| 1 | ATMEGA32U4 | Housings_QFP:TQFP-44_10x10mm_Pitch0.8mm | U1 |
| 1 | SW_PUSH | Button_Switch_SMD:SW_SPST_TL3342 | SW1 |
| 1 | USB_mini_micro_B | keyboard_parts:USB_miniB_hirose_5S8 | J1 |
| 1 | XTAL_GND | user:crystal_FA238-TSX3225 | X1 |

joshajohnson/Hub16
A macro pad with 16 keys, two rotary encoders, a four port USB hub, and plenty of LEDs!

tmk/USB2USB_Converter
USB to USB keyboard protocol converter supported by TMK keyboard firmware



evyd13/gh80-series
GH80-1800, GH80-3700 and GH80-3003 by Evy (aka anykeys.eu)



It measures 64.3 × 38.1 mm and has 2 copper layers, 1.6 mm thick.
24 parts, built around the ATMEGA32U4. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the BryanGuan24/Custom-Keyboard-Project repository on GitHub, at the commit this page was made from: the board is Keyboard files/Keyboard_Schematic.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask BryanGuan24 before reusing the design.