

Fuente-12v
Proyecto para la materia Electrónica de Potencia en UTN FRBA - Año 2025
- Size
- 154 × 85 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 98
- Nets
- 57
- Pads
- 234
- Tracks, vias
- 417, 55
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 25 Aug 2025
- Updated
- 5 Feb 2026
Overview
Fuente-12v is an open-source printed circuit board by brunogle, from the brunogle/fuente-12v repository on GitHub. It is a 2-layer board of 154 × 85 mm with 98 parts on 57 nets, routed with 417 tracks and 55 vias.
It is built around the NE555P, TCMT1107 and UCC287501DBV, with the 1N4148WT, BZT52C20 and CSD16403Q5A among its other parts. Its parts include 29 resistors, 27 capacitors, 9 diodes, 5 ICs and 5 connectors.
Main components
11NE555P
DIP-80℃~+70℃ 100kHz 10mA 4.5V~16V DIP-8 555 Timers / Counters ROHSTexas InstrumentsTimers / CountersTCMT1107
SOP-4-1.27mm-40℃~+100℃ 1 1.35V 160% 3.75kV 300mV@1mA,10mA 5.5us@2mA,100Ω 50mA 60mA 6V 70V 7us 80% DC Phototransistor SOP-4-1.27mm Transistor, Photovoltaic Output Optoisolators ROHSVishay IntertechnologyTransistor, Photovoltaic Output OptoisolatorsUCC287501DBV
SOT-23-6-40℃~+125℃ 10V~26V 65kHz 80% CCM Flyback Isolation Over Voltage Protection、Under Voltage Protection、Over Current Protection、Short Circuit Protection、Soft Start、Over Temperature Protection Secondary-Side Feedback SOT-23-6 AC-DC Controllers and Regulators ROHSTexas InstrumentsUncategorised1N4148WT
SOD-523-55℃~+150℃ 1.25V@150mA 100V 150mA 150mW 1uA@75V 2A 4ns Independent SOD-523 Switching Diodes ROHShongjiachengSwitching DiodesBZT52C20
SOD-123Zener DiodesDOWOCSD16403Q5A
SON-8(5x6)-55℃~+150℃ 1 N-channel 1.9V 100A 160pF 18nC@4.5V 2.08nF 2.66nF 25V 3.1W 3.7mΩ@4.5V N-Channel SON-8(5x6) MOSFETs ROHSTexas InstrumentsMOSFETsES1J
SMA(DO-214AC)-55℃~+150℃ 1 Independent 1.7V@1A 1A 35ns 5uA@600V 600V SMA Fast Recovery / High Efficiency Diodes ROHSMDDDiodes - Rectifiers - Fast RecoveryIPP65R190C7
TO-220TO-220 MOSFETs ROHSInfineon TechnologiesMOSFETsKBL10
KBL-55℃~+150℃ 1V@2.0A 1kV 250A 4A 5uA@1000V、500uA@1000V Single-Phase Rectifier KBL Bridge Rectifiers ROHSTOSBridge RectifiersMBR20200CT
TO-220AB-3-55℃~+150℃ 1 Pair Common Cathode 150A 200V 200uA@200V 20A 950mV@10A TO-220AB-3 Schottky Diodes ROHSMDDSchottky DiodesST-110BH
--20℃~+75℃ 150mA 2 500V 50V 7.5Ω - Common Mode Filters ROHSKEMETCommon Mode Filters
Parts
98| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | TestPoint | Connector_PinHeader_1.00mm:PinHeader_1x01_P1.00mm_Vertical | TP1, TP2, TP3, TP4, TP5, TP6, TP7, TP8, TP9, TP10, TP11 |
| 4 | 10 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3, R9, R22, R23 |
| 4 | 1N4148WT | Diode_SMD:D_SOD-523 | D5, D6, D8, D9 |
| 4 | MountingHole | MountingHole:MountingHole_4.3mm_M4_DIN965 | H1, H2, H3, H4 |
| 3 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R7, R21, R26 |
| 3 | 2M | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R12, R13, R14 |
| 3 | 4.7uF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C13, C15, C16 |
| 2 | 0.018 | Resistor_SMD:R_2512_6332Metric_Pad1.40x3.35mm_HandSolder | R5, R8 |
| 2 | 0.47 | Resistor_SMD:R_2512_6332Metric_Pad1.40x3.35mm_HandSolder | R24, R25 |
| 2 | 100nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C22, C26 |
| 2 | 10n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C18, C25 |
| 2 | 1M | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1, R29 |
| 2 | 1nF Y1 | Capacitor_THT:C_Disc_D10.5mm_W5.0mm_P10.00mm | C5, C7 |
| 2 | 220 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R27, R28 |
| 2 | 33nF X2 | Capacitor_THT:C_Rect_L11.5mm_W6.6mm_P10.00mm_MKT | C6, C27 |
| 2 | 470u | Capacitor_THT:CP_Radial_D13.0mm_P5.00mm | C4, C9 |
| 2 | 680pF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C17, C19 |
| 1 | 100 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R11 |
| 1 | 100uF | Capacitor_THT:CP_Radial_D8.0mm_P3.80mm | C8 |
| 1 | 10nF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C14 |
| 1 | 10uH 3A | Inductor_THT:L_Toroid_Vertical_L16.0mm_W8.0mm_P7.62mm | L1 |
| 1 | 120k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R6 |
| 1 | 133k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R19 |
| 1 | 150uF 400V | Capacitor_THT:CP_Radial_D18.0mm_P7.50mm | C2 |
| 1 | 1A 20mm | fuente-12v:Fuseholder_BLX-A | F1 |
| 1 | 1k | Potentiometer_THT:Potentiometer_Bourns_3266Y_Vertical | RV2 |
| 1 | 1nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C21 |
| 1 | 1nF Y1 | Capacitor_THT:C_Disc_D16.0mm_W5.0mm_P10.00mm | C1 |
| 1 | 2.49k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R18 |
| 1 | 22 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R10 |
| 1 | 22pF 50V | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C23 |
| 1 | 23.4k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R16 |
| 1 | 4.7uF 50V | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C24 |
| 1 | 470nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C11 |
| 1 | 470nF 400V | Capacitor_THT:C_Disc_D14.5mm_W5.0mm_P7.50mm | C3 |
| 1 | 470pF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C10 |
| 1 | 51 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R15 |
| 1 | 56nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C12 |
| 1 | 56pF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C20 |
| 1 | 5k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R17 |
| 1 | 6.8k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2 |
| 1 | 750811744 | fuente-12v:750811744 | T1 |
| 1 | 80k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R4 |
| 1 | 86.6k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R20 |
| 1 | Bzt52c20 | Diode_SMD:Nexperia_CFP3_SOD-123W | D7 |
| 1 | CSD16403Q5A | Package_TO_SOT_SMD:TDSON-8-1 | Q2 |
| 1 | Conn_01x02_Pin | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Horizontal | J5 |
| 1 | Conn_01x03_Pin | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J3 |
| 1 | ES1J | Diode_SMD:D_SMA_Handsoldering | D4 |
| 1 | GREEN | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D3 |
| 1 | IPP65R190C7 | Package_TO_SOT_THT:TO-220-3_Vertical | Q1 |
| 1 | KBL10 | Diode_THT:Diode_Bridge_19.0x3.5x10.0mm_P5.0mm | D1 |
| 1 | MBR20200CT | Package_TO_SOT_THT:TO-220-3_Vertical | D2 |
| 1 | NE555P | Package_DIP:DIP-8_W7.62mm | U1 |
| 1 | OUTPUT | TerminalBlock:TerminalBlock_MaiXu_MX126-5.0-02P_1x02_P5.00mm | J4 |
| 1 | ST-110BH | fuente-12v:ST-110 | FL1 |
| 1 | Screw_Terminal_01x03 | TerminalBlock:TerminalBlock_MaiXu_MX126-5.0-03P_1x03_P5.00mm | J1 |
| 1 | Screw_Terminal_01x03 P5mm | TerminalBlock:TerminalBlock_MaiXu_MX126-5.0-03P_1x03_P5.00mm | J2 |
| 1 | TCMT1107 | Package_SO:SOP-4_4.4x2.6mm_P1.27mm | U4 |
| 1 | TL432DBZ | Package_TO_SOT_SMD:SOT-23W_Handsoldering | U3 |
| 1 | TPS24701DGKR | Package_SO:VSSOP-8_2.3x2mm_P0.5mm | U2 |
| 1 | UCC287501D | Package_TO_SOT_SMD:TSOT-23-6_HandSoldering | U5 |
| 1 | Varistor | Capacitor_THT:C_Disc_D8.0mm_W2.5mm_P5.00mm | RV1 |
Similar boards
- 2 layers264.8 × 118.6 mm

- 2 layers54.6 × 74.9 mm

- 4 layers161 × 100 mm

Current3x3A Artiq
KLFAMO/current3x3A_Artiq
3 channel current driver (up to 3A each channel) compatible with Artiq
365 parts - 2 layers115 × 78 mm

- 2 layers89.4 × 99.3 mm

- 4 layers65.1 × 70.2 mm

Standalone BQ25750 charger
loubnayesref/TI-s-BQ25750-Standalone-Charger
A kicad project for a charging module for a 3s of 4.2V li-ion battries, Based on TI's BQ25750 IC
67 parts - 2 layers68.6 × 46 mm

- 4 layers120 × 120 mm

Yellow
NabuCasa/yellow
Home Assistant Yellow - hardware for Home Assistant which grows with your needs.
322 parts116
Questions
How big is the Fuente-12v PCB?
It measures 154 × 85 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Fuente-12v use?
98 parts, built around the NE555P, TCMT1107, UCC287501DBV and 1N4148WT. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Fuente-12v KiCad files?
From the brunogle/fuente-12v repository on GitHub, at the commit this page was made from: the board is fuente-12v.kicad_pcb and its schematic fuente-12v.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Fuente-12v design in my own project?
Its repository states no licence, so its author keeps all rights: ask brunogle before reusing the design.