Skip to the content
2 layers83.5 × 83 mmHarmonicTremolo V01, the printed circuit board in 3D

HarmonicTremolo V01

brumpan/HarmonicTremolo_V01

A harmonic tremolo effect board for audio

Size
83.5 × 83 mm
Copper layers
2
Thickness
1.6 mm
Parts
60
Nets
41
Pads
154
Tracks, vias
270, 14
Pours
2
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
18 May 2022
Updated
18 May 2022

Overview

HarmonicTremolo V01 is an open-source printed circuit board by brumpan, from the brumpan/HarmonicTremolo_V01 repository on GitHub. It is a 2-layer board of 83.5 × 83 mm with 60 parts on 41 nets, routed with 270 tracks and 14 vias.

It is built around the LM324, LM358 and SM4001. Its parts include 30 resistors, 9 capacitors, 7 connectors, 5 ICs and 2 diodes.

Main components

3

README

README.md

HarmonicTremolo

A harmonic tremolo effect board for audio

Parts

60
QtyValueFootprintReferences
822kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR1, R3, R6, R7, R8, R12, R14, R15
4100kResistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolderR19, R21, R22, R24
4HoleMountingHole:MountingHole_3mm_Pad_TopBottomH1, H2, H3, H4
31kResistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolderR25, R27, R30
2100kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR4, R5
210kResistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolderR18, R29
210uCapacitor_THT:CP_Radial_D5.0mm_P2.00mmC6, C7
21MegResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR2, R10
222kResistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolderR26, R28
24.7uCapacitor_THT:CP_Radial_D5.0mm_P2.00mmC3, C9
247nCapacitor_THT:C_Rect_L7.0mm_W2.5mm_P5.00mmC1, C8
2VTL5CVactrol:VactrolU4, U5
1100kConnector_Wire:SolderWire-1sqmm_1x03_P7.8mm_D1.4mm_OD3.9mmIntensity1
1100nCapacitor_THT:C_Rect_L7.0mm_W2.5mm_P5.00mmC2
11MegConnector_Wire:SolderWire-1sqmm_1x03_P7.8mm_D1.4mm_OD3.9mmRate1
11uCapacitor_THT:C_Rect_L7.0mm_W3.5mm_P5.00mmC4
12.2MegResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR13
12.2kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR11
1220uCapacitor_THT:CP_Radial_D6.3mm_P2.50mmC5
127kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR16
14.7kResistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolderR17
1470kResistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolderR20
147kResistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolderR23
147kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR9
1CA1Connector_Wire:SolderWire-0.75sqmm_1x01_D1.25mm_OD3.5mmJ1
1CA2Connector_Wire:SolderWire-0.75sqmm_1x01_D1.25mm_OD3.5mmJ2
1CB1Connector_Wire:SolderWire-0.75sqmm_1x01_D1.25mm_OD3.5mmJ3
1CB2Connector_Wire:SolderWire-0.75sqmm_1x01_D1.25mm_OD3.5mmJ4
1InputConnector_Wire:SolderWire-0.75sqmm_1x01_D1.25mm_OD3.5mmJ5
1LEDLED_THT:LED_D5.0mmD2
1LM324Package_SO:SOIC-14_3.9x8.7mm_P1.27mmU2
1LM358Package_SO:SOIC-8_3.9x4.9mm_P1.27mmU3
1OutConnector_Wire:SolderWire-0.75sqmm_1x01_D1.25mm_OD3.5mmJ6
1Q_NJFET_DSGPackage_TO_SOT_THT:TO-92_Inline_WideQ1
1SM4001Diode_SMD:D_SOD-123D1
1TL074Package_DIP:DIP-14_W7.62mm_SocketU1
1V+Connector_Wire:SolderWire-0.75sqmm_1x01_D1.25mm_OD3.5mmJ7

Similar boards

  • 2 layers19 × 106 mmPetRockMain1, the printed circuit board in 3D

    PetRockMain1

    jsenzel1/petrock

    Eurorack components and footprints for KiCad.

    117 parts48
  • 2 layers109.4 × 108.5 mmQUAAD V1 1, the printed circuit board in 3D

    QUAAD V1 1

    mzourack/QUAAD

    quad 4-step Eurorack CV sequencer

    191 parts45
  • 2 layers49.5 × 106 mmSupra board, the printed circuit board in 3D

    Supra board

    jsenzel1/supra

    is multimode Eurorack module with 4 different experiments in long term time. you can run up to 2 modes at once. use the 4 way joystick and buttons to interact with the modes on the oled

    119 parts4
  • 2 layers89.8 × 55.6 mmC64-Pi Pico USB Keyboard, the printed circuit board in 3D

    C64-Pi Pico USB Keyboard

    baldengineer/C64-Pi-Pico-USB-Keyboard-Adapter

    Adapter to use serial/usb/wireless keyboard to type on C64

    49 parts3
  • 2 layersTR v0.1, the printed circuit board in 3D

    TR v0.1

    razvysme/Paisa-Soda

    A triple trigger delay for Eurorack systems.

    50 parts3CC0-1.0
  • 2 layers346.7 × 116.8 mmTeensyPoly41, the printed circuit board in 3D

    TeensyPoly41

    elephark/TeensyPoly41

    Hardware synth PCB using Teensy 4.1

    119 parts2
  • 2 layers153.9 × 99.6 mmControl mini, the printed circuit board in 3D

    Control mini

    eliasmonzon/kicad_mio

    64 parts1
  • 2 layers33.9 × 59.6 mmArduino Minimal Design, the printed circuit board in 3D

    Arduino Minimal Design

    SushantSaroch13/Arduino-Minimal-Design

    A minimal Arduino-compatible board built around the ATmega328P-M microcontroller with an integrated CH340E USB-to-Serial interface for direct programming via USB.

    41 parts1

Questions

How big is the HarmonicTremolo V01 PCB?

It measures 83.5 × 83 mm and has 2 copper layers, 1.6 mm thick.

What parts does the HarmonicTremolo V01 use?

60 parts, built around the LM324, LM358 and SM4001. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the HarmonicTremolo V01 KiCad files?

From the brumpan/HarmonicTremolo_V01 repository on GitHub, at the commit this page was made from: the board is HarmonicTremolo_V01/KiCad/HarmonicTremolo_V01.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the HarmonicTremolo V01 design in my own project?

Its repository states no licence, so its author keeps all rights: ask brumpan before reusing the design.