2 layers33.7 × 97.8 mm
HAN ESP TSS721
UtilitechAS/amsreader-firmware
ESP8266 and ESP32 compatible firmware to read, interpret and publish data to MQTT from smart electrical meters, both DLMS and DSMR is supported
29 parts470
2 layers51.4 × 43.2 mm
KC1FSZ Control Board-1
brucemack/KC1FSZ-Control-Board-1KiCad Project: Radio control board (VFO and BFO)
- Size
- 51.4 × 43.2 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 17
- Nets
- 33
- Pads
- 113
- Tracks, vias
- 89, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 10 Jun 2018
- Updated
- 10 Jun 2018
Overview
KC1FSZ Control Board-1 is an open-source printed circuit board by brucemack, from the brucemack/KC1FSZ-Control-Board-1 repository on GitHub. It is a 2-layer board of 51.4 × 43.2 mm with 17 parts on 33 nets, routed with 89 tracks and 0 vias.
It is built around the LM1117-3.3. Its parts include 5 connectors, 4 capacitors, 4 ICs and 1 resistor. It belongs with the NXP (LPC, Kinetis, i.MX RT) boards of this library.
Main components
1README
README.mdKC1FSZ-Control-Board-1
Parts
17| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 220u | Capacitors_THT:CP_Radial_D10.0mm_P5.00mm | C1, C2 |
| 1 | 0.1u | kc1fsz-footprint-library:C_Disc_D4.7mm_W2.5mm_P5.00mm | C3 |
| 1 | 10 | kc1fsz-footprint-library:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1 |
| 1 | 10u | Capacitors_THT:CP_Radial_D5.0mm_P2.50mm | C4 |
| 1 | Adafruit_SI5351a | kc1fsz-footprint-library:Adafruit_SI5351a_Module | U3 |
| 1 | Conn_01x01 | Pin_Headers:Pin_Header_Straight_1x01_Pitch2.54mm | J3 |
| 1 | Conn_01x03 | Pin_Headers:Pin_Header_Straight_1x03_Pitch2.54mm | J5 |
| 1 | Conn_01x04 | Pin_Headers:Pin_Header_Straight_1x04_Pitch2.54mm | J4 |
| 1 | Conn_01x11 | Pin_Headers:Pin_Header_Straight_1x11_Pitch2.54mm | J2 |
| 1 | Conn_01x12 | Pin_Headers:Pin_Header_Straight_1x12_Pitch2.54mm | J1 |
| 1 | LM1117-3.3 | TO_SOT_Packages_THT:TO-220_Vertical | U4 |
| 1 | OLED_128x64 | Pin_Headers:Pin_Header_Straight_1x04_Pitch2.54mm | U2 |
| 1 | Teensy3.2 | teensy:Teensy30_31_32_LC | U1 |
The 14 most common of 17 parts.
Similar boards
- 2 layers52.5 × 36.6 mm
ESP8266-WebRadio
karawin/Ka-Radio
A wifi webradio with only low cost boards ESP8266 and VS1053 by Jp Cocatrix
52 parts453 - 2 layers95.2 × 57.2 mm
- 2 layers189.5 × 204.9 mm
SmartSpin2k Panelized
doudar/SmartSpin2k
Transform your spin bike into a Smart Trainer!
749 parts292GPL-2.0 - 4 layers121.9 × 109.2 mm
Plinkyblack hwmidi jacks
plinkysynth/plinky_public
a public release of the plinky sw and hw
300 parts227 - 4 layers113.5 × 105.5 mm
Multistepper
eddyem/stm32samples
Code samples and ready projects based on bare-metal STM32
243 parts208 - 2 layers275 × 103 mm
- 2 layers43 × 34.3 mm
Questions
How big is the KC1FSZ Control Board-1 PCB?
It measures 51.4 × 43.2 mm and has 2 copper layers, 1.6 mm thick.
What parts does the KC1FSZ Control Board-1 use?
17 parts, built around the LM1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the KC1FSZ Control Board-1 KiCad files?
From the brucemack/KC1FSZ-Control-Board-1 repository on GitHub, at the commit this page was made from: the board is KC1FSZ-Control-Board-1.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the KC1FSZ Control Board-1 design in my own project?
Its repository states no licence, so its author keeps all rights: ask brucemack before reusing the design.