2 layers52 × 51 mm
Minimal edit V3
shabaz123/rp2040_custom_minimal
This repository contains modified versions of the Raspberry Pi RP2040 Minimal design, that are better for production.
37 parts4
4 layers50 × 60 mm
Jtag ft
BroGamesJaj/jtag-ftA simple FT2232HP board to program and debug fpgas and other jtag capable hardware.
- Size
- 50 × 60 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 62
- Nets
- 85
- Pads
- 257
- Tracks, vias
- 489, 85
- Pours
- 6
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 5 Sep 2026
- Updated
- 25 Sep 2026
Overview
Jtag ft is an open-source printed circuit board by BroGamesJaj, from the BroGamesJaj/jtag-ft repository on GitHub. It is a 4-layer board of 50 × 60 mm with 62 parts on 85 nets, routed with 489 tracks and 85 vias.
It is built around the 93LC66BT-I/OT, TLV75801PDBV and ABM8-272-T3, with the ILBB0603ER600V, M20-9960445 and PMEG3050BEP,115-JSM among its other parts. Its parts include 22 resistors, 20 capacitors, 8 diodes, 6 ICs and 3 connectors. It belongs with the interfaces and adapters boards of this library.
Main components
8
93LC66BT-I/OT
SOT-23-6-40℃~+85℃ 1,000,000 cycles 2.5V~5.5V 200 Years 2MHz 4Kbit 6ms SPI Software write protection function、Built-in write enable latch (WEL)、Power-down/Power-up protection circuit SOT-23-6 EEPROM ROHSMicrochip TechnologyEEPROM
TLV75801PDBV
SOT-23-5-40℃~+125℃@(Tj) 1 130mV@(500mA) 25uA 30uVrms 500mA 50dB@(1kHz) 550mV~5.5V 6V Adjustable Positive Under Voltage Lockout、Soft Start、Short Circuit Protection、Thermal Shutdown SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
ABM8-272-T3
SMD3225-4P-40℃~+85℃ 10pF 12MHz 50Ω SMD crystal oscillator ±30ppm ±30ppm SMD3225-4P Crystals ROHSAbraconCrystals
ILBB0603ER600V
06030603 Ferrite Beads ROHSVishay IntertechnologyFerrite BeadsM20-9960445
弯插,P=2.54mm-40℃~+105℃ 1 2.54mm 2.54mm 3A 4P 6.1mm Black Brass Gold Pin Header Right Angle 弯插,P=2.54mm Pin Headers ROHSHarwinPin Headers
PMEG3050BEP,115-JSM
SOD-128-55℃~+125℃ 1 Independent 350uA@60V 3A 60V 700mV@3A 80A SOD-128 Schottky Diodes ROHSJSMSEMISchottky Diodes
SMF5.0A
SOD-123FLESD And Surge Protection (TVS/ESD)hongjiachengUSB4930-00-A
-- HWDG ROHSGlobal Connector Technology (GCT)Uncategorised
README
README.mdJTAG-FT
A simple FT2232HP board to program and debug fpgas and other jtag capable hardware.
features:
- JTAG, 14pin xilinx jtag connector compatible
- UART
- Voltage level shifters for both UART and JTAG (1V1-5V)
setups:
-
Xilinx fpga programmer:
download Vivado(2025.1 or newer) then use the included program_ftdi.
command:
program_ftdi -write -ftdi FT2232HP -serial 0ABC01 -vendor "my vendor co" -board "my board" -desc "my product desc"
After this Vivado should be able to see the board as a valid programming cable official guide -
Lattice fpga programmer: TODO
-
Altera fpga programmer: TODO
images: assembled board
FT2232HP properties flashed
Parts
62| Qty | Value | Footprint | References |
|---|---|---|---|
| 16 | 100n | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C1, C2, C3, C4, C5, C6, C7, C8, C9, C10, C11, C15, C17, C18, C19, C20 |
| 6 | 2k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R4, R5, R12, R13, R14 |
| 5 | 10k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R6, R7, R8, R11, R17 |
| 3 | 33 | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R20, R21, R22 |
| 2 | 0 | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R18, R19 |
| 2 | 15p | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C14, C16 |
| 2 | 4u7 | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C12, C13 |
| 2 | 5k1 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R9, R16 |
| 2 | GREEN | LED_SMD:LED_0603_1608Metric | D5, D8 |
| 2 | SY205215AOC | Package_TO_SOT_SMD:SOT-23 | D3, D4 |
| 2 | YELLOW | LED_SMD:LED_0603_1608Metric | D6, D7 |
| 1 | 100k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R15 |
| 1 | 12k 1% | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R10 |
| 1 | 2k7 | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R2 |
| 1 | 510 | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R3 |
| 1 | 75867-302LF | Connector_IDC:IDC-Header_2x07_P2.54mm_Horizontal | J2 |
| 1 | 93LC66BT-I/OT | jtag_ft_EEPROM:SOT-23-6_MC_MCH | U5 |
| 1 | ABM8-272-T3 | Crystal:Crystal_SMD_Abracon_ABM8AIG-4Pin_3.2x2.5mm | Y1 |
| 1 | FT2232HPQ | jtag_ft_FT2232HPQ:QFN68_FT2232_FTD | U2 |
| 1 | ILBB0603ER600V | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | FB1 |
| 1 | M20-9960445 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Horizontal | J3 |
| 1 | NCP167AFCT350T2G | jtag_ft_LDO:WLCSP4_0P64X0P64_ONS | U1 |
| 1 | PMEG3050BEP_115 | jtag_ft_Schottky_Diode:CFP5_SOD128_NEX | CR1 |
| 1 | RED | LED_SMD:LED_0603_1608Metric | D2 |
| 1 | SMF5.0A | Diode_SMD:D_SMF | D1 |
| 1 | TLV75801PDBV | Package_TO_SOT_SMD:SOT-23-5 | U3 |
| 1 | TXU0202DCUR | jtag_ft_Level_Shifter2:SO8_DCU_TEX | U6 |
| 1 | TXU0304PWR | jtag_ft_Level_Shifter:TSSOP14_PW_TEX | U4 |
| 1 | USB4930-00-A | USB4930:GCT_USB4930-00-A_REVA | J1 |
Questions
How big is the Jtag ft PCB?
It measures 50 × 60 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Jtag ft use?
62 parts, built around the 93LC66BT-I/OT, TLV75801PDBV, ABM8-272-T3 and ILBB0603ER600V. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Jtag ft KiCad files?
From the BroGamesJaj/jtag-ft repository on GitHub, at the commit this page was made from: the board is pcb/jtag-ft.kicad_pcb and its schematic pcb/jtag-ft.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Jtag ft design in my own project?
Its repository states no licence, so its author keeps all rights: ask BroGamesJaj before reusing the design.
Similar boards
- 4 layers65 × 61 mm
Serberus
suddenabnormalsecrets/Serberus
Multi-headed and Multi-Protocol embedded system hacking tool.
108 partsApache-2.0 - 2 layers65 × 59.5 mm
Teensy 32 v2
jwatte/donkey_racing
Tools to help train for the Donkey Car machine learning racing
66 parts14MIT - 4 layers48 × 48 mm
- 2 layers54 × 85.6 mm
Board43
smartbank-inc/Board43
Board43 is an RP2350A-based microcontroller development board. Flash PicoRuby or your favorite firmware and start hacking.
583 parts30 - 4 layers80 × 80.2 mm
7-REV1B
DangerousPrototypes/BusPirate5-hardware
Bus Pirate Hardware and accessories for v5 and higher
251 parts125MIT - 4 layers144.3 × 143.8 mm
- 2 layers
RC KiCAD
dev-campusfab/FabRice
Documentation et code source de FabRice, le robot Autonome.
62 parts4MIT