Skip to the content
2 layersShelly connector, the printed circuit board in 3D

Breakout PCB to convert a Shelly into an access controler

Copper layers
2
Thickness
1.6 mm
Parts
7
Nets
10
Pads
22
Tracks, vias
21, 0
Pours
1
Routed
Yes
KiCad
KiCad 6 (file 20211014)
Created
14 Nov 2024
Updated
14 Nov 2024

Overview

Shelly connector is an open-source printed circuit board by bristolhackspace, from the bristolhackspace/shelly-connector repository on GitHub, published under the Apache-2.0 licence. It is a 2-layer board with 7 parts on 10 nets, routed with 21 tracks and 0 vias.

It is built around the BC237. Its parts include 4 connectors, 2 resistors and 1 transistor.

Main components

1

README

README.md

shelly-connector

Breakout PCB to convert a Shelly into an access controler

Parts

7
QtyValueFootprintReferences
2Conn_01x02Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_HorizontalJ2, J4
11kResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_HorizontalR1
1220Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_HorizontalR2
1BC237Package_TO_SOT_THT:TO-92_InlineQ1
1Conn_01x04Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_HorizontalJ3
1Conn_01x07Connector_PinHeader_1.27mm:PinHeader_1x07_P1.27mm_Vertical_SMD_Pin1LeftJ1

Similar boards

  • 2 layersBotCortex, the printed circuit board in 3D

    BotCortex

    jochenalt/Walter

    6DOF Industrial Robot, vintage style

    61 parts162
  • 2 layers160 × 74.9 mmGPSDO, the printed circuit board in 3D

    GPSDO

    szigix/YATPGPSDO

    Yet Another TruePosition GPSDO

    38 parts15GPL-3.0
  • 2 layers100.1 × 100.5 mmSDR Reciever, the printed circuit board in 3D

    SDR Reciever

    greenjacketgirl/SDR_Receiver

    This project is an attempt at designing and building a Software Defined Radio receiver that has the capabilities of listening to frequencies ranging from 500kHz to 50MHz utlizing the board designed, a sound card, and…

    176 parts8
  • 2 layers50.8 × 74.9 mmTagger production, the printed circuit board in 3D

    Tagger production

    lucullusTheOnly/OpenLaserTag

    Open Source System for the game Lasertag

    42 parts7
  • 2 layers47 × 81.5 mmExploere202, the printed circuit board in 3D

    Exploere202

    ambraglow/VLF-receiver

    ExplorerE202-based design

    60 parts3CERN-OHL-P-2.0
  • 2 layers70 × 30 mmStrober board, the printed circuit board in 3D

    Strober board

    Ardenryst/pinball-led-strober

    Device to trigger mods via existing lights.

    25 parts3MIT
  • 2 layers99.1 × 98.1 mmDoorbot Panel, the printed circuit board in 3D

    Doorbot Panel

    DoESLiverpool/doorbot-setup

    Scripts to install the software required to deploy the Raspberry Pi DoorBots

    26 parts2
  • 2 layers58.4 × 84.8 mmC64NIKI2, the printed circuit board in 3D

    C64NIKI2

    ibaldachini/C64NIKI2

    This work is licensed under a [Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License][cc-by-nc-sa].

    27 parts2

Questions

What parts does the Shelly connector use?

7 parts, built around the BC237. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Shelly connector KiCad files?

From the bristolhackspace/shelly-connector repository on GitHub, at the commit this page was made from: the board is Shelly Connector.kicad_pcb and its schematic Shelly Connector.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Shelly connector design in my own project?

Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).