

Shelly connector
Breakout PCB to convert a Shelly into an access controler
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 7
- Nets
- 10
- Pads
- 22
- Tracks, vias
- 21, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 14 Nov 2024
- Updated
- 14 Nov 2024
Overview
Shelly connector is an open-source printed circuit board by bristolhackspace, from the bristolhackspace/shelly-connector repository on GitHub, published under the Apache-2.0 licence. It is a 2-layer board with 7 parts on 10 nets, routed with 21 tracks and 0 vias.
It is built around the BC237. Its parts include 4 connectors, 2 resistors and 1 transistor.
Main components
1README
README.mdshelly-connector
Breakout PCB to convert a Shelly into an access controler
Parts
7| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Horizontal | J2, J4 |
| 1 | 1k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R1 |
| 1 | 220 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R2 |
| 1 | BC237 | Package_TO_SOT_THT:TO-92_Inline | Q1 |
| 1 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Horizontal | J3 |
| 1 | Conn_01x07 | Connector_PinHeader_1.27mm:PinHeader_1x07_P1.27mm_Vertical_SMD_Pin1Left | J1 |
Similar boards
- 2 layers

- 2 layers160 × 74.9 mm

- 2 layers100.1 × 100.5 mm

SDR Reciever
greenjacketgirl/SDR_Receiver
This project is an attempt at designing and building a Software Defined Radio receiver that has the capabilities of listening to frequencies ranging from 500kHz to 50MHz utlizing the board designed, a sound card, and…
176 parts8 - 2 layers50.8 × 74.9 mm

- 2 layers47 × 81.5 mm

- 2 layers70 × 30 mm

- 2 layers99.1 × 98.1 mm

Doorbot Panel
DoESLiverpool/doorbot-setup
Scripts to install the software required to deploy the Raspberry Pi DoorBots
26 parts2 - 2 layers58.4 × 84.8 mm

C64NIKI2
ibaldachini/C64NIKI2
This work is licensed under a [Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License][cc-by-nc-sa].
27 parts2
Questions
What parts does the Shelly connector use?
7 parts, built around the BC237. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Shelly connector KiCad files?
From the bristolhackspace/shelly-connector repository on GitHub, at the commit this page was made from: the board is Shelly Connector.kicad_pcb and its schematic Shelly Connector.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Shelly connector design in my own project?
Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).