2 layers28 × 25.5 mm
2 layers26 × 32 mm
F030
brightcloudy/pcbSome PCBs, hopefully
- Size
- 26 × 32 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 24
- Nets
- 23
- Pads
- 79
- Tracks, vias
- 137, 27
- Pours
- 7
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 20 Jun 2015
- Updated
- 2 Dec 2015
Overview
F030 is an open-source printed circuit board by brightcloudy, from the brightcloudy/pcb repository on GitHub, published under the MIT licence. It is a 2-layer board of 26 × 32 mm with 24 parts on 23 nets, routed with 137 tracks and 27 vias.
It is built around the STM32F030F4P6. Its parts include 10 capacitors, 4 resistors, 4 ICs, 3 connectors and 1 diode. It belongs with the STM32 boards of this library.
Main components
1README
vna-steps/slowdds/README.md
Parts
24| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 0.1u | Capacitors_SMD:C_0402 | C7, C8, C10 |
| 3 | 4.7u | Capacitors_SMD:C_0805 | C2, C4, C6 |
| 1 | 10k | Resistors_SMD:R_0402 | R3 |
| 1 | 10n | Capacitors_SMD:C_0402 | C3 |
| 1 | 10p | Capacitors_SMD:C_0603 | C5 |
| 1 | 10u | Capacitors_Tantalum_SMD:TantalC_SizeA_EIA-3216_Reflow | C1 |
| 1 | 1u | Capacitors_SMD:C_0402 | C9 |
| 1 | 3.3k | Resistors_SMD:R_0402 | R4 |
| 1 | 301k | Resistors_SMD:R_0402 | R2 |
| 1 | 4.7u | kicad:PFL2015 | L1 |
| 1 | 941k | Resistors_SMD:R_0402 | R1 |
| 1 | CONN_5V | Pin_Headers:Pin_Header_Straight_1x02 | P1 |
| 1 | LED | LEDs:LED-0603 | D1 |
| 1 | LM95071 | Housings_SOT-23_SOT-143_TSOT-6:SOT-23-5 | U3 |
| 1 | LTC3410 | Housings_SOT-23_SOT-143_TSOT-6:SC-70-6 | U2 |
| 1 | OSC | bce:SIOSC | U1 |
| 1 | STM32F030F4 | Housings_SSOP:TSSOP-20_4.4x6.5mm_Pitch0.65mm | U4 |
| 1 | SWD_CONN | Pin_Headers:Pin_Header_Straight_1x06 | P2 |
| 1 | UART_CONN | Pin_Headers:Pin_Header_Straight_1x04 | P3 |
| 1 | ponface | bce:ponface | G*** |
Questions
How big is the F030 PCB?
It measures 26 × 32 mm and has 2 copper layers, 1.6 mm thick.
What parts does the F030 use?
24 parts, built around the STM32F030F4P6. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the F030 KiCad files?
From the brightcloudy/pcb repository on GitHub, at the commit this page was made from: the board is stm-boards/f030.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the F030 design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
More from brightcloudy/pcb
2- 2 layers42 × 32 mm
Similar boards
- 4 layers406 × 27.5 mm
- 2 layers50 × 50 mm
Brew buddy hardware
marcelobarrosufu/brewbuddy
Thermometer, stopwatch, step mash tool, boiling and hop additions controller in a compact instrument !
45 parts20 - 2 layers100 × 100 mm
- 2 layers17 × 21.5 mm
FlockOne
RavenLRS/Flock
Flock is an inter-craft communication system intended mainly for radio controlled vehicles
14 parts8 - 4 layers46 × 31 mm
- 2 layers20.4 × 32.3 mm
Stm32f0..f breakout
electroniceel/stm32f0..f-breakout
STM32F0..F (TSSOP20) Breakout Module
35 parts2CC-BY-4.0 - 2 layers109.6 × 44.5 mm
- 2 layers52 × 21 mm
PioneerBMWInterface
pchmura4/BMW-Pioneer_interface
Interface between BMW E46 steering wheel to control Pioneer aftermarket headunits
34 parts2AGPL-3.0