2 layers223.5 × 160 mm
4 layers30.5 × 68.6 mm
32bit-5v
bread-modular/bread-modular67Modular Synths for Everyone
- Size
- 30.5 × 68.6 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 61
- Nets
- 76
- Pads
- 272
- Tracks, vias
- 529, 69
- Pours
- 5
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 4 Oct 2024
- Updated
- 25 Oct 2026
Overview
32bit-5v is an open-source printed circuit board by bread-modular, from the bread-modular/bread-modular repository on GitHub, published under the MIT licence. It is a 4-layer board of 30.5 × 68.6 mm with 61 parts on 76 nets, routed with 529 tracks and 69 vias.
It is built around the ESP32-S3-WROOM-1U-N16R8, ES8388 and MCP6002-I/SN, with the AP2112K-3.3TRG1, K2-1808SN-A4SW-01 and CL31A107MQHNNNE among its other parts. Its parts include 23 capacitors, 22 resistors, 4 ICs, 3 switches and 1 diode. It belongs with the audio and music boards and the ESP32 boards of this library.
Main components
11
ESP32-S3-WROOM-1U-N16R8
SMD,19.2x18mm-103.5dBm -40℃~+65℃ 2.4GHz 20.5dBm 355mA 3V~3.6V 95mA Bluetooth5.0 ESP32-S3R8 UART、SDIO、SPI、I2C、GPIO、PWM、ADC、I2S、JTAG、USB SMD,19.2x18mm WiFi Modules ROHSEspressif SystemsWiFi Modules
ES8388
QFN-28-EP(4x4)-40℃~+85℃ 1.7V~3.6V 10MHz 2 24 96000Hz Audio Analog-to-Digital Converter、Audio Decoder SPI、I2C QFN-28-EP(4x4) ADCs/DACs - Special Purpose ROHSEverest-semiADCs/DACs - Special Purpose
MCP6002-I/SN
SOIC-8-40℃~+125℃ 1.8V~6V 100uA 1MHz 1pA 1pA 2 23mA 28nV/√Hz@1kHz 2uV/℃ 4.5mV 600V/ms 76dB Rail-to-Rail Input, Rail-to-Rail Output SOIC-8 Operational Amplifier ROHSMicrochip TechnologyOperational Amplifier
AP2112K-3.3TRG1
SOT-25-5-40℃~+85℃@(Ta) 1 250mV@(600mA) 3.3V 50uVrms 55uA 600mA 65dB@(1kHz) 6V Fixed Over Current Protection、Thermal Shutdown、Enable control Positive SOT-25-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSDiodes IncorporatedVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
K2-1808SN-A4SW-01
SMD,4.2x3.3mm-25℃~+85℃ 100,000 cycles 12V 2.5N 2.5mm 3.25mm 4.2mm 50mA Oval Button SPST Surface Mount,Vertical SMD,4.2x3.3mm Tactile Switches ROHSHRO ElectronicsTactile Switches
CL31A107MQHNNNE
1206100uF 6.3V X5R ±20% 1206 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSSamsung Electro-MechanicsMultilayer Ceramic Capacitors MLCC - SMD/SMT
CL21B103KBANNNC
080510nF 50V X7R ±10% 0805 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSSamsung Electro-MechanicsMultilayer Ceramic Capacitors MLCC - SMD/SMTCL21A106KAYNNNE
080510uF 25V X5R ±10% 0805 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSSamsung Electro-MechanicsMultilayer Ceramic Capacitors MLCC - SMD/SMTCL21A226MAQNNNE
080522uF 25V X5R ±20% 0805 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSSamsung Electro-MechanicsMultilayer Ceramic Capacitors MLCC - SMD/SMT
GZ2012D121TF
0805-55℃~+125℃ 1 120Ω@100MHz 150mΩ 800mA ±25% 0805 Ferrite Beads ROHSSunlordFerrite Beads
TYPE-C-31-M-12
SMD-30℃~+80℃ 1 10,000 cycles 16P 20V 5A 7.35mm Female Surface Mount, Right Angle Type-C SMD USB Connectors ROHSHRO ElectronicsUSB Connectors
README
README.mdBread Modular
An open-source hardware modular synthesizer format designed to be minimalistic and cost-effective: USB-powered, breadboard-friendly, with analog/digital modules and MIDI alongside CV & Gate.
Find your starting point
- Build or explore: modules, specification, common parts.
- Set up KiCad libraries: workspace/library setup. Projects
use the shared
opt/fp-lib-table; initialization copies local submodules rather than cloning them. - Check/export/source parts: KiCad toolkit.
Canonical tools, JLCPCB utilities and skills live under
opt/kicad-tools/.
KiCad quick start
python3 -B opt/kicad-tools/kicad_tools.py --help
python3 -B opt/kicad-tools/kicad_tools.py doctor
python3 -B opt/kicad-tools/kicad_tools.py export --helpPython + installed KiCad CLI; no extra packages for core tools. Private checks,
Gerber/BOM/CPL export, native netlist helpers and read-only sourcing have
distinct requirements and safety boundaries.
Exports are not electrical/release/order approval; keep frozen module scripts
and production designs untouched. Historical opt/kicad-jlcpcb and
.agents/skills/{kicad-workflow,jlcpcb-assembly} resolve through
relative compatibility symlinks.
Agents: start with the KiCad workflow skill or assembly skill, then actual CLI help.
Project references
Module catalog · Modular MIDI · PCB assembly
- Standalone exporter / native part-number setup
- Sourcing, audits and passive planning
- 32bit-5v sourcing / release HOLD
- 16bit-5v sourcing HOLD evidence
Project image and full feature overview
- Modular design: Just like Eurorack.
- USB-powered: It can be portable.
- Minimal design: Cost-effective.
- Modular MIDI support: Communicate between modules; CV & Gate still supported.
- Analog and digital signal paths: It’s your choice.
- Diverse built-in modules: A wide range of pre-designed modules.
- Configurable digital modules: Voice and CV using AtTiny 1616 or ESP32.
- Fully open source: Schematics, PCB designs and code.
- Ease of customization: Create modules tailored to your needs.
- No case required: Use directly on a breadboard or a simple base module.
Parts
61| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 0.1uf | Capacitor_SMD:C_0402_1005Metric | C1, C4, C6, C21, C22, C26, C34, C36, C39, C42 |
| 6 | 10uf | Capacitor_SMD:C_0402_1005Metric | C5, C27, C33, C35, C37, C38 |
| 5 | 1k | Resistor_SMD:R_0402_1005Metric | R1, R2, R9, R13, R17 |
| 5 | 33 | Resistor_SMD:R_0402_1005Metric | R7, R8, R14, R18, R26 |
| 4 | 100k | Resistor_SMD:R_0402_1005Metric | R10, R12, R16, R19 |
| 3 | K2-1808SN-A4SW-01 | BreadModular_MISC:K2-1808SN-A4SW-01 | SW1, SW2, SW4 |
| 2 | 1.5k | Resistor_SMD:R_0402_1005Metric | R5, R6 |
| 2 | 10uf | Capacitor_SMD:C_0603_1608Metric | C2, C8 |
| 2 | 4.7k | Resistor_SMD:R_0402_1005Metric | R24, R25 |
| 2 | 5.1k | Resistor_SMD:R_0603_1608Metric | R4, R11 |
| 2 | 50k | BreadModular_Pots:Potentiometer_RV09 | RV1, RV2 |
| 2 | Conn_01x05_Pin | BreadModular_MISC:Power_Connector | GND1, V_SUPPLY1 |
| 2 | Conn_01x05_Socket | Connector_PinSocket_2.54mm:PinSocket_1x05_P2.54mm_Vertical | INPUT1, OUTPUT1 |
| 1 | 10 | Resistor_SMD:R_0603_1608Metric | R15 |
| 1 | 100uf | Capacitor_SMD:C_1206_3216Metric | C7 |
| 1 | 10k | Resistor_SMD:R_0402_1005Metric | R3 |
| 1 | 10nf | Capacitor_SMD:C_0805_2012Metric | C20 |
| 1 | 10uf | Capacitor_SMD:C_0805_2012Metric | C40 |
| 1 | 1uf | Capacitor_SMD:C_0402_1005Metric | C3 |
| 1 | 22uf | Capacitor_SMD:C_0805_2012Metric | C41 |
| 1 | AP2112K-3.3 | Package_TO_SOT_SMD:SOT-23-5 | U5 |
| 1 | ES8388 | Module32:ES8388_QFN28_4x4_P0.45_EP2.6_ThermalVias | U4 |
| 1 | ESP32-S3-WROOM-1U-N16R8 | RF_Module:ESP32-S3-WROOM-1U | U1 |
| 1 | GZ2012D121TF | Capacitor_SMD:C_0805_2012Metric | FB1 |
| 1 | LED | LED_SMD:LED_0603_1608Metric | D1 |
| 1 | MCP6002-xSN | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U3 |
| 1 | USB_C_Receptacle_USB2.0_14P | Module32:HRO-TYPE-C-31-M-12 | J5 |
Questions
How big is the 32bit-5v PCB?
It measures 30.5 × 68.6 mm and has 4 copper layers, 1.6 mm thick.
What parts does the 32bit-5v use?
61 parts, built around the ESP32-S3-WROOM-1U-N16R8, ES8388, MCP6002-I/SN and AP2112K-3.3TRG1. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the 32bit-5v KiCad files?
From the bread-modular/bread-modular repository on GitHub, at the commit this page was made from: the board is modules/32bit-5v/32bit-5v.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the 32bit-5v design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
More from bread-modular/bread-modular
12- 4 layers91.4 × 68.6 mm
- 2 layers30.5 × 68.6 mm
- 2 layers30.5 × 68.6 mm
- 4 layers30.5 × 68.6 mm
- 2 layers30.5 × 68.6 mm
- 4 layers30.5 × 68.6 mm
- 2 layers30.5 × 68.6 mm
- 2 layers30.5 × 68.6 mm
- 2 layers84.3 × 74 mm
- 2 layers30.5 × 68.6 mm
- 2 layers61 × 68.6 mm
Similar boards
- 6 layers160 × 100 mm
Courant.before colored actual models 20260918T190457
KrasForge/Courant
A 2D finite-difference physical-modeling synthesis engine in structural VHDL: a vibrating membrane/plate/gong solved on FPGA fabric, with a nonlinear chaos term, playable polyphonically over MIDI/CV.
199 partsMIT - 2 layers65 × 65.5 mm
Schmatic
Yorha-7/Rocket
in this repo we are simulating rocket basic physics and make a onboard flight computer which utilizes MCU, gyro, pressure sensor, fin servo controls, to get realtime target tracking abilities to a solid fuel rocket.
77 parts - 2 layers100 × 61 mm
- 4 layers100 × 90 mm
Opentouch s3
JoeMighty/opentouch-s3
A modern remake of the Bare Conductive Touch Board: 12 capacitive touch electrodes, MP3/WAV/MIDI audio, and now WiFi, Bluetooth LE, USB-C, a proper LiPo power path, a fuel gauge, line-in, MIDI out, Qwiic and an RGB LED.
185 parts - 4 layers150 × 85 mm
DetentOne
alislaboratory/detentOne
A Customisable BLE Macropad with a Haptic Knob and OLED.
98 parts2MIT - 2 layers249 × 180.3 mm
Kicad snapshot step16 rev a layout complete 20260324 150352
jgrano/Nx-PCBA
Install all of these before opening the project:
91 parts - 2 layers24.5 × 25 mm
- 2 layers68.6 × 53.3 mm
Mie1001 daq board
Chaospossum/mie1001-daq
MIE1001 Team 5: DAQ firmware and Arduino shield designs (preamp, ADS1115, MCP4725)
40 parts