Skip to the content
2 layers03 sulfur monitoring references, the printed circuit board in 3D
Copper layers
2
Thickness
1.6 mm
Parts
38
Nets
92
Pads
226
Tracks, vias
0, 0
Routed
Not yet
KiCad
KiCad 9.0 (file 20241229)
Created
19 Nov 2025
Updated
25 Apr 2026

Overview

03 sulfur monitoring references is an open-source printed circuit board by bokumentation, from the bokumentation/STASRG-SulfurMonitoring-Hardware repository on GitHub. It is a 2-layer board with 38 parts on 92 nets.

It is built around the INA219AID and DS3231S#.

Main components

2

README

pcb/design/04_sulfurmonitoring_design_v2/README.md

..

Parts

38
QtyValueFootprintReferences
1AnemometerSTASRG_myCustom_Footprint:STASRG_AnemometerU2
1DS3231​STASRG_myCustom_Footprint:DS3231I6
1Heltec_WSL_V3STASRG_myCustom_Footprint:Heltec_WSL_V3_v1U5
1INA219STASRG_myCustom_Footprint:INA219I1
1Micro_SDCARD_v1STASRG_myCustom_Footprint:Micro_SDCARD_v1U1
1Micro_SDCARD_v2STASRG_myCustom_Footprint:Micro_SDCARD_v2U4
1SSD1306​STASRG_myCustom_Footprint:SSD1306_onBoardI4
1TB600B SO2STASRG_myCustom_Footprint:TB600B_SO2I2
1TB600C_H2SSTASRG_myCustom_Footprint:TB600C_H2SI3
1Wind_DirectionSTASRG_myCustom_Footprint:STASRG_Wind_DirU3
1uBlox_NEO-6MSTASRG_myCustom_Footprint:uBlox_NEO-6MI5

The 11 most common of 38 parts.

More from bokumentation/STASRG-SulfurMonitoring-Hardware

4
  • 2 layers90 × 150 mmTemplate spectra v1, the printed circuit board in 3D

    Template spectra v1

    bokumentation/STASRG-SulfurMonitoring-Hardware

    17 parts1
  • 2 layers90 × 150 mmTemplate spectra v1, the printed circuit board in 3D

    Template spectra v1

    bokumentation/STASRG-SulfurMonitoring-Hardware

    12 parts1
  • 2 layers52.1 × 69.9 mmTemplate spectra v1, the printed circuit board in 3D

    Template spectra v1

    bokumentation/STASRG-SulfurMonitoring-Hardware

    3 parts1

Similar boards

  • 2 layers95 × 75 mmBattery predictor, the printed circuit board in 3D

    Battery predictor

    touhidsiddiqueeraj-bit/Multi-Horizon-Hazard-Models-for-Battery-Failure-Prediction

    This study extends an existing multi-horizon hazard classification framework—originally developed for NASA 18650 cells using Histogram-based Gradient Boosting (HGB)—to three additional datasets (CALCE LCO/CX2, Oxford…

    25 parts1
  • 2 layers116.8 × 92.2 mmControllerStage, the printed circuit board in 3D

    ControllerStage

    pommen/Programmable_Load

    132 parts
  • 4 layers82.6 × 82.5 mmJumperless2, the printed circuit board in 3D

    Jumperless2

    Architeuthis-Flux/Jumperless

    A jumperless breadboard

    208 parts914
  • 4 layers82.6 × 82.6 mmJumperlessV5r8, the printed circuit board in 3D

    JumperlessV5r8

    Architeuthis-Flux/JumperlessV5

    The next generation jumperless breadboard

    650 parts332
  • 2 layers74.4 × 51.2 mmEsp32-wroom timer, the printed circuit board in 3D

    Esp32-wroom timer

    AlessandroAU/Chorus32-ESP32LapTimer

    This is an ESP32 port of the popular Chorus RF Laptimer

    66 parts102GPL-3.0
  • 2 layers169.3 × 128 mmPSU PCB, the printed circuit board in 3D

    PSU PCB

    ThomasVDD/SmartSupply

    SmartSupply is a digital battery powered lab powersupply. It is Arduino compatible and can be controlled via PC over USB.

    134 parts96
  • 4 layers100 × 54 mmKbox, the printed circuit board in 3D

    Kbox

    sarfata/kbox-hardware

    Open-source electronics for your boat

    139 parts19
  • 2 layers50 × 100 mmPSU PCB, the printed circuit board in 3D

    PSU PCB

    ThomasVDD/SmartSupplyMini

    118 parts16

Questions

What parts does the 03 sulfur monitoring references use?

38 parts, built around the INA219AID and DS3231S#. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the 03 sulfur monitoring references KiCad files?

From the bokumentation/STASRG-SulfurMonitoring-Hardware repository on GitHub, at the commit this page was made from: the board is pcb/design/01_module_references/03_sulfur_monitoring_references.kicad_pcb and its schematic pcb/design/01_module_references/03_sulfur_monitoring_references.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the 03 sulfur monitoring references design in my own project?

Its repository states no licence, so its author keeps all rights: ask bokumentation before reusing the design.